ronn | Randomized overdrive neural networks

 by   csteinmetz1 C++ Version: Current License: Apache-2.0

kandi X-RAY | ronn Summary

kandi X-RAY | ronn Summary

ronn is a C++ library. ronn has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. You can download it from GitHub.

Throughout audio technology history, engineers, circuit designers, and guitarists have searched tirelessly for novel, extreme, and exciting effects as a result of clipping audio signals. Whether it be vacuum tubes (valves), diodes, transistors, op-amps, microchips, or broken speaker drivers doing the distorting, it seems that we have tried them all. But maybe there is at least one area left relatively under-explored, and thats the realm of neural networks. Now neural networks, have been a round for a bit. They have actually ALREADY been used to model distortion and overdrive effects from guitar amplifier and pedals quite a bit (such as here, here, here, and here). So then you may be asking, "well how is this any different?" And the answer is, ronn doesn't model ANY pre-existing audio circuit, we don't even bother to train anything! Instead we treat the concept of the neural network as a system which can distort a signal, and then we give the user control over that system to explore new effects. Get your hands dirty building neural networks without even touching TensorFlow or PyTorch.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              ronn has a low active ecosystem.
              It has 76 star(s) with 5 fork(s). There are 1 watchers for this library.
              OutlinedDot
              It had no major release in the last 6 months.
              There are 2 open issues and 0 have been closed. There are no pull requests.
              It has a neutral sentiment in the developer community.
              The latest version of ronn is current.

            kandi-Quality Quality

              ronn has no bugs reported.

            kandi-Security Security

              ronn has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

            kandi-License License

              ronn is licensed under the Apache-2.0 License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              ronn releases are not available. You will need to build from source code and install.
              Installation instructions, examples and code snippets are available.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of ronn
            Get all kandi verified functions for this library.

            ronn Key Features

            No Key Features are available at this moment for ronn.

            ronn Examples and Code Snippets

            No Code Snippets are available at this moment for ronn.

            Community Discussions

            QUESTION

            Combine values from duplicated rows into one based on condition (in R)
            Asked 2021-Jun-15 at 16:51

            I have a dataset with the name of Danish ministers and their position from 1990 to 2020 (data comes from dataset called WhoGovern; https://politicscentre.nuffield.ox.ac.uk/whogov-dataset/). The dataset consists of the ministers name, the ministers position, the prestige of that position, and the year in which the minister had that given position.

            My problem is that some ministers are counted twice in the same year (i.e., the rows aren't unique in terms of name and year). See the example in the picture below, where "Bertel Haarder" was both Minister of Health and Minister of Interior Affairs in 2010 and 2021.

            I want to create a dataset, where all the rows are unique combinations of name and year. However, I do not want to remove any information from the dataset. Instead, I want to use the information in the prestige column to combine the duplicated rows into one. The observations with the highest prestige should be the main observations, where the other information should be added in a new column, e.g., position2 and prestige2. In the example with Bertel Haarder the data should look like this:

            (PS: Sorry for bad presenting of the tables, but didn't know how to create a nice looking table...)

            Here's the dataset for creating a reproducible example with observations from 2010-2020:

            ...

            ANSWER

            Answered 2021-Jun-08 at 14:04

            Reshape the data to wide format twice, once for position and the other for prestige_1, and join the two results.

            Source https://stackoverflow.com/questions/67888166

            QUESTION

            Visible raw file in github private repositories using git large files
            Asked 2021-May-26 at 01:23

            I’m using git large files in one of my github private repositories and all was just good, but when I copy and paste the link for the raw data in an unlogged browser it was possible to see it. Is there a way to solve this problem?

            In git large files page there is a topic saying “Keep the same access controls and permissions for large files as the rest of your Git repository when working with a remote host like GitHub.”

            Is that true? Is there a way to configure the repo to hidden my information? I’ve tried to understand one of glfs tutorials but couldn’t find the ansewr.

            ...

            ANSWER

            Answered 2021-May-26 at 01:23

            The link you've posted contains a token in the URL. That token exists to make it possible to view the raw URL even though the URL is on a different domain, and it contains credentials to permit someone to view that file.

            Normally, the access to Git LFS files is restricted to the same access as the rest of your repository. Only parties who can read the files in your repository can get a valid raw data link like you've gotten, so as long as you don't distribute links to files in your private repository, you should be fine.

            The token in the URL is specific to a file and a user, and usually it is sufficient to change your password to expire all the links.

            Source https://stackoverflow.com/questions/67697354

            QUESTION

            Git lfs removed code from every single file - Kotlin
            Asked 2021-Apr-17 at 21:20

            I was using git lfs for some large files as I had committed prior to use it, so I had to use git lfs migrate import as provided here which re-wrote the commits and then I was able to push it on the server. But, in turn, it has changed whole project's every .kt, .xml file to these 3 lines:

            ...

            ANSWER

            Answered 2021-Apr-17 at 21:20

            I've solved the issue which was new for me. It might help others.

            So, What I wanted to do was to support large files, I used git lfs but as I had already committed the code, I had to use git lfs migrate import which edits already committed changes and add the "supposedly" big files to its repository capable to store large files.

            But, this command added all the files and provided a pointer as mentioned in the comments by Torek.

            I read their help docs and to resolve the issue, first I ran a command git lfs checkout which brings back the original content of the files from the repo to local files and then I removed all type of files added to .gitattributes except few for which I used git lfs on the first place. git lfs works with .gitattributes.

            Then, I just did a new commit and push and everything works fine now. Hell of a journey at midnight, blew my sleep.

            Source https://stackoverflow.com/questions/67142644

            QUESTION

            pip3 can't install jq on macOS due to ruby dependencies
            Asked 2021-Apr-10 at 21:01

            I am trying to install a specific jq version in my virtual pyenv environment with the command below:

            ...

            ANSWER

            Answered 2021-Apr-10 at 00:46

            I did not expect this, but this issue has been resolved after I updated pip3 with this command:

            Source https://stackoverflow.com/questions/67027634

            QUESTION

            Docker connectivity issues (to Azure DevOps Services from self hosted Linux Docker agent)
            Asked 2021-Feb-10 at 22:19

            I am looking for some advice on debugging some extremely painful Docker connectivity issues.

            In particular, for an Azure DevOps Services Git repository, I am running a self-hosted (locally) dockerized Linux CI (setup according to https://docs.microsoft.com/en-us/azure/devops/pipelines/agents/docker?view=azure-devops#linux), which has been working fine for a few months now.

            All this runs on a company network, and since last week the network connection of my docker container became highly unstable:

            • Specifically it intermittently looses network connection, which is also visible via the logs of the Azure DevOps agent, which then keeps trying to reconnect.

            • This especially happens while downloading Git LFS objects. Enabling extra traces via GIT_TRACE=1 highlights a lot of connection failures and retries:

              trace git-lfs: xfer: failed to resume download for "SHA" from byte N: expected status code 206, received 200. Re-downloading from start

            • During such a LFS pull / fetch, sometimes the container even stops responding as a docker container list command only responds:

              Error response from daemon: i/o timeout

              As a result the daemon cannot recover on its own, and needs a manual restart (to get back up the CI).

            Also I see remarkable differences in network performance:

            • Manually cloning the same Git repository (including LFS objects, all from scratch) in container instances (created from the same image) on different machines, takes less than 2mins on my dev laptop machine (connected from home via VPN), while the same operation easily takes up to 20minutes (!) on containers running two different Win10 machines (company network, physically located in offices, hence no VPN.
            • Clearly this is not about the host network connection itself, since cloning on the same Win10 hosts (company network/offices) outside of the containers takes only 14seconds!

            Hence I am suspecting some network configuration issues (e.g. sth with the Hyper-V vEthernet Adapter? Firewall? Proxy? or whichever other watchdog going astray?), but after three days of debugging, I am not quite sure how to further investigate this issue, as I am running out of ideas and expertise. Any thoughts / advice / hints?

            I should add that LFS configuration options (such as lfs.concurrenttransfers and lfs.basictransfersonly) did not really help, similarly for git config http.version (or just removing some larger files)

            UPDATE

            it does not actually seem to be about the self-hosted agent but a more general docker network cfg issue within my corporate network.

            Running the following works consistently fast on my VPN machine (running from home):

            ...

            ANSWER

            Answered 2021-Feb-10 at 22:19

            The whole issue "solved itself" when my company decided to finally upgrade from Win10 1803 to 1909 (which comes with WSL, replacing Hyper-V) .. 😂 Now everything runs supersmoothly (I kept running these tests for almost 20 times)

            Source https://stackoverflow.com/questions/66005536

            QUESTION

            Remove Git LFS with filter-branch? (Can't re-add unchanged file to index.)
            Asked 2020-Jan-04 at 08:31

            Trying to migrate a repo (including history) OUT of Git LFS.

            I ran git lfs migrate export --include="*" --everything (mentioned here) on a test repo, but it didn't work as expected and left LFS pointer files instead of converting them all to objects.

            I tried alternative methods, following this. Unfortunately it still left pointer files, so I combined it with this.

            In the end, I even ran all the commands together:

            ...

            ANSWER

            Answered 2020-Jan-04 at 08:31
            1. Do a git lfs migrate export --everything --include . to replace all the LFS pointers by the real files in the git history. For more details, see http://stackoverflow.com/a/57681990/717372

            2. Run git lfs uninstall to remove lfs hooks.

            3. And verify that the .gitattributes has the lfs filters removed.

              If the lfs filters were not removed, and if .gitattributes was only needed for LFS, delete the file in all of history with:

            Source https://stackoverflow.com/questions/59551850

            QUESTION

            git lfs ls-files -I filter doesn't work with non-ASCII folder names
            Asked 2019-Sep-13 at 00:27

            git lfs ls-files -I filter seems not to work with non-ASCII folder names even when the filter is passed in octal encoding, as can be confirmed with the bash script below:

            ...

            ANSWER

            Answered 2019-Sep-13 at 00:27

            Currently, specifying a file name with -I using non-ASCII characters is broken. There's an open pull request to fix it which will be included in Git LFS 2.9.0.

            Source https://stackoverflow.com/questions/57909243

            QUESTION

            How can I update a table using MySQL while using search in another table
            Asked 2019-Mar-12 at 17:47

            Table panel & panelists have 1 column in common. called user_id where it's an integer for example

            table panel:

            ...

            ANSWER

            Answered 2019-Mar-12 at 15:40
            UPDATE panelists 
            SET email_active = '2' 
            WHERE user_id in (
              SELECT user_id
              FROM panel 
              WHERE email LIKE '%dummy.com'
            );
            

            Source https://stackoverflow.com/questions/55125273

            QUESTION

            How can I tell if a file will be uploaded to git lfs correctly?
            Asked 2019-Jan-31 at 06:48

            I'm trying to add everything under MyProject/Frameworks/ to git-lfs (large file storage). I'm not sure what the proper format for matching all files and folders recursively under the Frameworks folder is. This answer says the proper format is git lfs track "MyProject/Frameworks/**", but Atlassian's help document says I should use git lfs track "MyProject/Frameworks/". I tried both and they didn't use git lfs for storage. It tried uploading files directly.

            Sure, I'd love to know the proper format, but more importantly, before I attempt to push my changes to github, I'd like to verify that the match and files do indeed work correctly. This'll allow me to iterate and try new things.

            I see two related commands that might help: git lfs status and git lfs ls-files. It's not clear which one I should be using and what output I should be looking for. For example, when I ran git lfs status, it showed me a ton of files under Git LFS objects to be committed, making me think they would be added to Git LFS. However, after attempting to push to GitHub.com, I realized that it was clearly not the case. If it helps, the output for these files always had something like (Git: edee1ad) after each file name.

            When I attempt to use git lfs ls-files I'm not sure if I need to run it after git adding the files, after committing them, or after pushing them. Most of the time it's just showing me blank output.

            Essentially the question is: If I configured git lfs correctly, what tool (e.g. git lfs status) should I use, and what output should I look for before I attempt to commit/push?

            Note: Please don't answer the question with only how to match all recursive files as that will help me once (this specific case), rather than allowing me to iterate and try new things (any case).

            ...

            ANSWER

            Answered 2019-Jan-31 at 06:48

            TL;DR

            If everything is set up correctly, you can verify that git LFS is going to work properly by:

            1. git add the file(s) in question.
            2. Do one of the following:
              • Run git lfs status and ensure the file(s) in question appear under Git LFS objects to be committed, and that they have the LFS value in parenthesis; or
              • Run git lfs ls-files and ensure the file(s) in question appear in this output.

            ⚠️ Important: After running git lfs track, you must run git add to refresh the state of files before calling git lfs status or git lfs ls-files. Otherwise you'll see irrelevant output from those commands.

            Also, for the record, looks like git lfs track "MyProject/Frameworks/**" is the correct one for recursive matching.

            Set up and testing methodology:

            1. git lfs track "*.lfs". This generates .gitattributes. Leave it unstaged.
            2. Create a file in the root directory, Test.lfs. Leave it unstaged.
            3. Test:

              • git lfs status: no filenames output

            Source https://stackoverflow.com/questions/54451856

            QUESTION

            Get JSON response from API using PHP, format the JSON data into HTML using Javascript
            Asked 2018-Oct-15 at 00:31

            I'm very new to coding.

            I'm using PHP to get a JSON response from an API. The JSON response consists of Titles and URLs to pages on the web. The sample JSON response is at the bottom of the page.

            How do I write each item in this JSON data using PHP to my HTML page in the body tag? I want to create HTML "a" tags with the text being the JSON name value and the href being the JSON url value for each item.

            Where does the JSON data end up after I get it from the API using PHP, and then how do I access it and format it with PHP? I'm using PHP to keep my API access key server side so the client can't see it. Here is my code:

            ...

            ANSWER

            Answered 2018-Oct-14 at 22:32

            To print the data, you can use:

            Source https://stackoverflow.com/questions/52807231

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install ronn

            We supply pre-built VST/AU plugins here.
            You can also build from source. This will require that you have JUCE v5 installed. Then you need to install libtorch (PyTorch C++ API).
            Download the .zip file containing the source.
            Unzip this and place the libtorch directory into the plugin directory.
            Change to the root of the plugin project.
            Now update CMakeLists.txt to reflect to correct paths.
            Run the build.sh script, which will build the plugin.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/csteinmetz1/ronn.git

          • CLI

            gh repo clone csteinmetz1/ronn

          • sshUrl

            git@github.com:csteinmetz1/ronn.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Consider Popular C++ Libraries

            tensorflow

            by tensorflow

            electron

            by electron

            terminal

            by microsoft

            bitcoin

            by bitcoin

            opencv

            by opencv

            Try Top Libraries by csteinmetz1

            auraloss

            by csteinmetz1Python

            pyloudnorm

            by csteinmetz1Python

            steerable-nafx

            by csteinmetz1Jupyter Notebook

            wavebeat

            by csteinmetz1Python

            AutomaticMixingPapers

            by csteinmetz1HTML