Valley.Net.Protocols.MeterBus | meter bus , meterbus , mbus ) C # project

Valley.Net.Protocols.MeterBus is a C# library typically used in Manufacturing, Utilities, Automotive, Internet of Things (IoT), Raspberry Pi, Arduino applications. Valley.Net.Protocols.MeterBus has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. You can download it from GitHub.

M-Bus (Meter Bus) project for communicating and parsing M-Bus over udp, tcp and serial. Implementation of protocol EN 13757-2 and EN 13757-3 (M-Bus (Meter-Bus) is a European standard (EN 13757-2 physical and link layer, EN 13757-3 application layer) for the remote reading of gas, water or electricity meters. M-Bus is also usable for other types of consumption meters. The M-Bus interface is made for communication on two wires, making it cost-effective. A radio variant of M-Bus (Wireless M-Bus) is also specified in EN 13757-4. The M-Bus was developed to fill the need for a system for the networking and remote reading of utility meters, for example to measure the consumption of gas or water in the home. This bus fulfills the special requirements of remotely powered or battery-driven systems, including consumer utility meters. When interrogated, the meters deliver the data they have collected to a common master, such as a hand-held computer, connected at periodic intervals to read all utility meters of a building. An alternative method of collecting data centrally is to transmit meter readings via a modem. Other applications for the M-Bus such as alarm systems, flexible illumination installations, heating control, etc. are suitable.