Adafruit_SSD1306 | Arduino library for SSD1306

 by   adafruit C++ Version: 2.5.7 License: Non-SPDX

kandi X-RAY | Adafruit_SSD1306 Summary

kandi X-RAY | Adafruit_SSD1306 Summary

Adafruit_SSD1306 is a C++ library typically used in Internet of Things (IoT), Raspberry Pi, Arduino applications. Adafruit_SSD1306 has no bugs, it has no vulnerabilities and it has medium support. However Adafruit_SSD1306 has a Non-SPDX License. You can download it from GitHub.

This is a library for our Monochrome OLEDs based on SSD1306 drivers. Pick one up today in the adafruit shop! ------> These displays use I2C or SPI to communicate, 2 to 5 pins are required to interface.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              Adafruit_SSD1306 has a medium active ecosystem.
              It has 1552 star(s) with 935 fork(s). There are 132 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 40 open issues and 100 have been closed. On average issues are closed in 75 days. There are 22 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of Adafruit_SSD1306 is 2.5.7

            kandi-Quality Quality

              Adafruit_SSD1306 has 0 bugs and 0 code smells.

            kandi-Security Security

              Adafruit_SSD1306 has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              Adafruit_SSD1306 code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              Adafruit_SSD1306 has a Non-SPDX License.
              Non-SPDX licenses can be open source with a non SPDX compliant license, or non open source licenses, and you need to review them closely before use.

            kandi-Reuse Reuse

              Adafruit_SSD1306 releases are available to install and integrate.
              It has 31 lines of code, 1 functions and 1 files.
              It has low code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of Adafruit_SSD1306
            Get all kandi verified functions for this library.

            Adafruit_SSD1306 Key Features

            No Key Features are available at this moment for Adafruit_SSD1306.

            Adafruit_SSD1306 Examples and Code Snippets

            No Code Snippets are available at this moment for Adafruit_SSD1306.

            Community Discussions

            QUESTION

            Python script module not found on rerun of script
            Asked 2022-Feb-01 at 20:37

            I am running a python script on RaspberryPi 4, and today when I ran the script again, it showed me the error ModuleNotFoundError: No module named 'adafruit_ssd1306' although I ran this same script yesterday about 10 times, it ran perfectly without any errors. I did not change anything in the script, not even its location. I tried force reinstalling the library, running the script from another location, rebooting the pi, running it as sudo but none of them worked either. By using pip3 freeze it shows that the package is installed and trying to install the package again says that the requirement is already satisfied.

            Python version: 3.7

            Main.py

            ...

            ANSWER

            Answered 2022-Jan-30 at 06:49

            1- make sure you typed the name of module correctly

            2- make sure you use the correct python version

            python3:

            Source https://stackoverflow.com/questions/70902588

            QUESTION

            EEPROM with ESP32-WROOM-32
            Asked 2021-Oct-10 at 19:56

            Beginner in Arduino and ESP-32 needs help.

            I bought an ESP32-WROOM-32 and i realize that there are some things who are not the same comparing to Arduino Nano,UNO or Mega. One of the things that i realized who are diferent is how to store and read data from the controler. I want to save some data to EEPROM, to retain that value even when the device is switched OFF.

            I have the following code that i use all the time in mine little projekts whit Arduino Boards. The code consist in creating a Oled Menu where i can navigate true pages and change Int values and this values are stored in the EEprom.

            The same code i uploaded to the esp32 without any problem and the Menu works fine. I can change the Int values. The problem is that after switching OFF/ON the board the values are not persistence.

            I was looking already some turturials in the Internet about EEprom and ESP32 and tried to implement it , but unfortnally without result.

            ...

            ANSWER

            Answered 2021-Oct-10 at 17:07

            First thing to know is that, unlike Arduino, the ESP32 doesn't have an EEPROM. Instead it emulates it using flash storage. The EEPROM library for the ESP32 is deprecated; new code should use the Preferences library. You can also persist data using the filesystem if you want.

            To answer the question:

            First, you should call EEPROM.begin() at the start of the program. So:

            Source https://stackoverflow.com/questions/69517079

            QUESTION

            Display SSD1306 stops working after a short while on esp32
            Asked 2021-Sep-16 at 07:40

            I'm currently working on a sensor box, that displays the sensor data non stop in the loop of a ESP32 Node MCU on a SSD1306 Display, connected over I2C (21 and 22). But then the display does weird stuff.

            I can't share all of the ESP32 Code right now, but this should be all the needed stuff anyways I guess:

            ...

            ANSWER

            Answered 2021-Sep-16 at 07:40

            Apparently the problem was, there were too many devices connected over the same I2C bus. So what fixed this:

            • Instead of soldering Display, two Sensors and a real time clock to GPIO 21 and 22, I soldered the display to GPIO 32 and 33.

            • Added Wire1.begin(32, 33); to setup

            • Changed constructor of display to Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire1, -1);

            I guess the display stops working as soon as there is too much traffic on the bus. So this was not a memory problem

            Source https://stackoverflow.com/questions/69179397

            QUESTION

            Writing a wrapper for OLED SSD1306
            Asked 2021-May-12 at 23:27

            I'm struggling to learn Arduino's C++ right now. I'm trying to write a simple wrapper so I can use multiple OLED's on my project. Here is what I've got so far :

            ...

            ANSWER

            Answered 2021-May-12 at 23:27

            QUESTION

            Break while loop in GPIO.RPi callback event
            Asked 2020-Jul-21 at 06:07

            I've been trying to solve this problem for hours, to no avail. So, I've been trying to run an OLED screen for showing the weather, time, etc. I wrote the script with a while loop so it can run virtually forever. However, I also want to be able to start the script with a GPIO pull-up, and end it with yet another high GPIO pin. Using the on-off script to start the OLED script works flawlessly with variables, yet the script seems to be blind to the variable changes my "Off-GPIO" tries to introduce. Here's my code:

            ...

            ANSWER

            Answered 2020-Jul-21 at 06:07

            Alright, after some tinkering, I found a solution! I discovered that RPi.GPIO has a simple way to check a pin's state with input.GPIO(channel). [This teached me a valuable lesson: Always read the documentation] I just did some simple if and while statements to solve my issue. This way has its caveats on its own, but it does what I want it to do.

            Source https://stackoverflow.com/questions/62977797

            QUESTION

            Problem with calling constructor outside the setup() in Arduino
            Asked 2020-May-07 at 13:38

            I had a OLED SPI display 128x64 and I was using Adafruit_GFX and Adafruit_SSD1306 to control it. I had a class name Engine which had a public constructor like this:

            ...

            ANSWER

            Answered 2020-May-07 at 12:49

            If you need Engine to be available outside of setup(), you could instead have a method like the following

            Source https://stackoverflow.com/questions/61657029

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install Adafruit_SSD1306

            You can download it from GitHub.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries

            Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link