netmap | Graphing package for mapping and visualizing the Internet

For example, from this output, I need the string with word 'test1.txt' and then I need the third column from this string, the file size. Something like "cut" command in Linux

I can't redirect an ip range through the vpn, it tells me that the VPN server blocks the traffic.

This is my architecture diagram

This is my settings:

• The Subnet is 152.20.20.0 MASK 255.255.255.0

• Client Windows:

  route add 22.22.22.0 MASK 255.255.255.0 10.8.0.16

• Server Windows OpenVpn (10.8.0.1):

  It's configured in client to client mode, therefore my Windows client "knows" the gateway under the VPN

• Ubuntu gateway (10.8.0.16):

  iptables -t nat -A PREROUTING -d 22.22.22.0/24 -j NETMAP --to 152.20.20.0/24

  iptables -t nat -A POSTROUTING -j MASQUERADE

But if I try to trace an IP from the Windows Client (on 22.22.22.0 range) i get:

Result of tracert from Windows client

How to configure 2 nodes via connect direct in Unix environment?

I want to configure 2 nodes/system via connect direct to initiate the file transfer. I have heard that I need to make entries in netmap and userfile config files but not sure when and what entries to make in it. Please provide some basic ideas.

I came across this question Cross Compile - tcpdump for x86

I tried both the script in the OQ, and the accepted answer but none worked they both give errors so I assume there's something done wrong.

This is my attempt at compiling it for x86:

I have a module netmap that exports a default class NetMap:

There's a local variable in netmap/LINUX/configure named BUILDDIR and its value is BUILDDIR=$PWD.It should have to be redirected to $(@D) which is netmap package build directory, /usr/local/buildroot/output/build/netmap-master in my case;otherwise, object files will be outputed to buildroot root directory.

I created a variable named NETMAP_CURRENT_BUILD and let it be /usr/local/buildroot/output/build/netmap-master,$(@D), and then I wanna replace BUILDDIR=$PWD to BUILDDIR=/usr/local/buildroot/output/build/netmap-master. By using sample code as following, it can't be done.

Sample Code :(sed part worked fine at terminal console)

I have been estimating the impact of the recently announced Intel bug on my packet processing application using netmap. So far, I have measured that I process about 50 packets per each poll() system call made, but this figure doesn't include gettimeofday() calls. I have also measured that I can read from a non-existing file descriptor (which is about the cheapest thing that a system call can do) 16.5 million times per second. My packet processing rate is 1.76 million packets per second, or in terms of system calls, 0.0352 million system calls per second. This means performance reduction would be 0.0352 / 16.5 = 0.21333% if system call penalty doubles, hardly something I should worry about.

However, my application may use gettimeofday() system calls quite often. My understanding is that these are not true system calls, but rather implemented as virtual system calls, as described in What are vdso and vsyscall?.

Now, my question is, does the fix to the recently announced Intel bug (that may affect ARM as well and that probably won't affect AMD) slow down gettimeofday() system calls? Or is gettimeofday() an entirely different animal due to being implemented as a different kind of virtual system call?

This is a question that was put on hold both in Network Engineering (because it involves a host) and in Server Fault (because... I'm not really sure). I'm hoping that it makes more sense here.

First, some context. High Frequency Traders depend on very high speed networking. In 2014 they were already working at the level of about 750 nanoseconds with 10Gb Ethernet, and competing to reach lower latencies, with single nanoseconds being important.

The surprising thing is: a 10GbE frame takes about 1 ns per byte. So, from the moment a typical NIC starts receiving a frame until it finishes and makes it available to the rest of the hardware, a minimum of 64 ns have passed for a minimal frame. For a 1500 byte frame, longer than 1 microsecond has passed. So if you wait to have a full frame before you start working on it, you are wasting precious time.

But that is exactly what every Ethernet NIC I have seen does! In fact, even kernel-bypass frameworks like DPDK or NetMap work with a granularity of frames, so they will never reach less-than-frame latency.

Consider that data in an Ethernet frame starts 14 bytes into the frame. If you started working on that data while the rest of the frame gets received, you'd save a minimum of 50 ns, and potentially 20 times that. That would be a BIG advantage when you are fighting for single ns.

I see two possibilities:

1. HFTs and the like are not counting the potential time gain of processing data before the frame is fully received. Seems absurd: they use FPGAs for speed but are allowing to waste all that waiting time?
2. They are actually using some fairly specialist hardware, even by DPDK standards

Hence my questions: how do they do it? Does anyone know of "byte-oriented" Ethernet NICs, which would make available the single bytes in the frame as they arrive? If so, how would such a NIC work: for example, would it present a stream à la stdout to the user? Probably also with its own network stack/subsystem?

Now, I have already collected some typical "that's impossible/bad/unholy" comments from the questions in NE and SF, so I will preemptively answer them here:

You want a product recommendation.

No. If anything, it'd be interesting to see some product manual if it explains the programming model or gives some insight about how they get sub-frame latency. But the goal is to learn how this is done.

Also, I know about the Hardware Recommendations SE. I'm not asking there because that's not what I want.

You are asking "why doesn't someone do this".

No. I stated that there's talk of latencies that are impossibly low for traditional NICs, and I am asking how they do it. I have advanced two possibilities I suspect: byte-oriented NIC and/or custom hardware.

It could still be something else: for example, that the way they measure those ~750 ns is actually from the moment the frame is made available by the (traditional) NIC. This would moot all my questioning. Also, this would be a surprising waste, given that they are already using FPGAs to shave nanoseconds.

You need the FCS at the end of the frame to know if the frame is valid.

The FCS is needed, but you don't need to wait for it. Look at speculative execution and branch prediction techniques, used by mainstream CPUs for decades now: work starts speculatively on a set of instructions after a branch, and if the branch is not taken, the work done is just discarded. This improves latency if the speculation was right. If not, well, the CPU would have been idle anyway.

This same speculative technique could be used on Ethernet frames: start working ASAP on the data at the beginning of the frame and only commit to that work once the frame is confirmed to be correct.

Particularly note that modern Ethernet is rather expected to not find collisions (switches everywhere) and is defined to have very low BER. Therefore, forcing all frames to have 1-frame latency just in case one frame turned out to be invalid is clearly wasteful when you care for nanoseconds.

Ethernet is frame-based, not byte-based. If you want to access bytes, use a serial protocol instead of bastardizing Ethernet.

If accessing data in a frame before it's fully received is "bastardization", then I'm sorry to break it to you, but this has been going on at least since 1989 with Cut-through switching. In fact, note that the technique I described does drop bad frames, so it is cleaner than cut-through switching, which does forward bad frames.

Getting an interrupt per byte would be horrible. If polling, you would need to use full CPUs dedicated just to RX. NUMA latency would make it impossible.

All of these points are already mooted by DPDK and the likes (NetMap?). Of course one has to configure the system carefully to make sure that you are working with the hardware, not against it. Interrupts are entirely avoided by polling. A single 3-GHz core is by far enough to RX without dropping frames at 10GbE. NUMA is a known problem, but as such you just have to deal carefully with it.

You can move to a higher speed Ethernet standard to reduce latency.

Yes, 100GbE (for example) is faster than 10GbE. But that will not help if your provider works at 10GbE and/or if your competition also moves to 100GbE. The goal is to reduce latency on a given Ethernet standard.

I was trying to send a TCP SYN packet to a server on my machine on port 8000. Then, I wanted to check if the server responded with a SYN ACK. If this was the case, then I would send back a RST packet to abort the connection. However, when I sniff the SYN packet that I send out it tells me the TCP header has a bogus length of 0, which isn't the case. The sniffer I used was tshark, by the way. Here's my code:

In the main function, I run this: