bare-metal-programming-guide | A bare metal programming guide

by cpq C Version: Current License: MIT

X-Ray Key Features Code Snippets Community Discussions(1)Vulnerabilities Install Support

kandi X-RAY | bare-metal-programming-guide Summary

bare-metal-programming-guide is a C library typically used in Internet of Things (IoT) applications. bare-metal-programming-guide has no bugs, it has no vulnerabilities, it has a Permissive License and it has medium support. You can download it from GitHub.

A microcontroller (uC, or MCU) is a small computer. Typically it has CPU, RAM, flash to store firmware code, and a bunch of pins that stick out. Some pins are used to power the MCU, usually marked as GND (ground) and VCC pins. Other pins are used to communicate with the MCU, by means of high/low voltage applied to those pins. One of the simplest ways of communication is an LED attached to a pin: one LED contact is attached to the ground pin (GND), and another contact is attached to a signal pin via a current-limiting resistor. A firmware code can set high or low voltage on a signal pin, making LED blink:.

Support

Quality

Security

License

Reuse

Support

bare-metal-programming-guide has a medium active ecosystem.

It has 1747 star(s) with 127 fork(s). There are 48 watchers for this library.

It had no major release in the last 6 months.

There are 4 open issues and 11 have been closed. On average issues are closed in 4 days. There are no pull requests.

It has a neutral sentiment in the developer community.

The latest version of bare-metal-programming-guide is current.

Quality

bare-metal-programming-guide has no bugs reported.

Security

bare-metal-programming-guide has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

License

bare-metal-programming-guide is licensed under the MIT License. This license is Permissive.

Permissive licenses have the least restrictions, and you can use them in most projects.

Reuse

bare-metal-programming-guide releases are not available. You will need to build from source code and install.

Installation instructions, examples and code snippets are available.

Top functions reviewed by kandi - BETA

kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of bare-metal-programming-guide

Get all kandi verified functions for this library.

bare-metal-programming-guide Key Features

No Key Features are available at this moment for bare-metal-programming-guide.

bare-metal-programming-guide Examples and Code Snippets

No Code Snippets are available at this moment for bare-metal-programming-guide.

Community Discussions

Trending Discussions on Internet of Things (IoT)

Display data from two json files in react native

QUESTION

Display data from two json files in react native

Asked 2020-May-17 at 23:55

I have js files Dashboard and Adverts. I managed to get Dashboard to list the information in one json file (advertisers), but when clicking on an advertiser I want it to navigate to a separate page that will display some data (Say title and text) from the second json file (productadverts). I can't get it to work. Below is the code for the Dashboard and next for Adverts. Then the json files

...

ANSWER

Answered 2020-May-17 at 23:55

The new object to get params in React Navigation 5 is:

Source https://stackoverflow.com/questions/61859411

Community Discussions, Code Snippets contain sources that include Stack Exchange Network

Vulnerabilities

No vulnerabilities reported

Install bare-metal-programming-guide

To proceed, the following tools are required:.
ARM GCC, https://launchpad.net/gcc-arm-embedded - for compiling and linking
GNU make, http://www.gnu.org/software/make/ - for build automation
ST link, https://github.com/stlink-org/stlink - for flashing
Git, https://git-scm.com/ - for downloading source code and version control
Start a terminal, and execute:.
Start a terminal, and execute:.
Download and install gcc-arm-none-eabi-10.3-2021.10-win32.exe. Enable "Add path to environment variable" during the installation
Create c:\tools folder
Download stlink-1.7.0-x86_64-w64-mingw32.zip and unpack bin/st-flash.exe into c:\tools
Download make-4.4-without-guile-w32-bin.zip and unpack bin/make.exe into c:\tools
Add c:\tools to the Path environment variable
Enable "Developer Mode" in Windows 10/11, for symbolic link support.
Install Git from https://git-scm.com/download/win. Check "Enable symlink" during installation
After boot, Nucleo-F429ZI CPU runs at 16MHz. The maximum frequency is 180MHz. Note that system clock frequency is not the only factor we need to care about. Peripherals are attached to different buses, APB1 and APB2 which are clocked differently. Their clock speeds are configured by the frequency prescaler values, set in the RCC. The main CPU clock source can also be different - we can use either an external crystal oscillator (HSE) or an internal oscillator (HSI). In our case, we'll use HSI.
Optionally, enable FPU
Set flash latency
Decide on a clock source, and PLL, APB1 and APB2 prescalers
Configure RCC by setting respective values:

Support

For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .

Find more information at: