Gateway | device information through the Web interface

by slsys HTML Version: Current License: No License

X-Ray Key Features Code Snippets(3)Community Discussions(10)Vulnerabilities Install Support

kandi X-RAY | Gateway Summary

Gateway is a HTML library typically used in Internet of Things (IoT), Raspberry Pi, Arduino, Xiaomi applications. Gateway has no bugs and it has low support. However Gateway has 1 vulnerabilities. You can download it from GitHub.

Management and viewing of device information through the Web interface of the gateway at (port 80). The ability to display the power source, battery level, available EndPoint devices in the web interface. Creation of local automation within the gateway SimpleBind. The ability to write scripts in Lua. The ability to create groups to manage multiple devices at the same time (in development). The ability to name the device. If you plan to use the gateway with local automation systems, it is recommended to check the box for sending addresses instead of devices. Ability to remove the device. The ability to display routes in the web-interface (in development). The ability to establish direct connections Bind between ZigBee devices without the participation of a coordinator to manage end devices. Ability to control hardware [LEDs (address or RGB)] (/faq_eng.md). The ability to control sound (in the presence of a soldered amplifier) (in development). Ability to change PanId and channel number. The ability to specify the name of the gateway on the network. The ability to switch the gateway to the AP mode when the hardware button is pressed for 2-5 seconds after power is supplied. The list of supported devices is constantly updated (information is in the converters.txt file in the archive with firmware).

Support

Quality

Security

License

Reuse

Support

Gateway has a low active ecosystem.

It has 154 star(s) with 46 fork(s). There are 19 watchers for this library.

It had no major release in the last 6 months.

There are 36 open issues and 30 have been closed. On average issues are closed in 46 days. There are no pull requests.

It has a neutral sentiment in the developer community.

The latest version of Gateway is current.

Quality

Gateway has no bugs reported.

Security

Gateway has 1 vulnerability issues reported (0 critical, 1 high, 0 medium, 0 low).

License

Gateway does not have a standard license declared.

Check the repository for any license declaration and review the terms closely.

Without a license, all rights are reserved, and you cannot use the library in your applications.

Reuse

Gateway releases are not available. You will need to build from source code and install.

Top functions reviewed by kandi - BETA

kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of Gateway

Get all kandi verified functions for this library.

Gateway Key Features

No Key Features are available at this moment for Gateway.

Gateway Examples and Code Snippets

Entry point for the Gateway application .

java

Lines of Code : 26

License : Permissive (MIT License)

Copy

public static void main(String[] args) throws UnknownHostException {
        SpringApplication app = new SpringApplication(GatewayApp.class);
        DefaultProfileUtil.addDefaultProfile(app);
        Environment env = app.run(args).getEnvironment();

Returns a list of Swagger docs for the gateway .

java

Lines of Code : 15

License : Permissive (MIT License)

Copy

@Override
    public List get() {
        List resources = new ArrayList<>();

        //Add the default swagger resource that correspond to the gateway's own swagger doc
        resources.add(swaggerResource("default", "/v2/api-docs"));

Construct API gateway proxy response event .

java

Lines of Code : 12

License : Non-SPDX

Copy

protected APIGatewayProxyResponseEvent apiGatewayProxyResponseEvent(Integer statusCode, T body) {
    var apiGatewayProxyResponseEvent = new APIGatewayProxyResponseEvent().withHeaders(headers());
    try {
      apiGatewayProxyResponseEvent

Community Discussions

Trending Discussions on Gateway

OcppV1.5 over Soap Error: Action does not exist

MoleculerJs with Jaeger tracing: how to trace follow up action calls (new spans) in one trace

Reply Channel for Messaging Gateway using Java DSL

Remove levels and set index 0 as columns names

Esp8266 WiFi STA cannot see Esp32 WiFi AP network, why?

Circuit breaker based on the condition in request

Using ansible variable inside gathered fact list

GCP - access from API Gateway to Google Cloud Run backend

Traefik: Load Balance Across Three Node Docker Swarm

Terraform - how to access the tuple and extract the invoke_arn and function_name

QUESTION

OcppV1.5 over Soap Error: Action does not exist

Asked 2021-Jun-15 at 06:41

i am currently building a Client to communicate with a Gateway of a Charge Point.
The communication is build with OcppV1.5 over Soap & Http.
The Server doesn't accept my request. I get a Http Response 500 with the Error Reason:

"XML Request is not well formed, Action does not exist."

I looked into the wsdl files but I just don't understand why it doesn't accept my action.

My Request looks something like this:

...

ANSWER

Answered 2021-Jun-13 at 09:11

It's hard to tell from what you posted why you are getting an error, so I can only add some information that can hopefully allow you to troubleshoot the issue.

Your message has WS-Addressing headers, being one of them. The value of this field should be specified in the WSDL if your WSDL also includes WS-Addressing Metadata information, or should be specified in the documentation of the web service you are invoking. Your error message "XML Request is not well formed, Action does not exist" seems to indicate that there might be an issue with this field, but there is another action that SOAP services have which is a SOAP action. I asked about it in the comment above to make sure it's eliminated as a source of problems. In SOAP 1.1 it's called SOAPAction and is a separate HTTP header, while in SOAP 1.2 it's an action parameter on the HTTP Content-Type header. Based on the http://www.w3.org/2003/05/soap-envelope namespace, you have a SOAP 1.2 message.

With these explanations layed out, I suggest you take the WSDL and feed it to SoapUI who can generate sample requests that you can use to invoke the web service. If the WSDL also contains WS-Addressing Metadata, SoapUI should be able to pick it up and help you fill in the values you need. If not, look again through the WSDL for Action elements (make sure you differentiate between the SOAP Action and the WS-Addressing Action using their XML namespaces) or through the service documentation.

Once you get a succesfull call using SoapUI, then try to duplicate it with your code. At that point you can again use SoapUI to troubleshoot things and inspect your code built message to see it resembles the one you can successfully send with SoapUI.

Hope this helps get you closer to a resolution.

Source https://stackoverflow.com/questions/67937271

QUESTION

MoleculerJs with Jaeger tracing: how to trace follow up action calls (new spans) in one trace

Asked 2021-Jun-14 at 21:33

I would like to display all my traces like in the examples from the moleculer-jaeger package:

But what i get is something like this: All spans you can see in this picture should be within the main trace (gateway).

Here is my moleculer.config:

...

ANSWER

Answered 2021-Jun-14 at 21:33

This version already has a built-in jager tracer, see the documentation.
In order for the events to be nested, it is necessary to transfer the context inside the actions, use ctx.call calls instead of broker.call, so they will be nested.
To quickly receive support for the moleculer, join us in discord!

Source https://stackoverflow.com/questions/67967551

QUESTION

Reply Channel for Messaging Gateway using Java DSL

Asked 2021-Jun-14 at 14:28

I have a REST API which receives a POST request from a client application.

...

ANSWER

Answered 2021-Jun-14 at 14:28

Your current flow does not return a value, you are simply logging the message.

A terminating .log() ends the flow.

Delete the .log() element so the result of the transform will automatically be routed back to the gateway.

Or add a .bridge() (a bridge to nowhere) after the log and it will bridge the output to the reply channel.

Source https://stackoverflow.com/questions/67960788

QUESTION

Remove levels and set index 0 as columns names

Asked 2021-Jun-14 at 08:42

How to remove first line with names level_0 and all and convert index 0 as columns.

My df ...

ANSWER

Answered 2021-Jun-14 at 08:42

I suggest first create MultiIndex in columns by header=[0,1] by convert first 2 headers rows:

Source https://stackoverflow.com/questions/67967100

QUESTION

Esp8266 WiFi STA cannot see Esp32 WiFi AP network, why?

Asked 2021-Jun-14 at 07:45

Started to develop a wiresless 'cable' solution (with websockets) between two ESPs, a wireless serial 'cable' between computer and a serial device to mimick a direct wired connection. Was working great however just accidentally fried one of the ESPs (short a serial cable connection to higher voltage - sigh) when testing. Replaced one of the ESP32s with an ESP8266. Suspect this should work however it did not.

The problem is the ESP8266 (client) cannot find the network of the ESP32 (server). Why it doesn't work? My computer can see the server and can connect. Fried ESP32 the same, no problem.

Tried the WiFiScan demo on the ESP8266 and can detect all other WiFi SSIDs/MACs in neighborhood however cannot detect the ESP32 server it's SSID/MAC.

Why it doesn't work? What is the difference and how can I solve this?

ESP32 - code of the server

...

ANSWER

Answered 2021-Jun-14 at 07:45

WiFi channels 12-14 are not used in some countries (e.g. US). Perhaps the ESP32 AP picked one of those channels, and ESP8266 is configured by default with settings from a country which doesn't allow them. Set the AP channel to some reasonably safe value in range 1-11.

I can see that the default channel should be 1, but I'd suggest experimenting with it, perhaps setting it to 6:

Source https://stackoverflow.com/questions/67963133

QUESTION

Circuit breaker based on the condition in request

Asked 2021-Jun-14 at 06:57

I need to set up the circuit break policy so that it would break the circuit only for some specific requests.

I have a sort of a gateway A calling API B which in turn calls C or D. I'm setting up a circuit breaker policy in A. Initial request arriving on A has a parameter that is later used to decide whether to call C or D, lets say http://gateway.A.com?usageParam=C. I'd like to have circuit breaker configured in such a way, that circuit could be open separately for C and D. I mean that if D is failing, calls with usageParam=D should fail immediately but usageParam=C should still go fine and vice versa.

...

ANSWER

Answered 2021-Jun-14 at 06:57

To put it simple a Circuit Breaker can have only just a single state. One of these: Closed, Open, Half-Open.

You should consider the CB as a proxy. It allows each request to go trough it if the downstream system is considered health. If CB detects transient failure (by examining the responses if any) then it will shortcut the execution by denying all requests.

So, if you want to differentiate the healthiness of C and D downstream systems then you would need two CBs (one for each). That allows you to separately allow or deny outgoing requests against different subsystems.

Option A

You can place the two CBs inside service A. Here you can register two named HttpClients which are decorated with different Circuit Breakers:

Source https://stackoverflow.com/questions/67939913

QUESTION

Using ansible variable inside gathered fact list

Asked 2021-Jun-13 at 20:44

I'm stuck to get data from gathered fact, using calculated data as part of query.

I am using 2.9 ansible and here is my task

...

ANSWER

Answered 2021-Jun-13 at 20:44

Remove the dot if you use the indirect addressing

Source https://stackoverflow.com/questions/67962363

QUESTION

GCP - access from API Gateway to Google Cloud Run backend

Asked 2021-Jun-13 at 12:12

In my GCP project, I have a python API running in a docker container (using connexion). I want to expose the API (with an API key) using API Gateway.

When I deploy the docker container with --ingress internal, I get Access is forbidden. on API calls over the Gateway. So the API gateway cannot access the Google Run container. When I use --ingress all, all works as expected, but then my internal API is accessible from the web, which is not what I want.

I created a service account for this:

...

ANSWER

Answered 2021-Jun-13 at 12:12

Ingress internal means "Accept only the requests coming from the project's VPC or VPC SC perimeter".

When you use API Gateway, you aren't in your VPC, it's serverless, it's in Google Cloud managed VPC. Therefore, your query are forbidden.

And because API Gateway can't be plugged to a VPC Connector (for now) and thus can't route the request to your VPC, you can't use this ingress=internal mode.

Thus, the solution is to set an ingress to all, which is not a concern is you authorize only the legit accounts to access it.

For that, check in Cloud Run service is there is allUsers granted with the roles/run.invoker in your project.

If yes, remove it

Then, create a service account and grant it the roles/run.invoker on the Cloud Run service.

Follow this documentation

Step 4: update the x-google-backend in your OpenAPI spec file to add the correct authentication audience when you call your Cloud Run (it's the base service URL)
Step 5: create a gateway with a backend service account; set the service account that you created previously

At the end, only the account authenticated and authorized will be able to reach your Cloud Run service

All the unauthorized access are filtered by Google Front End and discarded before reaching your service. Therefore, your service isn't invoked for nothing and therefore your pay nothing!

Only API Gateway (and the potential other accounts that you let on the Cloud Run service) can invoke to the Cloud Run service.

So, OK, your URL is public, reachable from the wild internet, but protected with Google Front End and IAM.

Source https://stackoverflow.com/questions/67951166

QUESTION

Traefik: Load Balance Across Three Node Docker Swarm

Asked 2021-Jun-13 at 03:53

I am working on setting up a three node Docker swarm for a web application I support. Initially, we have Traefik setup as a reverse proxy. Traefik and the web app both run on the same web server and the web server is in a single node docker swarm. We are trying to add two additional nodes for application stability.

At the moment, I'm simply trying to understand Traefik load balancing along with Docker Swarm. I am deploying a Traefik v1.7 stack and including the whoami application. The docker-compose file for this first past looks like:

...

ANSWER

Answered 2021-Jun-13 at 03:53

Apparently Traefik can't drain the connections during update (maybe it doesn't have access to healthchecks and swarm info?).

To achieve a zero-downtime rolling update you should delegate the load-balancing to docker swarm itself:

Source https://stackoverflow.com/questions/66536125

QUESTION

Terraform - how to access the tuple and extract the invoke_arn and function_name

Asked 2021-Jun-12 at 22:21

I have written terraform code which:

Creates IAM Role
Creates lambda functions and attaches the above created role
Dynamo DB table creation
Creates API gateway, resources and adds POST method with lambda integration.

The first 3 steps works well. However while creating and configuring the API gateway, I am encountering below error in resource aws_api_gateway_integration & aws_lambda_permission, where I am trying to attach the lambda function "save_course" to the POST method under "courses" resource

...

ANSWER

Answered 2021-Jun-12 at 22:21

Change your locals from

Source https://stackoverflow.com/questions/67953162

Community Discussions, Code Snippets contain sources that include Stack Exchange Network

Vulnerabilities

No vulnerabilities reported

Install Gateway

You can download it from GitHub.

Support

For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .

Find more information at: