FLINT | Full Lands INtegration Tool : a modular system

 by   moja-global C++ Version: 1.1.0 License: Non-SPDX

kandi X-RAY | FLINT Summary

kandi X-RAY | FLINT Summary

FLINT is a C++ library. FLINT has no bugs, it has no vulnerabilities and it has low support. However FLINT has a Non-SPDX License. You can download it from GitHub.

The Full Lands Integration Tool (FLINT) is a C++ framework that combines satellite and ground data in ways that meet policy needs. It is based on over 20 years of experience building and operating integration tools in Australia and Canada. It's an Open-source Library maintained under moja.global, a project under the Linux Foundation.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              FLINT has a low active ecosystem.
              It has 37 star(s) with 52 fork(s). There are 9 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 15 open issues and 18 have been closed. On average issues are closed in 36 days. There are 14 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of FLINT is 1.1.0

            kandi-Quality Quality

              FLINT has 0 bugs and 0 code smells.

            kandi-Security Security

              FLINT has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              FLINT code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              FLINT has a Non-SPDX License.
              Non-SPDX licenses can be open source with a non SPDX compliant license, or non open source licenses, and you need to review them closely before use.

            kandi-Reuse Reuse

              FLINT releases are available to install and integrate.
              Installation instructions are available. Examples and code snippets are not available.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of FLINT
            Get all kandi verified functions for this library.

            FLINT Key Features

            No Key Features are available at this moment for FLINT.

            FLINT Examples and Code Snippets

            No Code Snippets are available at this moment for FLINT.

            Community Discussions

            QUESTION

            Error while loading shared object file: No such file or directory
            Asked 2022-Mar-20 at 11:42

            I am trying to generate a usable binary for GCBM, a C++ carbon accounting tool. The binary has been generated from a GitHub Action workflow which is available as an artifact here: https://nightly.link/HarshCasper/moja.canada/actions/runs/1999997115/GCBM.zip

            I downloaded the ZIP, unzipped it inside a gcbm directory, cd inside it, and tried launching the binary through:

            ...

            ANSWER

            Answered 2022-Mar-18 at 06:59

            From the error, it's clear library path that the executable looking for is not present. It happens sometimes if the executable compiled on another system takes a hardcoded library path that is not present on your system. The solution is you have to compile source on your system. Better compile it with a STATIC library. Make changes to Cmake(https://github.com/HarshCasper/moja.canada/blob/bffb196222e118e6797afa2bedab02dbe29dd330/Source/CMakeLists.txt#L47). or copy shared library to proper path.

            Source https://stackoverflow.com/questions/71522737

            QUESTION

            How to create Polynomial Ring which has Float coefficients Julia
            Asked 2022-Jan-18 at 23:30

            I want to create a polynomial ring which has float Coefficients like this. I can create with integers but, Floats does not work.

            ...

            ANSWER

            Answered 2022-Jan-18 at 23:30

            While I do not have previous experience with this particular (from appearances, rather sophisticated) package Oscar.jl, parsing this error message tells me that the function you are trying to call is being given a BigFloat as input, but simply does not have a method for that type.

            At first this was a bit surprising given that there are no BigFloats in your input, but after a bit of investigation, it appears that the culprit is the following

            Source https://stackoverflow.com/questions/70763117

            QUESTION

            Extracting text from a JSON file into specified output using Python
            Asked 2022-Jan-05 at 15:58

            I have a JSON text file from Qualitrics that looks like this (for example, this is one variable I pulled from the text):

            ...

            ANSWER

            Answered 2022-Jan-04 at 22:25

            The QuestionText and QuestionID fields are nested within the Payload dictionary. You need to index into that dictonary before accessing those fields.

            Your print should look like the following:

            Source https://stackoverflow.com/questions/70584073

            QUESTION

            Wordpress Contact Form 7 dynamically autoselect dropdown field based on referral url
            Asked 2021-Dec-19 at 11:32

            I have been working off of these two answers:

            Wordpress Contact Form 7 dynamically select dropdown field based on url

            Auto-select fields in Contact form 7 based on referral link

            Currently, the code below is pasted in the CSS block on the /contact page:

            ...

            ANSWER

            Answered 2021-Dec-19 at 04:19

            Watch the funny stylish quotes (, , and ) that you have. Those will break JS. Remove them from the HTML markup and CSS as well.

            Beyond that, the expected value for the second argument of the .prop() method is a boolean (true or false), so that would be:

            Source https://stackoverflow.com/questions/70408389

            QUESTION

            Javascript How to get Nested Objects Correctly
            Asked 2020-Oct-29 at 21:34

            I am building an Electron app that gets a certain kind of json file from the user and logs all the data from it. But I am getting an error about getting undefined from the quantity: Json File:

            ...

            ANSWER

            Answered 2020-Oct-24 at 11:06

            This code is to access or process the values that are in nested array.we are iterating with loops and checks the iterating values that either it is an array or not with .isArray if yes we fetch the value ,if no we return the value.

            Source https://stackoverflow.com/questions/64510311

            QUESTION

            How does the BIOS initialize the screen?
            Asked 2020-Sep-26 at 06:27

            how does the BIOS Initialize the Screen? I'm looking for an answer I've been searching through the web but, can't find something... but, I've found a website! but, it says here that the is initialized to address C000h. is the video card really hard wired to the memory address C000h? please enlighten me and TY in advance... :D

            ...

            ANSWER

            Answered 2020-Sep-26 at 06:27

            is the video card really hard wired to the memory address C000h?

            You are talking about the video BIOS, not about the screen memory?

            In early IBM computers (like the "PC", the "XT" or the "AT"), the 128K addresses range from C000h:0h to D000h:FFFFh (this is the linear address range C0000h to DFFFFh) was intended for the firmware (BIOS) of add-on cards which were not supported by the "on-board" BIOS.

            The first 32K (C0000h to C7FFFh) of this address range were reserved for video cards that were not supported by the on-board BIOS; the remaining 96K could be used by other types of cards (such as SCSI hard-disk controllers or network cards supporting booting from the network).

            How does the BIOS Initialize the Screen?

            For computers with an on-board video card, this is done by the BIOS itself. In the technical reference manual of the "IBM PCjr" (a computer sold in 1983), you'll find the source code of such a BIOS.

            When the BIOS starts up the computer, it is searching for add-on cards which have a firmware in the 128K address range mentioned above.

            It detects the firmware of the video card and runs this firmware.

            The reason why a video card has an own firmware is simple:

            Especially for video cards providing more than VGA (16 colors at 640x480 pixels and 256 colors at 320x200 pixels) the initialization sequence is depending from manufacturer to manufacturer.

            So for modern computers you cannot answer the "generic" question: "How does the BIOS initialize the screen?", but you could only answer the question how this is done for a certain manufacturer.

            However, I suspect that most video cards' firmwares would put the card into a state where the card behaves like a VGA card, put the card into BIOS video mode 3 (80x25 text), fill the video memory with space characters (so the screen is empty) and put the text cursor to the top left corner.

            Source https://stackoverflow.com/questions/64073757

            QUESTION

            Documentation on HERE api responses
            Asked 2020-Jun-28 at 02:26

            I am using the Routing API v8 to get instructions on how to get from one point to the other. I want to provide the user with a time and distance estimate.

            Still trying to figure out how to get the distance, but for the time, I have been adding the "duration" fields but the result is very different from what I experience in that route. Additionally, there are also other fields in the response that I am not very sure about their meaning. For example, in the below response:

            ...

            ANSWER

            Answered 2020-Jun-28 at 02:26

            Regarding to the properties, you can find them in the OpenAPI specifition document here

            E.g., for "offset", it is a property for a few actions (like TurnAction in the spec), offset: description: Offset of a coordinate in the section's polyline. type: integer

            Regarding to distance, it should be in the summary section.

            For a route which duration is not expected, we will need a deeper analysis. Please provide the exact API call you used in the comment, and we can run a check on that.

            Also, please feel free to try our refclient here for a quick feeling of our Routing APIs and varies parameters.

            Source https://stackoverflow.com/questions/62612994

            QUESTION

            How do I grab information from an API?
            Asked 2020-May-20 at 19:32

            So I ran into some problem when I tried to get information from an API, I can grab the names of each product, but well for one: When I try to return the "float" value (the price of the product) I get this error: TypeError: 'float' object is not iterable

            This is my Python code:

            ...

            ANSWER

            Answered 2020-May-20 at 18:29

            It looks like buyPrice is a single float value, corresponding to 12.7 in the data you give us. Then, in your template, you're trying to iterate over it by doing for price in buyPrice, which throws the error.

            Depending on what you want to do, you should either extract the pricePerUnit values into an array that you can then use in the template, or modify the template to expect only a single float value.

            Source https://stackoverflow.com/questions/61920247

            QUESTION

            Latex document written in Arabic but the References List does not printed in English
            Asked 2020-May-17 at 21:01

            In Latex, I am using biber but it does not show the references in the right format, maybe due to the use of second language Arabic and its package arabtex. There are many bilingual packages that allow you to make the references in another language. However, I am newbie in bilingual packages with LaTex and references. The references

            This how it suppose to be printed as

            ...

            ANSWER

            Answered 2020-May-17 at 11:41

            The problem comes from an interaction between arabtex and the apacase macro. If you make sure that all your references are already in the correct casing, you can switch off the macro like this:

            Source https://stackoverflow.com/questions/61809373

            QUESTION

            UICollectionView doesn't update all cells properly via cellForItemAt
            Asked 2020-Mar-02 at 20:40

            I have the following setup: a UICollectionView with a custom cell, where the user can select multiple cells and then perform some heavy image operation. Now I try to update the selected cells which the user selected with the result of that operation, which will be produced by a function of the subclassed custom cell. For all visible cells, the function is called on button press by the user and for all other cells, this happens via cellForItemAt in order to be most efficient.

            However, I face the problem now, that the visible cells are all updated but then after scrolling the cells right behind or before the visible cells do not get updated via cellForItemAt but only when scrolling forth and back. Please see the attached video.

            For demonstration purposes I just show a green UIView for the image operation. Because that operation is resource heavy, I cannot use any of the UICollectionView reloadData or similar, as they would deselect the selected cells, and manual re-selection will cause flickering.

            ViewController

            ...

            ANSWER

            Answered 2020-Mar-02 at 20:40

            UICollectionView defaults to prefetchingEnabled == YES, which means that the collection view will request cells before it needs to display them. If the app's state changes such that the cells that have already been fetched need to be displayed differently, you can implement the collectionView:willDisplayCell:forItemAtIndexPath: method to update the cell.

            It looks like this is exactly your problem... you turn on a feature that should change the way the cells look, but the cells that have been fetched but which aren't visible don't get updated. Implementing collectionView:willDisplayCell:forItemAtIndexPath: should solve the problem.

            Source https://stackoverflow.com/questions/60495793

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install FLINT

            Please checkout the moja global developer docs for complete instructions on how to setup the repository. You may also refer this documentation for setting up FLINT.example, GCBM or just get an idea of the moja global workflow! You may also suggest an improvement in the current docs by creating an issue here.
            We also have a set of installation videos to help you out with the installation. If you prefer video installation procedure as opposed to textual documentation, this will be a perfect starter for you!. To learn more, you can also visit the moja global youtube channel.
            FLINT Core on Visual Studio 2019
            FLINT Example (RothC model) on Visual Studio
            FLINT Example (Chapman Richards model) on Visual Studio
            FLINT Docker on Ubuntu 20.04

            Support

            You can find FAQs on the FAQs section of our docs.If you have a question about the code, submit user feedback in the relevant repositoryIf you have a general question about a project or repository or moja global, join moja global and submit a discussion to the project, repository or moja global team submit a message to the relevant channel on moja global's Slack workspace.If you have other questions, please write to info@moja.global
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/moja-global/FLINT.git

          • CLI

            gh repo clone moja-global/FLINT

          • sshUrl

            git@github.com:moja-global/FLINT.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link