etcher | Flash OS images to SD cards & USB

 by   balena-io TypeScript Version: v1.18.8 License: Apache-2.0

kandi X-RAY | etcher Summary

kandi X-RAY | etcher Summary

etcher is a TypeScript library typically used in Internet of Things (IoT), Raspberry Pi applications. etcher has no bugs, it has no vulnerabilities, it has a Permissive License and it has medium support. You can download it from GitHub.

Flash OS images to SD cards & USB drives, safely and easily. Etcher is a powerful OS image flasher built with web technologies to ensure flashing an SDCard or USB drive is a pleasant and safe experience. It protects you from accidentally writing to your hard-drives, ensures every byte of data was written correctly, and much more. It can also directly flash Raspberry Pi devices that support USB device boot mode. Download | Support | Documentation | Contributing | Roadmap.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              etcher has a medium active ecosystem.
              It has 25728 star(s) with 1894 fork(s). There are 428 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 427 open issues and 1622 have been closed. On average issues are closed in 124 days. There are 14 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of etcher is v1.18.8

            kandi-Quality Quality

              etcher has 0 bugs and 0 code smells.

            kandi-Security Security

              etcher has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              etcher code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              etcher is licensed under the Apache-2.0 License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              etcher releases are available to install and integrate.
              Installation instructions are not available. Examples and code snippets are available.
              It has 62 lines of code, 0 functions and 76 files.
              It has low code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of etcher
            Get all kandi verified functions for this library.

            etcher Key Features

            No Key Features are available at this moment for etcher.

            etcher Examples and Code Snippets

            No Code Snippets are available at this moment for etcher.

            Community Discussions

            QUESTION

            Better alternative for Etcher to burn iso
            Asked 2021-Mar-25 at 09:17

            Better alternative for Etcher to burn iso?

            Can you recommend something because Etcher let me down for the first time, so I'm looking for a reliable alternative.

            ...

            ANSWER

            Answered 2021-Mar-25 at 09:17

            I recommend UltraISO, it always works great.

            This is a complex program that has many additional functions.

            Source https://stackoverflow.com/questions/66796294

            QUESTION

            Keyboard problem on Lichee Pi Zero with kernel 5.2+
            Asked 2020-Sep-29 at 16:51

            My question is about Lichee Pi Zero board (based on Allwinner/Sunxi V3s SoC).

            Initially I used pre-built Linux image (kernel 4.10.02), it has no built-in Wi-Fi support (for Realtek 8327BS chip), so I downloaded the latest kernel version from here and built it with the default settings.

            LCD is ok, Wi-fi looks good too (LED is blinkikng), but I cannot use keyboard anymore - there is no reaction from OS, when I connect something to USB (no message and no input from keyboard).

            Hardware is OK and works good with the old Linux image. I have also tried the latest kernel from kernel.org with the same bad result.

            Please help to understand the reason. I suppose bad settings, but HID supoort is enabled.

            Update 1. I establish connection through UART. As I see, some USB features are detected during boot:

            I'm able to load some drivers using insmod also: Unfortunately, Linux still does not recognize any USB Device. I have connected mouse, keyboard, hub, mass storage and got no reaction from OS. It looks like devices do not get power (there is no light from mouse).

            Update 2. The best way I have found at the moment is to use buildroot-licheepi-zero. It's very easy to use:

            ...

            ANSWER

            Answered 2020-Sep-29 at 16:51

            The best solution is to use Buildroot. Please check updates at topic start for details.

            Source https://stackoverflow.com/questions/63792551

            QUESTION

            How to recover a memory stick damaged by BalenaEtcher flashing software?
            Asked 2020-Mar-17 at 12:04

            While using the BalenaEtcher software, It somehow killed my USB stick.

            Recovery using the Windows' Disk Management Proved to be impossible as any operation done on the said disk would result in an unexpected error thrown by Windows.

            Trying to Recover it using Balena's guide to recovering broken devices -which is a guide on using diskpart to clean the device- proved useless as well.

            ...

            ANSWER

            Answered 2020-Mar-17 at 12:04

            This might be what some call a "hacky" solution to the problem posted above, but is the only one I found.

            The software Rufus proved to be the solution to how problem would be resolved.

            1. Stick the USB device into the USB port.
            2. Download The software from the Rufus' website.
            3. Use an OS image (any will suffice) to allow Rufus to be able to work.
            4. Hit start and allow Rufus to format your USB device, it will however install the chosen operating system on it.
            5. Do a manual format using Windows Explorer or Windows Disk Management software.
            6. Your USB device should be fixed.

            Source https://stackoverflow.com/questions/60722042

            QUESTION

            Arrow Commands in Python Turtle
            Asked 2020-Jan-28 at 20:50

            I have been trying to put turtle in tkinter using the canvas feature. I want to be able to make a turtle etcher sketcher thing so that I can control the turtle with arrow keys. I cannot seem to get it to work and don't understand the error it spits out:

            NameError: name 'Screen' is not defined

            Here is my code:

            ...

            ANSWER

            Answered 2020-Jan-28 at 11:46

            QUESTION

            Cannot Use Raspberry Pi Camera v1/2 with Gumstix Pi Compute Dev Board
            Asked 2020-Jan-02 at 21:28

            Referencing this item:

            https://store.gumstix.com/gumstix-pi-compute-dev-board.html

            I cannot use the official Pi camera(s) using either the official Raspberry Pi "Buster" disk image or the Pi disk image provided by Gumstix:

            Disk image referenced here--> https://store.gumstix.com/raspberry-pi-cm-fast-flash.html

            Note: The Gumstix Pi image would "hang" on the rainbow colored splash screen during boot, using the image above. I am using the "fast flash" board to write the images, and have been able to repeatedly (successfully) install the standard Raspbian OS. FYI I have been using Balena Etcher, and it has worked with my other boards.

            Also, I followed the official instructions to add camera support in an attempt to understand what I am doing wrong. vcgencmd initially reported no support or detection in raspbian. I was able to add camera support using the blobs mentioned here (I compliled manually and also used the precompiled variant):

            https://www.raspberrypi.org/documentation/hardware/computemodule/cmio-camera.md

            Final result:

            vcgencmd get_camera : supported=1 detected=0

            Lastly, yes the camera is enabled, and I have tested the cam/cable on other systems with no issues. I suspect the pin GPIO settings may be to blame, but based on the information in front of me (for this board) I should not be expecting to manually adjust those params. Thanks for any insight….hopefully this is an I-D-10-T error.

            ...

            ANSWER

            Answered 2020-Jan-02 at 21:28

            First off I should appologize, the page you referenced about getting the disk image is very out of date. We will work to update it soon.

            My guess of why it's not booting is likely a hardware imcompatibilty, are you using a Raspberry Pi CM3+?

            Give this image a try

            https://gumstix-raspbian.s3.amazonaws.com/2019-12-29/raspberrypi-cm3/rpi-4.19.y/2019-09-26-raspbian-buster-lite.img.xz

            That's a recently compiled Buster image that has some extra drivers added in to support Geppetto modules. The default Buster image should also work.

            To properly support any of our boards, it's best to download the board support package for that particular design. In your case, you're using the Gumstix Pi Compute Dev Board, which can be found

            https://geppetto.gumstix.com/#!/design/1045/

            Please go to that page and click on the "AutoBSP" button on the top. That will prompt you to download a zip file that will contain some instructions and files needed to configure the Raspberry Pi.

            Please let me know if you have any trouble.

            Thanks,

            Andrew

            Source https://stackoverflow.com/questions/59569192

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install etcher

            You can download it from GitHub.

            Support

            Note: Etcher will run on any platform officially supported by Electron. Read more in their documentation.
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/balena-io/etcher.git

          • CLI

            gh repo clone balena-io/etcher

          • sshUrl

            git@github.com:balena-io/etcher.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link