mbed-os | Arm Mbed OS is a platform operating system
kandi X-RAY | mbed-os Summary
kandi X-RAY | mbed-os Summary
Arm Mbed OS is an open source embedded operating system designed specifically for the "things" in the Internet of Things. It includes all the features you need to develop a connected product based on an Arm Cortex-M microcontroller, including security, connectivity, an RTOS and drivers for sensors and I/O devices.
Support
Quality
Security
License
Reuse
Top functions reviewed by kandi - BETA
Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of mbed-os
mbed-os Key Features
mbed-os Examples and Code Snippets
Community Discussions
Trending Discussions on mbed-os
QUESTION
I have an Android smartphone and a Discovery L475VG IoT development board. I am trying send/receive data (both directions) via BLE. I have consulted a good bit of documentation (although much of it is out of date for Mbed OS 6) and I have been trying to analyze what's going on in the GattServer characteristicUpdate and characteristicWrite example codes. See here
The two example codes work for what they're supposed to demonstrate, but they seem to go about implementing reads and writes differently, or maybe I am just not following what's going on?
If it isn't obvious, I am not super familiar with the BLE stack as a whole, and particularly not the mbed implementation of it. I previously made an Arduino-based system that accomplished the same goal I'm trying to here, but I am having trouble figuring out more complicated, lower-level library that mbed provides.
The read() and write() functions, which seem like the obvious things I would need, appear to be private functions, so I assume there is more to it than that and, naturally, mbed Studio doesn't just let me call them from main().
Can someone point me in the right direction of where to start?
...ANSWER
Answered 2022-Mar-22 at 15:15I tried to modify the BLE_GattServer_CharacteristicWrite to allow you to set the characteristic value after writing. This approach is completely untested since I don't have access to a mbed developer board.
QUESTION
I am working on a fw written in C++ with mbed-os for a STM32F4 series MCU. There is a portion of code that should be executed only at the first boot. To achieve this goal, the developer uses a memory section named mysection
for storing a flag, named MAGIC_INIT_CODE
. mysection
is defined in the ARM_GCC compiler linker file under text
memory. The content of mysection
is written by below lines at the very beginning, just after including the headers:
ANSWER
Answered 2021-Aug-08 at 19:27this line place uint64_t
object into .mysection
section and initialize it to MAGIC_INIT_CODE
. If .mysection
is placed in flash it will be permanently there. It is being programmed when you upload your program to your micro. Ihis value will be the permanently (it cannot be changed by the standard C operations. You can only change its value by erasing the flash and programming the new value)
QUESTION
I'm doing some development using Mbed Studio and after linking I see this sort of output:
...ANSWER
Answered 2021-Apr-27 at 23:13Could it be the change in size from the last link?
Yes.
QUESTION
It is Veysel My board is STM32 Nucleo F429ZI and I use Mbed-os 6.6.0. I can read from my car CANBus data but I am not able to write on the bus. I tried it with two STM32 (same boards) and my trancivers are SN65HVD230 So I know that I can read on the CANBus , but I cannot write.
I have tried , https://os.mbed.com/users/WiredHome/notebook/can---getting-started/ with one STM32 and I have tried
...ANSWER
Answered 2021-Jan-31 at 06:10for me it sounds like you forgot to drive the "RS"-pin of the CAN Transciever. This is a bit misleading in the datasheet, but it is not only "slope" control, but it also sets the Transciever to sleep. I'd recommend to use a 10k slope control resistor unlesss needed otherwise as shown here: Schematics
Community Discussions, Code Snippets contain sources that include Stack Exchange Network
Vulnerabilities
No vulnerabilities reported
Install mbed-os
We also have a contributing and publishing guide that covers licensing, contributor agreements and style guidelines.
Support
Reuse Trending Solutions
Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items
Find more librariesStay Updated
Subscribe to our newsletter for trending solutions and developer bootcamps
Share this Page