Marlin-mUVe1DLP-Running | Tested and Working DLP Printer Firmware w/Shutter Support

Marlin-mUVe1DLP-Running is a C library typically used in Internet of Things (IoT), Arduino applications. Marlin-mUVe1DLP-Running has no bugs, it has no vulnerabilities and it has low support. You can download it from GitHub.

all implemented and working! see muve 3d’s custom printer control machine codes, mcodes, below for examples of how to take advantage of the advanced motion features of the firmware and chassis. important if you have the old endstop you will need to change the following line in the configuration.h file before uploading otherwise your z endstop won’t work correctly. original: const bool z_min_endstop_inverting = true;. change to: const bool z_min_endstop_inverting = false;. m650 d p r s t-. example: m650 d2 h0.1 p500 r3 s2 t10- peel distance 2mm, layer height .1mm/100 micron, pause .5 seconds, peel speed 2 mm/s, retract speed 3mm/s, post print tilt 10mm. m651 - initiate the peel move with the settings chosen. m653 - execute tilt, this should be placed in your end of print gcode. m654 - restore from tilt, this is