BUSE | This piece of software was branched from https

 by   opendedup C Version: Current License: GPL-2.0

kandi X-RAY | BUSE Summary

kandi X-RAY | BUSE Summary

BUSE is a C library. BUSE has no bugs, it has no vulnerabilities, it has a Strong Copyleft License and it has low support. You can download it from GitHub.

This piece of software was branched from which allows the development of Linux file systems that run in userspace. The goal of BUSE is to allow virtual block devices to run in userspace as well. Currently BUSE is used to provide block device support for SDFS. Implementing a block device with BUSE is fairly straightforward. Simply fill struct buse_operations (declared in buse.h) with function pointers that define the behavior of the block device, and set the size field to be the desired size of the device in bytes. Then call buse_main and pass it a pointer to this struct. busexmp.c is a simple example example that shows how this is done. The implementation of BUSE itself relies on NBD, the Linux network block device, which allows a remote machine to serve requests for reads and writes to a virtual block device on the local machine. BUSE sets up an NBD server and client on the same machine, with the server executing the code defined by the BUSE user. Different than acozzette's release, this version is multithreaded.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              BUSE has a low active ecosystem.
              It has 2 star(s) with 3 fork(s). There are 1 watchers for this library.
              OutlinedDot
              It had no major release in the last 6 months.
              BUSE has no issues reported. There are no pull requests.
              It has a neutral sentiment in the developer community.
              The latest version of BUSE is current.

            kandi-Quality Quality

              BUSE has no bugs reported.

            kandi-Security Security

              BUSE has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

            kandi-License License

              BUSE is licensed under the GPL-2.0 License. This license is Strong Copyleft.
              Strong Copyleft licenses enforce sharing, and you can use them when creating open source projects.

            kandi-Reuse Reuse

              BUSE releases are not available. You will need to build from source code and install.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of BUSE
            Get all kandi verified functions for this library.

            BUSE Key Features

            No Key Features are available at this moment for BUSE.

            BUSE Examples and Code Snippets

            No Code Snippets are available at this moment for BUSE.

            Community Discussions

            QUESTION

            REACT.JS how to detect only one of the cards is clicked from a component
            Asked 2022-Apr-17 at 16:47

            I tried to add click handler on my code, the idea is when i click on my first card, the first card add new class "selected" nad when i click on my third card or else the third card or else will add new class "selected". There is a problem when i was clicking on any card it was always first card was selected. Please help me. Thank you.

            Parent code

            ...

            ANSWER

            Answered 2022-Apr-17 at 16:25

            You can handle this with reactjs

            child code

            Source https://stackoverflow.com/questions/71903328

            QUESTION

            Scalable event scheduler for possibly hundreds of thousands of events
            Asked 2022-Mar-30 at 16:17

            I am trying to build a restaurant reservation application. A user can reserve a table in a restaurant ahead of time and will get a reminder 30 minutes prior. I am planning to use AWS SNS for sending the reminders. I am aware of AWS EventBridge rules, but it has a limitation of 300 rules per bus and 100 event buses per account. That makes a total of 30000 rules at any given time. A workaround can be a polling worker, which keep on querying a DB for events very 'n' seconds. Is there any event based mechanism other than AWS EventBridge which supports hundreds of thousands of events or is polling based implementation the only way forward ?

            Thanks

            ...

            ANSWER

            Answered 2022-Mar-30 at 16:17

            I ended up using polling based approach. I used a t2 small EC2 instance and 2 SQS Queues. All events scheduled are pushed to an input SQS queue. A listener ( python script ) that runs on the EC2 polls the queue every 1 minute. Once an incoming event schedule is detected, it is pushed to a local SQLite DB, where event's scheduled time is indexed. The EC2 listener also polls the DB every one minute to check for events that needs to be triggered. The event is then put into the second SQS queue and a lambda function is added to trigger on SQS.

            Source https://stackoverflow.com/questions/71574778

            QUESTION

            Visualization of multiple columns
            Asked 2022-Mar-14 at 16:56

            I have the following dataset :

            ...

            ANSWER

            Answered 2022-Mar-14 at 16:56

            QUESTION

            RSS hash for ip over gre packet
            Asked 2022-Mar-14 at 15:03

            I am using Mellanox Technologies MT27800 Family [ConnectX-5], using dpdk multi rx queue with rss "ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP"

            I receive packet with ETH:IP:GRE:ETH:IP:UDP

            I want the load balancing to be according to inner ip+port and not with the gre ip

            I tried adding ETH_RSS_LEVEL_INNERMOST to the rss_hf but i got an error about rss invalid value 0x800000003afbc should be 0xf00000000003afbc

            I am using dpdk 21.11.0 - Is it possible to do it and how? If not how can i do it.

            Is it also supported in dpdk 19.11?

            ...

            ANSWER

            Answered 2022-Mar-12 at 16:36

            Support for GRE and/or Inner RSS is touch and go for many NIC, so most NIC does not work out of box. For example

            1. For Intel Fortville (10gbps, 25Gbps, 40Gbps) NIC: one needs to update firmware and DDP profile to parse and compute inner RSS.
            2. For Intel Columbiaville (100Gbps, 50Gbps, 25Gbps) NIC: one needs to update firmware and then update driver. As I recollect default DDP profile parses GRE.
            3. In case of Mellanox MLX5 (there are multiple variant for ConnectX-5 and Connect-6), some of them support GRE based parsing and RSS, while other require ESWITCH to perform such actions.

            Hence using testpmd one needs to

            1. enable MQ_RSS in port and RX queue configuration
            2. For specific (inner RSS) enable via RTE_FLOW API

            With MT2892 Family [ConnectX-6 Dx] one can enable Inner 5 tuple RSS for GRE encapsulated packet with testpmd.

            1. Start packet generator (DPDK pktgen) use sudo ./usr/local/bin/pktgen --file-prefix=3 -a81:00.0,txq_inline_mpw=128 -l 6-27 -- -P -m "[8-11:12-27].0" -N -s"0:rtp_balanced_gre.pcap"
            2. Start testpmd in interactive mode with multiple RX queues using dpdk-testpmd --socket-mem=1024 --file-prefix=2 -l 7,8-23 -a0000:41:00.1,mprq_en=1,rxqs_min_mprq=1,mprq_log_stride_num=9,txq_inline_mpw=128,rxq_pkt_pad_en=1,rxq_cqe_comp_en=4 -- --port-numa-config=0,0 --socket-num=0 --burst=128 --txd=8192 --rxd=8192 --mbcache=512 --rxq=16 --txq=16 --nb-cores=8 -a --forward-mode=io --numa --rss-udp --enable-rx-cksum --no-mlockall --no-lsc-interrupt -a --enable-rx-cksum --enable-drop-en --eth-link-speed=100000 --no-rmv-interrupt -i
            3. In interactive shell configure the rule as flow create 0 ingress pattern eth / ipv4 / gre / eth / ipv4 / udp / end actions rss level 2 types ip udp end queues 0 1 2 3 end / end.

            Note:

            1. Ensure to use the right format in match field eth / ipv4 / gre / eth / ipv4 / udp /
            2. if the rule is not set on the device only device RX queue0 will be receiving the packets.

            Source https://stackoverflow.com/questions/71338802

            QUESTION

            Android build failed. showing "Resource compilation failed. Check logs for details."
            Asked 2022-Feb-28 at 05:46
            
                    Baseball is a bat-and-ball game played between two opposing teams, of nine players each, that take turns batting and fielding. The game proceeds when a player on the fielding team, called the pitcher, throws a ball which a player on the batting team tries to hit with a bat. The objective of the offensive team (batting team) is to hit the ball into the field of play, allowing its players to run the bases, having them advance counter-clockwise around four bases to score what are called "runs". The objective of the defensive team (fielding team) is to prevent batters from becoming runners, and to prevent runners' advance around the bases.[2] A run is scored when a runner legally advances around the bases in order and touches home plate (the place where the player started as a batter). The team that scores the most runs by the end of the game is the winner.The first objective of the batting team is to have a player reach first base safely. A player on the batting team who reaches first base without being called "out" can attempt to advance to subsequent bases as a runner, either immediately or during teammates' turns batting. The fielding team tries to prevent runs by getting batters or runners "out", which forces them out of the field of play. Both the pitcher and fielders have methods of getting the batting team's players out. The opposing teams switch back and forth between batting and fielding; the batting team's turn to bat is over once the fielding team records three outs. One turn batting for each team constitutes an inning. A game is usually composed of nine innings, and the team with the greater number of runs at the end of the game wins. If scores are tied at the end of nine innings, extra innings are usually played. Baseball has no game clock, although most games end in the ninth inning.Baseball evolved from older bat-and-ball games already being played in England by the mid-18th century. This game was brought by immigrants to North America, where the modern version developed. By the late 19th century, baseball was widely recognized as the national sport of the United States. Baseball is popular in North America and parts of Central and South America, the Caribbean, and East Asia, particularly in Japan, South Korea, and Taiwan.
                    Badminton is a racquet sport played using racquets to hit a shuttlecock across a net. Although it may be played with larger teams, the most common forms of the game are "singles" (with one player per side) and "doubles" (with two players per side). Badminton is often played as a casual outdoor activity in a yard or on a beach; formal games are played on a rectangular indoor court. Points are scored by striking the shuttlecock with the racquet and landing it within the opposing side's half of the court.Each side may only strike the shuttlecock once before it passes over the net. Play ends once the shuttlecock has struck the floor or if a fault has been called by the umpire, service judge, or (in their absence) the opposing side.[1]The shuttlecock is a feathered or (in informal matches) plastic projectile which flies differently from the balls used in many other sports. In particular, the feathers create much higher drag, causing the shuttlecock to decelerate more rapidly. Shuttlecocks also have a high top speed compared to the balls in other racquet sports. The flight of the shuttlecock gives the sport its distinctive nature.The game developed in British India from the earlier game of battledore and shuttlecock. European play came to be dominated by Denmark but the game has become very popular in Asia, with recent competitions dominated by China. Since 1992, badminton has been a Summer Olympic sport with four events: men's singles, women's singles, men's doubles, and women's doubles,[2] with mixed doubles added four years later. At high levels of play, the sport demands excellent fitness: players require aerobic stamina, agility, strength, speed, and precision. It is also a technical sport, requiring good motor coordination and the development of sophisticated racquet movements.[3
                    Basketball is a team sport in which two teams, most commonly of five players each, opposing one another on a rectangular court, compete with the primary objective of shooting a basketball (approximately 9.4 inches (24 cm) in diameter) through the defender's hoop (a basket 18 inches (46 cm) in diameter mounted 10 feet (3.048 m) high to a backboard at each end of the court), while preventing the opposing team from shooting through their own hoop. A field goal is worth two points, unless made from behind the three-point line, when it is worth three. After a foul, timed play stops and the player fouled or designated to shoot a technical foul is given one, two or three one-point free throws. The team with the most points at the end of the game wins, but if regulation play expires with the score tied, an additional period of play (overtime) is mandated.Players advance the ball by bouncing it while walking or running (dribbling) or by passing it to a teammate, both of which require considerable skill. On offense, players may use a variety of shots – the layup, the jump shot, or a dunk; on defense, they may steal the ball from a dribbler, intercept passes, or block shots; either offense or defense may collect a rebound, that is, a missed shot that bounces from rim or backboard. It is a violation to lift or drag one's pivot foot without dribbling the ball, to carry it, or to hold the ball with both hands then resume dribbling.The five players on each side fall into five playing positions. The tallest player is usually the center, the second-tallest and strongest is the power forward, a slightly shorter but more agile player is the small forward, and the shortest players or the best ball handlers are the shooting guard and the point guard, who implements the coach's game plan by managing the execution of offensive and defensive plays (player positioning). Informally, players may play three-on-three, two-on-two, and one-on-one
                    Bowling is a target sport and recreational activity in which a player rolls a ball toward pins (in pin bowling) or another target (in target bowling). The term bowling usually refers to pin bowling (most commonly ten-pin bowling), though in the United Kingdom and Commonwealth countries, bowling could also refer to target bowling, such as lawn bowls.In pin bowling, the goal is to knock over pins on a long playing surface known as a lane. Lanes have a wood or synthetic surface onto which protective lubricating oil is applied in different specified oil patterns that affect ball motion. A strike is achieved when all the pins are knocked down on the first roll, and a spare is achieved if all the pins are knocked over on a second roll. Common types of pin bowling include ten-pin, candlepin, duckpin, nine-pin, five-pin and kegel. The historical game skittles is the forerunner of modern pin bowling.In target bowling, the aim is usually to get the ball as close to a mark as possible. The surface in target bowling may be grass, gravel, or synthetic.[1] Lawn bowls, bocce, carpet bowls, pétanque, and boules may have both indoor and outdoor varieties. Curling is also related to bowls.Bowling is played by 120 million people in more than 90 countries (including 70 million in the United States alone),[2] and is the subject of video games.
                    Cycling, also called bicycling or biking, is the use of bicycles for transport, recreation, exercise or sport.[1] People engaged in cycling are referred to as "cyclists",[2] "bicyclists",[3] or "bikers".[4] Apart from two-wheeled bicycles, "cycling" also includes the riding of unicycles, tricycles, quadricycles, recumbent and similar human-powered vehicles (HPVs).Bicycles were introduced in the 19th century and now number approximately one billion worldwide.[5] They are the principal means of transportation in many parts of the world, especially in densely populated European cities.[6]Cycling is widely regarded as an effective and efficient mode of transportation[7][8] optimal for short to moderate distances.Bicycles provide numerous possible benefits in comparison with motor vehicles, including the sustained physical exercise involved in cycling, easier parking, increased maneuverability, and access to roads, bike paths and rural trails. Cycling also offers a reduced consumption of fossil fuels, less air or noise pollution, reduced greenhouse gas emissions,[9] and greatly reduced traffic congestion.[10] These have a lower financial cost for users as well as for society at large (negligible damage to roads, less road area required). By fitting bicycle racks on the front of buses, transit agencies can significantly increase the areas they can serve.[11]In addition, cycling provides a variety of health benefits.[12] The World Health Organization (WHO) states that cycling can reduce the risk of cancers, heart disease, and diabetes that are prevalent in sedentary lifestyles.[13][10] Cycling on stationary bikes have also been used as part of rehabilitation for lower limb injuries, particularly after hip surgery.[14] Individuals who cycle regularly have also reported mental health improvements, including less perceived stress and better vitality.[15]
                    Golf is a club-and-ball sport in which players use various clubs to hit balls into a series of holes on a course in as few strokes as possible.Golf, unlike most ball games, cannot and does not utilize a standardized playing area, and coping with the varied terrains encountered on different courses is a key part of the game. The game at the usual level is played on a course with an arranged progression of 18 holes, though recreational courses can be smaller, often having nine holes. Each hole on the course must contain a teeing ground to start from, and a putting green containing the actual hole or cup 4+1⁄4 inches (11 cm) in diameter. There are other standard forms of terrain in between, such as the fairway, rough (long grass), bunkers (or "sand traps"), and various hazards (water, rocks) but each hole on a course is unique in its specific layout and arrangement.Golf is played for the lowest number of strokes by an individual, known as stroke play, or the lowest score on the most individual holes in a complete round by an individual or team, known as match play. Stroke play is the most commonly seen format at all levels, but most especially at the elite level.The modern game of golf originated in 15th century Scotland. The 18-hole round was created at the Old Course at St Andrews in 1764. Golf's first major, and the world's oldest tournament in existence, is The Open Championship, also known as the British Open, which was first played in 1860 at the Prestwick Golf Club in Ayrshire, Scotland. This is one of the four major championships in men's professional golf, the other three being played in the United States: The Masters, the U.S. Open, and the PGA Championship
                    Running is a method of terrestrial locomotion allowing humans and other animals to move rapidly on foot. Running is a type of gait characterized by an aerial phase in which all feet are above the ground (though there are exceptions).[1] This is in contrast to walking, where one foot is always in contact with the ground, the legs are kept mostly straight and the center of gravity vaults over the stance leg or legs in an inverted pendulum fashion.[2] A feature of a running body from the viewpoint of spring-mass mechanics is that changes in kinetic and potential energy within a stride occur simultaneously, with energy storage accomplished by springy tendons and passive muscle elasticity.[3] The term running can refer to any of a variety of speeds ranging from jogging to sprinting.Running in humans is associated with improved health and life expectancy.[4]It is assumed that the ancestors of humankind developed the ability to run for long distances about 2.6 million years ago, probably in order to hunt animals.[5] Competitive running grew out of religious festivals in various areas. Records of competitive racing date back to the Tailteann Games in Ireland between 632 BCE and 1171 BCE,[6][7][8] while the first recorded Olympic Games took place in 776 BCE. Running has been described as the world's most accessible sport.[9]
                    "Soccer team" and "Soccer" redirect here. For the band, see Soccer Team (band). For other uses, see Soccer (disambiguation).This article is about the sport of association football. For other codes of football, see Football.Association football, more commonly known as simply football or soccer,[a] is a team sport played with a spherical ball between two teams of 11 players. It is played by approximately 250 million players in over 200 countries and dependencies, making it the world's most popular sport. The game is played on a rectangular field called a pitch with a goal at each end. The object of the game is to score more goals than the opposition by moving the ball beyond the goal line into the opposing goal, usually within a time frame of 90 or more minutes.Football is played in accordance with a set of rules known as the Laws of the Game. The ball is 68–70 cm (27–28 in) in circumference and known as the football. The two teams compete to get the ball into the other team's goal (between the posts and under the bar), thereby scoring a goal. Players are not allowed to touch the ball with hands or arms while it is in play, except for the goalkeepers within the penalty area. Players may use any other part of their body to strike or pass the ball and mainly use their feet. The team that scores more goals at the end of the game is the winner; if both teams have scored an equal number of goals, either a draw is declared or the game goes into extra time or a penalty shootout, depending on the format of the competition. Each team is led by a captain who has only one official responsibility as mandated by the Laws of the Game: to represent their team in the coin toss before kick-off or penalty kicks.[4]
                    Swimming is the self-propulsion of a person through water, or other liquid, usually for recreation, sport, exercise, or survival. Locomotion is achieved through coordinated movement of the limbs and the body to achieve hydrodynamic thrust which results in directional motion. Humans can hold their breath underwater and undertake rudimentary locomotive swimming within weeks of birth, as a survival response.[1]Swimming is consistently among the top public recreational activities,[2][3][4][5] and in some countries, swimming lessons are a compulsory part of the educational curriculum.[6] As a formalized sport, swimming features in a range of local, national, and international competitions, including every modern Summer Olympics.Swimming relies on the nearly neutral buoyancy of the human body. On average, the body has a relative density of 0.98 compared to water, which causes the body to float. However, buoyancy varies on the basis of body composition, lung inflation, muscle and fat content, centre of gravity and the salinity of the water. Higher levels of body fat and saltier water both lower the relative density of the body and increase its buoyancy. Human males tend to have a lower centre of gravity and higher muscle content, therefore find it more difficult to float or be buoyant. See also: Hydrostatic weighing.Since the human body is less dense than water, water is able to support the weight of the body during swimming. As a result, swimming is “low-impact” compared to land activities such as running. The density and viscosity of water also create resistance for objects moving through the water. Swimming strokes use this resistance to create propulsion, but this same resistance also generates drag on the body.
                    Table tennis, also known as ping-pong and whiff-whaff, is a sport in which two or four players hit a lightweight ball, also known as the ping-pong ball, back and forth across a table using small solid rackets. The game takes place on a hard table divided by a net. Except for the initial serve, the rules are generally as follows: players must allow a ball played toward them to bounce once on their side of the table and must return it so that it bounces on the opposite side at least once. A point is scored when a player fails to return the ball within the rules. Play is fast and demands quick reactions. Spinning the ball alters its trajectory and limits an opponent's options, giving the hitter a great advantage.Table tennis is governed by the worldwide organization International Table Tennis Federation (ITTF), founded in 1926. ITTF currently includes 226 member associations.[3] The table tennis official rules are specified in the ITTF handbook.[4] Table tennis has been an Olympic sport since 1988,[5] with several event categories. From 1988 until 2004, these were men's singles, women's singles, men's doubles and women's doubles. Since 2008, a team event has been played instead of the doubles.The sport originated in Victorian England, where it was played among the upper-class as an after-dinner parlour game.[1][2] It has been suggested that makeshift versions of the game were developed by British military officers in India around the 1860s or 1870s, who brought it back with them.[6] A row of books stood up along the center of the table as a net, two more books served as rackets and were used to continuously hit a golf-ball.[7][8]The name "ping-pong" was in wide use before British manufacturer J and Son Ltd trademarked it in 1901. The name "ping-pong" then came to describe the game played using the rather expensive  equipment, with other manufacturers calling it table tennis. A similar situation arose in the United States, where  sold the rights to the "ping-pong" name to Parker Brothers. Parker Brothers then enforced its trademark for the term in the 1920s, making the various associations change their names to "table tennis" instead of the more common, but trademarked, term.[9]
                    Tennis is a racket sport that can be played individually against a single opponent (singles) or between two teams of two players each (doubles). Each player uses a tennis racket that is strung with cord to strike a hollow rubber ball covered with felt over or around a net and into the opponent's court. The object of the game is to manoeuvre the ball in such a way that the opponent is not able to play a valid return. The player who is unable to return the ball validly will not gain a point, while the opposite player will.[1][2]Tennis is an Olympic sport and is played at all levels of society and at all ages. The sport can be played by anyone who can hold a racket, including wheelchair users. The modern game of tennis originated in Birmingham, England, in the late 19th century as lawn tennis.[3] It had close connections both to various field (lawn) games such as croquet and bowls as well as to the older racket sport today called real tennis.[4]The rules of modern tennis have changed little since the 1890s. Two exceptions are that until 1961 the server had to keep one foot on the ground at all times,[5][6] and the adoption of the tiebreak in the 1970s.[7] A recent addition to professional tennis has been the adoption of electronic review technology coupled with a point-challenge system, which allows a player to contest the line call of a point, a system known as Hawk-Eye.[8][9]Tennis is played by millions of recreational players and is also a popular worldwide spectator sport.[10] The four Grand Slam tournaments (also referred to as the Majors) are especially popular: the Australian Open played on hard courts, the French Open played on red clay courts, Wimbledon played on grass courts, and the US Open also played on hard courts.[11]
                
            
            ...

            ANSWER

            Answered 2022-Feb-28 at 05:46

            Cheers everyone I just found it . The solution is just remove the single quotation mark this one '

            And if you want to use this mark then use like this

            Source https://stackoverflow.com/questions/71290646

            QUESTION

            Why does my program keep dealing duplicate cards? (JAVA)
            Asked 2022-Feb-27 at 18:45

            so for a homework task I have to make a program that deals N(command line input) amount of poker decks (5 cards). I have a for-loop that checks if a card has been used, but nonetheless duplicate cards get printed. Any help would be greatly appreciated.

            Code that checks for duplicates

            ...

            ANSWER

            Answered 2022-Feb-27 at 18:45

            You are comparing Strings with == instead of .equals().

            This is the problematic line:

            Source https://stackoverflow.com/questions/71287484

            QUESTION

            Assign multiple values to one latch
            Asked 2022-Feb-24 at 18:25

            I need a latch which can take multiple bus with one enable signal for each and when this signal is high, the latch takes the value of the associated bus, something like this :

            I tried this :

            ...

            ANSWER

            Answered 2022-Feb-24 at 18:25

            I don't think you can get rid of the warnings in the first two examples—you have a bonafide race condition between the latch enable and the data feeding the latch. It is more obvious in your first example.

            When load goes to 0, temp will be changing to Z ( a don't care most likely 0) at the same time the latch enable goes to 0. Which one happens first is clearly a race.

            Source https://stackoverflow.com/questions/71256000

            QUESTION

            How to use nested IF-THEN constraints in DOCPLEX (Python)?
            Asked 2022-Feb-21 at 07:33

            I am modeling the situation I want using python cplex. While using it, a few questions arose, and these are:

            1. Can I use nested IF-THEN constraints in CPLEX?

            First, I could find below how to use the basic IF-THEN constraint.

            How to use Continuous Variables for IF-THEN constraints on DOCPLEX (Python)?

            However, I couldn't find a way to use nested IF-THEN constraints even there, so I did some thinking.

            To explain by citing the answer above, I want the following situation:

            ...

            ANSWER

            Answered 2022-Feb-21 at 07:33

            In Making optimization simple with python you relied on if then but you should try if then (v2)

            With your model I would write

            Source https://stackoverflow.com/questions/71200867

            QUESTION

            Vivado stops simulation on feedback circuit
            Asked 2022-Feb-07 at 21:10

            I'm trying to do a circuit consisting of a 2 to 1 multiplexer (8-bit buses), an 8-bit register and an 8-bit adder. These components are all tested and work as expected.

            The thing is: if I try to send the output of the Adder to one of the inputs of the multiplexer (as seen in the image by the discontinued line), the simulation will stop rather suddenly. If I don't do that and just let ain do its thing, everything will run just as it should, but I do need the output of the adder to be the one inputted to the multiplexer.

            The simulation is the following:

            The code is:

            ...

            ANSWER

            Answered 2022-Feb-07 at 21:10

            Constructing a Minimal, Complete, and Verifiable example requires filling in the missing components:

            Source https://stackoverflow.com/questions/71001390

            QUESTION

            Trying to read a JSON file with a JS script in HTML
            Asked 2022-Feb-02 at 17:26

            I am trying to use my json file, busesNotArrived.json and put its contents in a

            , however it is not working and the data in the JSON file is not displaying, here is my code:

            ...

            ANSWER

            Answered 2022-Jan-31 at 17:23

            Javascript is not the same as node.js require() is not a part of JavaScript standard and is not supported by browsers out of the box, it is the node.js module system.

            You might need to directly include the modules; some of the modules might not work in the browser sandbox context.

            Also, tools such as http://browserify.org/ might be useful.

            And please put the error message too.

            Source https://stackoverflow.com/questions/70930116

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install BUSE

            You can download it from GitHub.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/opendedup/BUSE.git

          • CLI

            gh repo clone opendedup/BUSE

          • sshUrl

            git@github.com:opendedup/BUSE.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link