regulators | Two JavaFX controls that might be handy e

 by   HanSolo Java Version: 17.0.0 License: Apache-2.0

kandi X-RAY | regulators Summary

kandi X-RAY | regulators Summary

regulators is a Java library typically used in User Interface, Raspberry Pi, JavaFX applications. regulators has no bugs, it has no vulnerabilities, it has build file available, it has a Permissive License and it has low support. You can download it from GitHub, Maven.

Two JavaFX controls that might be handy e.g. for home automation UI's

            kandi-support Support

              regulators has a low active ecosystem.
              It has 25 star(s) with 7 fork(s). There are 3 watchers for this library.
              It had no major release in the last 12 months.
              There are 0 open issues and 1 have been closed. There are no pull requests.
              It has a neutral sentiment in the developer community.
              The latest version of regulators is 17.0.0

            kandi-Quality Quality

              regulators has no bugs reported.

            kandi-Security Security

              regulators has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

            kandi-License License

              regulators is licensed under the Apache-2.0 License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              regulators releases are available to install and integrate.
              Deployable package is available in Maven.
              Build file is available. You can build the component from source.

            Top functions reviewed by kandi - BETA

            kandi has reviewed regulators and discovered the below as its top functions. This is intended to give you an instant insight into regulators implemented functionality, and help decide if they suit your requirements.
            • Initialize the drop shadow
            • Get an image with the given width and height
            • Returns a list of stops
            • Create an image pattern for the given bounds
            • Resize the area
            • Redraw the pane
            • Rotate indicator
            • Builds the FeedbackRegulator
            • Redraw the redraw
            • Resize the panel
            • Touch a point in the panel
            • Recalculates the image with the given angle
            • Initialize the minimum size
            • Creates an image pattern
            • Starts the scene
            • Gets the color value from the given color
            • Initializes the builder
            • Touch a point
            • Register listeners
            • Registers listeners
            • Get a rounded image of the round image
            • Builds a Regulator
            • Builds the control registry
            • Initialize the shadow
            • Initialize the graphics
            • Sets the path to the symbol
            Get all kandi verified functions for this library.

            regulators Key Features

            No Key Features are available at this moment for regulators.

            regulators Examples and Code Snippets

            No Code Snippets are available at this moment for regulators.

            Community Discussions


            LINQ to SQL filter child collection
            Asked 2021-Jun-05 at 21:53

            I'm strugling with this query, i think I'm missing something. I have two autogenerated dbml models.



            Answered 2021-Jun-04 at 21:54

            In LINQ-to-SQL it's a bit messy and not intuitive to do this. You have to use DataLoadOptions:



            I need to change animation an onClick
            Asked 2021-Mar-28 at 07:27

            I created an onClick function to change my data and image what my task to and animation on it like when onClick execute animation also added I need to set like fadeUp mean mean data is changing its go up and fade with animation you can SEE my code sandbox link this is my Reactjs app.



            Answered 2021-Mar-28 at 06:02

            Here is what you can do. Put a conditional className with ${count === 2 ? "start-aniamtion-class" : ""} .When count becomes 2, animation in the defined class starts. So you create @keyframe animation of fadeup in that class.



            Embedded Buildroot and Yocto Linux crash 50% of the time
            Asked 2020-Nov-04 at 18:22

            I am getting the below error 50% of the time during startup on an STM32 based processor (OSD32MP15x).

            I've tried over 40 versions configs and setups none work and I am under high pressure to deliver this piece of hardware to a client. To me this looks like some kind of timing issue because it doesn't always happen.

            I've tried to disable USB related configs, change DTS files and strip out everything that is not needed and last but not least change power config in the linux config and DTS.

            Questions: How can I debug the below? What does this error look like to you?



            Answered 2020-Nov-04 at 18:22

            It looks like the problem was introduced by the patch: regulator: stpmic1: Usb boost over-current protection workaround.

            • The "boost" interrupt handler stpmic1_boost_irq_handler calls regulator_lock(usb_data->boost_rdev);
            • The "boost" interrupt handler (stpmic1_boost_irq_handler) is set up by the stpmic1_boost_register function, but usb_data->boost_rdev is still null at this time.
            • usb_data->boost_rdev is set to the return value of the stpmic1_boost_register function by thestpmic1_regulator_probe function.
            • If the "boost" interrupt handler stpmic1_boost_irq_handler gets called before usb_data->boost_rdev has been set by the stpmic1_regulator_probe function, then the crash occurs.

            A workaround would be to set usb_data->boost_rdev = rdev; in the stpmic1_boost_register function after it has set rdev but before it sets up the interrupt handler.

            This should be reported to the author of the patch. See the "Signed-off-by:" line in the patch for the email address.



            Changing Linux kernel module boot order
            Asked 2020-May-26 at 10:13

            I am experimenting with boot optimization on my Raspberry Pi 4 - Yocto based embedded Linux system and would like to set when vc4-drm kernel module is loaded.

            I would like to make vc4-drm kernel module loaded earlier so that /dev/fb0 is ready earlier. Now, it exceeds my user space boot time, therefore I am not able to display anything on it for about 9 seconds. However, if I move it so that it is initialized earlier, I'm thinking it will be better.

            Below is an image that shows major kernel modules that are loaded on my system, in a complete debug mode (bootchart+initcall_debug+serial+printk enabled). You will see that vc4_drm_register is almost at the end.

            In order to approach the issue, I found these: What is the Linux built-in driver load order? and How does Linux determine the order of module init calls?. Yasushi Shoji states;

            put your init function in the higher level, or put your device driver at the higher position in Makefile

            For the first method, in the kernel that I'm compiling, I found the module in drivers/gpu/drm/vc4, then replaced module_init(vc4_drm_register) with both early_initcall(vc4_drm_register) and subsys_initcall(vc4_drm_register). Both attempts made absolutely no difference, vc4 still loads at around ~9th second. Either I'm missing something here, or this is being handled differently.

            Second method suggested is to adjust the order in drivers/Makefile. However, to me gpu/ drivers seems already pretty early stage.



            Answered 2020-May-26 at 10:13

            I was able to solve the problem. It turns out that order to make *_initcall()'s work, the module should be statically linked, therefore, I set;



            Kotlin using Gson to deserialize local json file
            Asked 2020-May-26 at 07:55

            I want to deserialize a local json file using Gson to create a recyclerview. However I get an IllegalStateException on below line.



            Answered 2020-May-26 at 07:55

            It because you need to first get News JSONArray from your response and then that JSONArray you need to pass in GSON to that will convert your JSONArray to List of Your HomeFeed model.



            How to get resolved sha digest for all images within Kubernetes yaml?
            Asked 2020-May-12 at 13:09

            Docker image tags are mutable, in that image:latest and image:1.0 can both point to image@sha256:....., but when version 1.1 is released, image:latest stored within a registry can be pointed to an image with a different sha digest. Pulling an image with a particular tag now does not mean that an identical image will be pulled next time.

            If a Kubernetes YAMl resource definition refers to an image by tag (not by digest), is there a means of determining what sha digest each image will actually resolve to, before the resource definition is deployed? Is this functionality supported using kustomize or kubectl?

            Use case is wanting to determine what has actually been deployed in one environment before deploying to another (I'd like to take a hash of the resolved resource definition and could then use this to understand whether image:1.0 to be deployed to PROD refers to the same image:1.0 that was deployed to UAT).

            Are there any tools that can be used to support this functionality?

            For example, given the following YAML, is there a way of replacing all images with their resolved digests?



            Answered 2019-Sep-20 at 13:02

            is there a means of determining what sha digest each image will actually resolve to, before the resource definition is deployed?

            No, and in the case you describe, it can vary by node. The Deployment will create some number of Pods, each Pod will get scheduled on some Node, and the Kubelet there will only pull the image if it doesn’t have something with that tag already. If you have two replicas, and you’ve changed the image a tag points to, then on node A it could use the older image that was already there, but on node B where there isn’t an image, it will pull and get the newer version.

            The best practice here is to avoid changing the image a tag points to. Give each build coming out of your CI system a unique tag (a datestamp or source control commit ID for example) and use that in your Kubernetes object specifications. That avoids this problem entirely.

            A workaround is to set



            How to stop setInterval with loop process
            Asked 2019-Sep-06 at 06:40

            I'm writing a code that will popup a text wrapped in array and display each text with forEach function. Here's the sample code.



            Answered 2019-Sep-06 at 06:40

            You could pass popups variable in jQuery as a parameter and access it in for individual click events:



            How to generate rows to insert in between existing rows
            Asked 2019-Jul-17 at 13:06

            At our company clients are assessed at a regular basis at which they are graded. The result of the assessment gets stored in the database (SQL Server 2017) and the result would look like this.



            Answered 2019-Jul-17 at 12:34

            Something along these lines would work (I've used test data and parameterized with a start and end month):



            Close all open drop downs and consolidate code if possible
            Asked 2019-May-15 at 08:33

            What I need to be able to do is to have the text drop downs close when another is selected so that I do not end up with a bunch of drop downs open on the page at the same time.

            I have two text dropdowns that will be used one after the other alternating on a page. In other words accordion1, accordion2, accordion1, accordion2 and so on the reason I have accordion1 and accordion2 is that with my limited experience it is the only way I could figure out change the button color so the list could alternate colors. It would be nice to consolidate the code, but I can live with the extra code if need be.

            Here is the code for accordion1



            Answered 2019-May-15 at 08:33

            Question 1 — "How do I not end up with a bunch of drop downs open on the page at the same time":

            You close all dropdowns before opening another one. You can also create css rules to display or hide the dropdown. This way, it will be easier to find the currently active dropdown. See code below.

            Question 2 — "How can I make the list alternate colors"

            You can add more than one class to an element. Simply create color classes and add them to the right elements. See code below.


            Edit (scrollIntoView)

            I added code to automatically scroll the window so that the active tab is visible. It works only on Chrome, Firefox and Opera. Use this polyfill iamdustan/smoothscroll to use it in other browsers. See compatibility here and all functions here.



            Applying Bostock's wrap function on text
            Asked 2019-Apr-29 at 13:25

            I have a use case where I would like to append a small/medium blurb of text to different parts of my visual. As is the default behavior, this looks very unsightly as svg text is just appended in one fell swoop. So after a bit of research I found that Mike Bostock has created a clever way to handle longer strings in svg text, which can be seen here. I have tried to adapt this function to my particular visual but it didn't quite pan out. Here is the snippet:



            Answered 2019-Apr-29 at 13:25

            Your main problem here is that you're setting the class before the enter method:


            Community Discussions, Code Snippets contain sources that include Stack Exchange Network


            No vulnerabilities reported

            Install regulators

            You can download it from GitHub, Maven.
            You can use regulators like any standard Java library. Please include the the jar files in your classpath. You can also use any IDE and you can run and debug the regulators component as you would do with any other Java program. Best practice is to use a build tool that supports dependency management such as Maven or Gradle. For Maven installation, please refer For Gradle installation, please refer .


            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
          • HTTPS


          • CLI

            gh repo clone HanSolo/regulators

          • sshUrl


          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Explore Related Topics

            Consider Popular Java Libraries


            by CyC2018


            by Snailclimb


            by MisterBooo


            by spring-projects

            Try Top Libraries by HanSolo


            by HanSoloJava


            by HanSoloJava


            by HanSoloJava


            by HanSoloJava


            by HanSoloJava