SiloSim | Scale representing a single asphalt loadout lane
kandi X-RAY | SiloSim Summary
kandi X-RAY | SiloSim Summary
SiloSim is a C# library. SiloSim has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. You can download it from GitHub.
Simulates a PLC and a truck scale representing a single asphalt loadout lane with up to five silos. Specifically, it emulates an Allen Bradley Micrologix 1100 PLC loaded with Command Alkon's JWS Apex Loadout program and a Cardinal Scales weigh indicator.
Simulates a PLC and a truck scale representing a single asphalt loadout lane with up to five silos. Specifically, it emulates an Allen Bradley Micrologix 1100 PLC loaded with Command Alkon's JWS Apex Loadout program and a Cardinal Scales weigh indicator.
Support
Quality
Security
License
Reuse
Support
SiloSim has a low active ecosystem.
It has 1 star(s) with 1 fork(s). There are 2 watchers for this library.
It had no major release in the last 12 months.
SiloSim has no issues reported. There are no pull requests.
It has a neutral sentiment in the developer community.
The latest version of SiloSim is 1.2.1
Quality
SiloSim has no bugs reported.
Security
SiloSim has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
License
SiloSim is licensed under the MIT License. This license is Permissive.
Permissive licenses have the least restrictions, and you can use them in most projects.
Reuse
SiloSim releases are available to install and integrate.
Installation instructions are available. Examples and code snippets are not available.
Top functions reviewed by kandi - BETA
kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of SiloSim
Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of SiloSim
SiloSim Key Features
No Key Features are available at this moment for SiloSim.
SiloSim Examples and Code Snippets
No Code Snippets are available at this moment for SiloSim.
Community Discussions
No Community Discussions are available at this moment for SiloSim.Refer to stack overflow page for discussions.
Community Discussions, Code Snippets contain sources that include Stack Exchange Network
Vulnerabilities
No vulnerabilities reported
Install SiloSim
The latest version can be downloaded at the Github Releases page.
Before using SiloSim with JWS Apex, you must first configure the virtual Scale and PLC.
From the Apex menu, navigate to System Administrator > System Setup > Devices/Scales > Scales and open the Scales configuration application. Add a new scale for the simulated scale. Use the default settings on the General page, then go to the Interface page, and set the Scale Type to be Cardinal Model 738. Check the box for Live Interface. Set the Interface Method to Ethernet TCP/IP. Make note of the IP address of the machine where SiloSim is installed, and put the IP address into the Address field. Then for the Port, type the port that SiloSim is using for the scale. The default scale port for SiloSim is 10001, but this can be reconfigured later.
From the Apex menu, navigate to System Administrator > System Setup > Devices/Scales > Scales and open the Scales configuration application. Add a new scale with the PLC numbering scheme. PLC scales start at 10201 for the first PLC and continue with 10202, 10203, etc. Use the default settings on the General page, then go to the Interface page, and set the Scale Type to None. Set the Interface Method to Ethernet TCP/IP. Make note of the IP address of the machine where SiloSim is installed, and put the IP address into the Address field. Then for the Port, type the port that SiloSim is using for the PLC. The default PLC port for SiloSim is 11001, but this can be reconfigured later.
Creating a shortcut to SiloSim allows you to automatically load the port settings, assign a label to SiloSim, and setup the startup silos and fill rate. This is especially useful if you plan on running more than one SiloSim at a time to simulate multiple loadout lanes. First, navigate to the folder where SiloSim.exe is located. Right-click on the executable and select Send to>Desktop (create shorcut). Then go to the Desktop and right-click on the newly created shortcut and select Properties. In the properties window, in the Shortcut tab, select the text in the Target field. At the end of the Target, you can add the port number for the Scale and the port number for the PLC in addition to the label. The format is as follows:.
Before using SiloSim with JWS Apex, you must first configure the virtual Scale and PLC.
From the Apex menu, navigate to System Administrator > System Setup > Devices/Scales > Scales and open the Scales configuration application. Add a new scale for the simulated scale. Use the default settings on the General page, then go to the Interface page, and set the Scale Type to be Cardinal Model 738. Check the box for Live Interface. Set the Interface Method to Ethernet TCP/IP. Make note of the IP address of the machine where SiloSim is installed, and put the IP address into the Address field. Then for the Port, type the port that SiloSim is using for the scale. The default scale port for SiloSim is 10001, but this can be reconfigured later.
From the Apex menu, navigate to System Administrator > System Setup > Devices/Scales > Scales and open the Scales configuration application. Add a new scale with the PLC numbering scheme. PLC scales start at 10201 for the first PLC and continue with 10202, 10203, etc. Use the default settings on the General page, then go to the Interface page, and set the Scale Type to None. Set the Interface Method to Ethernet TCP/IP. Make note of the IP address of the machine where SiloSim is installed, and put the IP address into the Address field. Then for the Port, type the port that SiloSim is using for the PLC. The default PLC port for SiloSim is 11001, but this can be reconfigured later.
Creating a shortcut to SiloSim allows you to automatically load the port settings, assign a label to SiloSim, and setup the startup silos and fill rate. This is especially useful if you plan on running more than one SiloSim at a time to simulate multiple loadout lanes. First, navigate to the folder where SiloSim.exe is located. Right-click on the executable and select Send to>Desktop (create shorcut). Then go to the Desktop and right-click on the newly created shortcut and select Properties. In the properties window, in the Shortcut tab, select the text in the Target field. At the end of the Target, you can add the port number for the Scale and the port number for the PLC in addition to the label. The format is as follows:.
Support
For any new features, suggestions and bugs create an issue on GitHub.
If you have any questions check and ask questions on community page Stack Overflow .
Find more information at:
Reuse Trending Solutions
Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items
Find more librariesStay Updated
Subscribe to our newsletter for trending solutions and developer bootcamps
Share this Page
