buildevents | A small helper to generate Honeycomb traces from CI builds

 by   honeycombio Go Version: v0.13.0 License: Apache-2.0

kandi X-RAY | buildevents Summary

kandi X-RAY | buildevents Summary

buildevents is a Go library. buildevents has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. You can download it from GitHub.

buildevents is a small binary used to help instrument builds in a build system such as Travis-CI, CircleCI, Jenkins, and so on. It is installed during the setup phase and then invoked as part of each step in order to visualize the build as a trace in Honeycomb. The trace that you get at the end represents the entire build. It has spans for each section and subsection of the build, representing groups of actual commands that are run. The duration of each span is how long that stage or specific command took to run, and includes whether or not the command succeeded. Here's an example showing a build that ran on CircleCI. It goes through running go tests, setting up javascript dependencies, triggers js_build and poodle_test in parallel after dependencies are configured, and then continues off below the captured portion of the waterfall.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              buildevents has a low active ecosystem.
              It has 196 star(s) with 36 fork(s). There are 30 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 3 open issues and 33 have been closed. On average issues are closed in 284 days. There are 6 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of buildevents is v0.13.0

            kandi-Quality Quality

              buildevents has 0 bugs and 2 code smells.

            kandi-Security Security

              buildevents has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              buildevents code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              buildevents is licensed under the Apache-2.0 License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              buildevents releases are available to install and integrate.
              Installation instructions, examples and code snippets are available.
              It has 722 lines of code, 18 functions and 7 files.
              It has high code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of buildevents
            Get all kandi verified functions for this library.

            buildevents Key Features

            No Key Features are available at this moment for buildevents.

            buildevents Examples and Code Snippets

            No Code Snippets are available at this moment for buildevents.

            Community Discussions

            QUESTION

            Outdated forgeGradle?
            Asked 2022-Mar-14 at 00:22

            I want to make a mod for, Minecraft 1.12.2 but seems as the old Gradle doesn't exist anymore, and just creates the stuff for versions over 1.13, any idea on how to fix it or where can I get the old version for 1.12? anytime I want to do:

            ...

            ANSWER

            Answered 2022-Mar-14 at 00:22

            So... after lots of days investigating I found a version that allows me to work propperly I downloaded here: https://github.com/DaRealTurtyWurty/Tutorial-Mod

            and their version worked fine, but after some investigation I'm dumb and I'm not supposed to compile with eclipse, I must use ./gradlew build, and that will start creating the mod.

            so... the solution was the version provided by turtywurty, and dont use eclipse, and better use visual studio code.

            Source https://stackoverflow.com/questions/71332480

            QUESTION

            How can I provide a property for versionCode/versionName in a Gradle build
            Asked 2021-Aug-17 at 12:00

            I am trying to read versionCode and versionName from a properties file (which I seem to be able to do), and use those values when declaring the Android versionCode and versionName (which does not seem to work).

            build.properties

            ...

            ANSWER

            Answered 2021-Aug-17 at 12:00

            Try reading versionName & versionCode from your file like this:

            Source https://stackoverflow.com/questions/68816040

            QUESTION

            gradle shadowJar task is not finding class org.apache.tools.zip.ZipOutputStream
            Asked 2021-Mar-10 at 12:45

            I am running into issue of building my project. It used to work fine, but when I build it now it fails on shadowJar task, with a class not found exception. No dependency got added. It used to work with Gradle 3.3, but now when I try with gradle 4.10, it keep failing with below error. Also If I remove line "mergeServiceFiles('META-INF/services')", then this exception doesn't occur.

            This is my task definition

            ...

            ANSWER

            Answered 2021-Mar-10 at 12:45

            After trying few different options, I found that I am using gradle shadow jar plugin version 1.2.3. I tried upgrading the plugin version to 2.0.4 and this problem is not occurring with this plugin version. There could be more better ways to solve this problem, but for now I am unstuck. Please post other solutions also.

            Source https://stackoverflow.com/questions/66558656

            QUESTION

            SonarQube fails on Azure Pipelines with Unable to load component class org.sonar.scanner.scan.filesystem.InputComponentStore
            Asked 2021-Feb-18 at 03:04

            After installing the marketplace plugin I'm following the official documentation for my SonarQube installation (8.6 Community)

            gradle plugin cfg:

            ...

            ANSWER

            Answered 2021-Feb-18 at 03:04

            SonarQube fails on Azure Pipelines with Unable to load component class org.sonar.scanner.scan.filesystem.InputComponentStore

            It seems this issue is that the SonarQube version is not compatible with Plugin Version Community Branch Plugin.

            You could try to use SonarQube Version: 8.1 and Plugin Version: Community Branch Plugin 1.3.0 (communityBranchPlugin).

            Note: That a separate release is required for 8.2 and above due to further changes in those releases.

            Please check the thread SonarQube 8.1 Support on the Github for some more details.

            Source https://stackoverflow.com/questions/66247070

            QUESTION

            Marklogic Data Hub Upgrade Issue
            Asked 2021-Jan-27 at 12:27

            We have been testing the upgrade process for MarkLogic Server - going from Server v9.0-8.2 to v10.0-5.2 , then the data hub going from v4.1.1 -> v4.3.2 , then to v5.2.6

            This is running on a windows 2016 server.

            Java 1.8.0_271-b09 is installed

            Gradle 5.1.1 is installed

            The ML server upgrade went fine.

            The Data Hub upgrade from 4.1.1 to 4.3.2 went fine.

            The upgrade from 4.3.2 to 5.2.6 - we have an issue, this is the commannd and the error :

            gradlew.bat hubUpdate -PmlUsername= un -PmlPassword= pw -i --debug

            ...

            ANSWER

            Answered 2021-Jan-27 at 12:27

            This is an incompatibility between the Kotlin library in Gradle and the Kotlin library in a DHF dependency. Try using the Gradle wrapper - gradlew - that is created when you initialize/upgrade a DHF project.

            Source https://stackoverflow.com/questions/65911803

            QUESTION

            Firebase crashlytics mapping file is not uploading on a Ubuntu AWS container
            Asked 2020-Dec-17 at 20:40

            I recently migrated to firebase-crashlytics-gradle from the deprecated Fabric library. It works properly on the local machine with these commands:

            ...

            ANSWER

            Answered 2020-Dec-17 at 20:40

            After several days of doing this, I discovered that the problem is related to Crashlytics and the Gradle version if you use this configuration:

            1. Docker Image for building the project: standard/ubuntu4:0 from this place

            2. Gradle version: 4.10.3 and android Gradle plugin 3.3.3

            3. Any version of Crashlytics from 17.0.0 and up

            4. Progurad must be enabled and the flag to upload the mapping file to Crashlycts must be true

            Then run the project and the project will crash.

            The solution is to upgrade the Gradle version to 5.1.1 and the project will run properly, a code example is here

            You can see through the comments, how the project evolved.

            Source https://stackoverflow.com/questions/64676130

            QUESTION

            JavaDoc, how to generate documents via gradle task for specific classes?
            Asked 2020-Sep-22 at 14:41

            I investigated this post, but it doesn't help me.

            My task is to generate javadoc only for specific classes.

            ...

            ANSWER

            Answered 2020-Sep-22 at 14:41

            Well, after some attempt I found this solution:

            Source https://stackoverflow.com/questions/63611459

            QUESTION

            Execution failed for task ':app:minifyReleaseWithR8'.java.lang.NullPointerException (no error message)
            Asked 2020-May-17 at 10:35

            when id update android studio to 3.6 android gradle tools to 3.6.0 ,there is a problem.when I generate sign apk,I got an exception,it is like this

            ...

            ANSWER

            Answered 2020-Mar-30 at 06:39

            This looks like a known issue. Please see http://issuetracker.google.com/150325706#comment25 for how to use a version of R8 where this has been fixed.

            Source https://stackoverflow.com/questions/60896733

            QUESTION

            React native gradle build fail : "node -e console.log(require('react-native/cli').bin);" : command fail
            Asked 2020-May-06 at 14:19

            I try to run my React Native app in an android emulator on a fresh Ubuntu 18.04 installation.

            In Android studio, gradle build failed with this error :

            ...

            ANSWER

            Answered 2020-May-06 at 14:19

            I found the solution. I have installed NodeJS using nvm but (I don't know why) Gradle can't execute it. So I installed node with apt-get and now everything work well.

            Source https://stackoverflow.com/questions/61306605

            QUESTION

            Unable to Build an executable JAR on Spring Boot
            Asked 2020-Apr-13 at 12:28

            I’m currently reading a tutorial page of Spring Boot (https://spring.io/guides/gs/uploading-files/#initial) in order to check how to upload an image file, but I don’t quite understand the “Build an executable JAR” part of “Run the Application” Chapter.

            I downloaded the project via the link on the tutorial’s page, and copied and pasted all the files, and I wrote “./gradlew bootRun” on the command prompt, just as written in the Build an executable JAR part of the page, but I’m unable to run the program.

            To describe my situation in a more concrete way, I moved to the directory where there is a gradle file (in my PC environment, it’s C:\Users\marra\Documents\workspace-spring-tool-suite-4-4.5.1.RELEASE\ImgUpload\gs-uploading-files\initial ) by cd command, and then wrote “./gradlew bootRun” and hit the Enter button of the keyboard, but still just get an error message “BUILD FAILED”.

            Here I come up with 2 questions.

            ・First of all, am I properly following the tutorial’s instructions in the first place? In other words, what I did is “move to the C:\Users\marra\Documents\workspace-spring-tool-suite-4-4.5.1.RELEASE\ImgUpload\gs-uploading-files\initial directory and wrote “./gradlew bootRun” and hit the Enter”, but was this the right way of running the tutorial’s program? If my way of doing it is wrong, how should I have run the program? What does “you can run the application by using ./gradlew bootRun” mean?

            ・Another possibility of this failure is that I get an error message even though I do follow the tutorial’s instructions properly. But in that case, which part did I do wrong? When I try to run the program and it fails, the command prompt shows an error message “Execution failed for task ':compileJava'. > Compilation failed; see the compiler error output for details.”. I did some research by myself, and for example on a page like https://github.com/realm/realm-java/issues/5910 suggests that “Any compilation failure gets this message.”. Perhaps I might not have copied and pasted all the sample code of the files properly, but the problem is that I don’t know which folder’s which file’s which line to check. I added “--debug” to the “./gradlew bootRun” command to see what kind of errors I get, and I got the following.

            ...

            ANSWER

            Answered 2020-Apr-13 at 12:28

            I've just follow up that tutorial and the ./gradlew bootRun build and run the app successfully. In situation like this you should check what version of java you've installed on your machine(and also which version of java, gradle is using it). As you can see in the gradle build file there is: sourceCompatibility = '1.8' . If you have a java version under 1.8 your compilation will fail probably. I had also some issues in the past with Gradle building the fat boot jar, maybe that will help also: Spring boot and Gradle multi-modules project, failed to load dependencies correctly

            Source https://stackoverflow.com/questions/61186973

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install buildevents

            Getting your build ready to use buildevents involves:.
            installing the buildevents binary in your build environment
            setting a number of environment variables for configuring the tool
            choosing a unique trace identifier
            If you have a working go environment in your build, the easiest way to install buildevents is via go get. There are also built binaries for linux and macOS hosted on Github and available under the releases tab. The following commands will download and make executable the github-hosted binary. If this doesn't work for you, please let us know - we'd love to hear what would work.
            Though listed first, running buildevents in build mode should actually be the last command that your build runs so that it can record the total running duration for the build. It does this by having the time the build started as one of the arguments passed in. The output of buildevents in build will be a link to the trace within Honeycomb. Take this URL and use it in the notifications your CI system emits to easily jump to the Honeycomb trace for a build. If the API Key used in this run is not valid, no output will be emitted. Note that CircleCI uses an alternate method of creating the root span, so the build command should not be used. Use the watch command instead. For the build step, you must first record the time the build started. The actual invocation of buildevents build should be as close to the last thing that the build does as possible.
            Travis-CI: the env section of the config file establishes some global variables in the environment. This is run before anything else, so gets a good start time.
            Travis-CI: the end of the after_failure and after_success steps

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/honeycombio/buildevents.git

          • CLI

            gh repo clone honeycombio/buildevents

          • sshUrl

            git@github.com:honeycombio/buildevents.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link