rules | Golang based Rules for Real-time Contextual Decisions | Function As A Service library

 by   project-flogo Go Version: v0.1.4 License: BSD-3-Clause

kandi X-RAY | rules Summary

kandi X-RAY | rules Summary

rules is a Go library typically used in Serverless, Function As A Service, Kafka, Prometheus applications. rules has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. You can download it from GitHub.

To get started with the Flogo Rules you'll need to have a few things.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              rules has a low active ecosystem.
              It has 85 star(s) with 26 fork(s). There are 34 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 9 open issues and 26 have been closed. On average issues are closed in 35 days. There are 2 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of rules is v0.1.4

            kandi-Quality Quality

              rules has no bugs reported.

            kandi-Security Security

              rules has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

            kandi-License License

              rules is licensed under the BSD-3-Clause License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              rules releases are available to install and integrate.
              Installation instructions, examples and code snippets are available.

            Top functions reviewed by kandi - BETA

            kandi has reviewed rules and discovered the below as its top functions. This is intended to give you an instant insight into rules implemented functionality, and help decide if they suit your requirements.
            • aJoinMoveEventAndPackage changes a move event to a rule
            • Run the engine .
            • GetOrCreateRuleSessionFromConfig returns a RuleSession from a config
            • handle an order event
            • NewTupleKeyWithKeyValues returns a new TupleKey with the given values .
            • NewTupleKey creates a new tupleKey
            • init configures ruleuator
            • findSimilarNodes finds all the common nodes in a given list
            • setupFlogoMQTTTriggers creates the mqtt trigger handler
            • itemeventAction publishes an item event
            Get all kandi verified functions for this library.

            rules Key Features

            No Key Features are available at this moment for rules.

            rules Examples and Code Snippets

            No Code Snippets are available at this moment for rules.

            Community Discussions

            QUESTION

            How to disable ESLint during build phase in React
            Asked 2021-Jun-15 at 14:34

            I'm using create-react-app and have configured my project for eslint. Below is my .eslintrc file.

            ...

            ANSWER

            Answered 2021-Jun-15 at 12:54

            You can do it by adding DISABLE_ESLINT_PLUGIN=true to the "build" in the "scripts" part in your package.json:

            Source https://stackoverflow.com/questions/67986657

            QUESTION

            Firebase Real Time Database Validate Number Increment
            Asked 2021-Jun-15 at 14:34

            I'm using Firebase Real-Time Database as backend. I want it to increase by 1 max for each request For example:

            ...

            ANSWER

            Answered 2021-Jun-15 at 14:34

            To validate that the new value is one higher than the existing value:

            Source https://stackoverflow.com/questions/67985577

            QUESTION

            How to remove eslint single quote rule in React Native default eslint config?
            Asked 2021-Jun-15 at 13:57

            I have set a react-native project with the cli. It works, but I have a very anoying eslint error:

            Strings must use singlequote.eslint(quotes)

            I have tried to write this:

            ...

            ANSWER

            Answered 2021-Jun-15 at 13:57

            You can turn off any specific rule like so:

            Source https://stackoverflow.com/questions/67987023

            QUESTION

            Merge map properties to Java POJO
            Asked 2021-Jun-15 at 13:09

            I'd like to implement UPDATE (method PUT) operation for REST api. From front-end application my controller method expects map of values, for example:

            ...

            ANSWER

            Answered 2021-Jun-15 at 13:09

            You can convert your User object to a Map and work as follow:

            • convert User to a Map original object
            • add all items to from userForm to original
            • convert the original to a User class
            • do what you need with the updated user

            Basically the code is something like that:

            Source https://stackoverflow.com/questions/67986505

            QUESTION

            kubectl cluster-info why is running on control plane and not master node
            Asked 2021-Jun-15 at 12:59

            Why kubectl cluster-info is running on control plane and not master node And on the control plane it is running on a specific IP Address https://192.168.49.2:8443 and not not localhost or 127.0.0.1 Running the following command in terminal:

            1. minikube start --driver=docker

            😄 minikube v1.20.0 on Ubuntu 16.04 ✨ Using the docker driver based on user configuration 🎉 minikube 1.21.0 is available! Download it: https://github.com/kubernetes/minikube/releases/tag/v1.21.0 💡 To disable this notice, run: 'minikube config set WantUpdateNotification false'

            👍 Starting control plane node minikube in cluster minikube 🚜 Pulling base image ... > gcr.io/k8s-minikube/kicbase...: 358.10 MiB / 358.10 MiB 100.00% 797.51 K ❗ minikube was unable to download gcr.io/k8s-minikube/kicbase:v0.0.22, but successfully downloaded kicbase/stable:v0.0.22 as a fallback image 🔥 Creating docker container (CPUs=2, Memory=2200MB) ... 🐳 Preparing Kubernetes v1.20.2 on Docker 20.10.6 ... ▪ Generating certificates and keys ... ▪ Booting up control plane ... ▪ Configuring RBAC rules ... 🔎 Verifying Kubernetes components... ▪ Using image gcr.io/k8s-minikube/storage-provisioner:v5 🌟 Enabled addons: storage-provisioner, default-storageclass 🏄 Done! kubectl is now configured to use "minikube" cluster and "default" namespace by default

            1. kubectl cluster-info

            Kubernetes control plane is running at https://192.168.49.2:8443 KubeDNS is running at https://192.168.49.2:8443/api/v1/namespaces/kube-system/services/kube-dns:dns/proxy

            To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.

            ...

            ANSWER

            Answered 2021-Jun-15 at 12:59

            The Kubernetes project is making an effort to move away from wording that can be considered offensive, with one concrete recommendation being renaming master to control-plane. In other words control-plane and master mean essentially the same thing, and the goal is to switch the terminology to use control-plane exclusively going forward. (More info in this answer)

            The kubectl command is a command line interface that executes on a client (i.e your computer) and interacts with the cluster through the control-plane. The IP address you are seing through cluster-info is the IP address through which you reach the control-plane

            Source https://stackoverflow.com/questions/67986133

            QUESTION

            Regular expression to exclude string from match
            Asked 2021-Jun-15 at 09:18

            I am writing regex pattern for nginx rewrite rules to redirect the url. Here is string pattern which I would like to match and not-match.

            Match url for below uri.

            ...

            ANSWER

            Answered 2021-Jun-15 at 09:18

            You could use this regex pattern:

            Source https://stackoverflow.com/questions/67983376

            QUESTION

            Handle Authorization Header in IIS
            Asked 2021-Jun-15 at 08:04

            I would migrate from Azure Web App Linux (PHP application , apache server ) to Azure Windows App Service (IIS) and i 'am confused about handling authorization header in IIS

            In .htaccess , i simply putting these lignes , and the Application work fine.

            ...

            ANSWER

            Answered 2021-Jun-15 at 08:04

            When use linux webapp, you need .htaccess file. But in windows, you need add web.config, becase your webapp host on IIS.

            In linux, you use below code.

            Source https://stackoverflow.com/questions/67939584

            QUESTION

            Angular and ASP.NET Core MVC: "Uncaught SyntaxError: Unexpected token '<'" for index file references when deployed
            Asked 2021-Jun-15 at 06:41

            I have an application using ASP.NET Core MVC and an Angular UI framework.

            I can run the application in IIS Express Development Environment without issue. When I switch to the IIS Express Production environment or deploy to an IIS host, my index referenced files cannot be read showing a browser error:

            Uncaught SyntaxError: Unexpected token '<'

            These pages look like they are loading the index page as opposed to the .js or .css files.

            Here is a snippet of the underlying runtime.js as it should be loaded into browser, it is not loaded with index.html.

            ...

            ANSWER

            Answered 2021-Jun-14 at 14:39

            QUESTION

            Google Appscript - how to set conditional format with multiple ranges
            Asked 2021-Jun-15 at 03:06

            I'm trying to figure out how to fix this problem. I tried to use 'for loop' to set multiple ranges with one function but got error message.

            'Exception: The parameters (String) don't match the method signature for SpreadsheetApp.ConditionalFormatRuleBuilder.setRanges.'

            Here's my code.

            ...

            ANSWER

            Answered 2021-Jun-14 at 09:02

            I believe your goal as follows.

            • You want to set the conditional format rules for each range with each formula.
            • The range is created by the for loop of for (let i = 3; i < 25; i++) {,,,}.
            • The formula is created by const formula = '=sum($' + columnStart[z] + '6:$' + columnEnd[z + 6] + '6)>=40';.
            Modification points:
            • When I saw your script, it seems that range of Logger.log(range) is the string value. But when setRanges(range) is used, range is required to be the Range object. I think that this might be the reason of your issue.
            • And, in your situation, how about the following flow?
              1. Put each range to an array of rules of rules = sheet.getConditionalFormatRules().
                • For this, in my answer, I used RangeList.
              2. Use rules with sheet.setConditionalFormatRules(rules) put outside of the loop.

            When above points are reflected to your script, it becomes as follows.

            Modified script:

            Source https://stackoverflow.com/questions/67966777

            QUESTION

            How do a sort a array of void* that points to places with names?
            Asked 2021-Jun-15 at 02:51

            Basically there are rectangles (buildings) and circles (people).

            The task I need to do is basically, when a function "fg" is called, every circle that is inside a given radius needs to run to the closest rectangle, and after all the circles inside the radius finds a rectangle, I need to report on a .txt file the names of the circles that run to each rectangle sorted alphabetically.

            Such as:

            Rectangle A: c1 c2 c3

            Rectangle B: c7 c11 c20

            ...

            And so on...

            I need to store the addresses of the circles that run, on a vector of each rectangle. I tried to use qsort from stdlib.h, but maybe the function that i use to compare is wrong

            (EDIT - full code to better understand):

            ...

            ANSWER

            Answered 2021-Jun-15 at 02:51

            The third parameter needs to be the size of the actual array elements:

            Source https://stackoverflow.com/questions/67979249

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install rules

            Getting started should be fairly easy. Lets start off with some definitions around various types used.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries

            Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Consider Popular Function As A Service Libraries

            faas

            by openfaas

            fission

            by fission

            fn

            by fnproject

            cli

            by acode

            lib

            by stdlib

            Try Top Libraries by project-flogo

            flow

            by project-flogoGo

            core

            by project-flogoGo

            flogo-web

            by project-flogoTypeScript

            stream

            by project-flogoGo

            contrib

            by project-flogoGo