NASController | Android interface for STB such as FireTV to control | Network Attached Storage library

 by   arron-h Java Version: Current License: No License

kandi X-RAY | NASController Summary

kandi X-RAY | NASController Summary

NASController is a Java library typically used in Storage, Network Attached Storage applications. NASController has no bugs, it has no vulnerabilities, it has build file available and it has low support. You can download it from GitHub.

An Android interface for a STB such as FireTV to control a PC-based NAS for efficiency.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              NASController has a low active ecosystem.
              It has 1 star(s) with 1 fork(s). There are 2 watchers for this library.
              OutlinedDot
              It had no major release in the last 6 months.
              NASController has no issues reported. There are no pull requests.
              It has a neutral sentiment in the developer community.
              The latest version of NASController is current.

            kandi-Quality Quality

              NASController has no bugs reported.

            kandi-Security Security

              NASController has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

            kandi-License License

              NASController does not have a standard license declared.
              Check the repository for any license declaration and review the terms closely.
              OutlinedDot
              Without a license, all rights are reserved, and you cannot use the library in your applications.

            kandi-Reuse Reuse

              NASController releases are not available. You will need to build from source code and install.
              Build file is available. You can build the component from source.

            Top functions reviewed by kandi - BETA

            kandi has reviewed NASController and discovered the below as its top functions. This is intended to give you an instant insight into NASController implemented functionality, and help decide if they suit your requirements.
            • Wake up a thread
            • Returns the IP address for the given interface
            • Wake up the network
            • Converts the MAC address to a byte array
            • Reset the UI
            • Toggles the visibility of a view
            • Helper function to toggle the visibility of public key fields
            • Toggles the visibility of the password fields
            • Start the WakeOnLan job
            • Returns the default datagram factory
            • Shows a toast dialog with the given message
            • Dialog with an error message
            • Resume the monitor
            • Handles reachable status
            • Start the monitor job
            • Called when an item is selected
            • Select the IP address
            • Initializes the NetworkInterface
            • Builds the spinner list
            • Initialize the activity
            • Invoked when the application is shutting down
            • Saves the settings
            • Executes the remote ssh session
            Get all kandi verified functions for this library.

            NASController Key Features

            No Key Features are available at this moment for NASController.

            NASController Examples and Code Snippets

            No Code Snippets are available at this moment for NASController.

            Community Discussions

            QUESTION

            How can I read/write data from/to network attached storage with kedro?
            Asked 2020-May-14 at 09:24

            In the API docs about kedro.io and kedro.contrib.io I could not find info about how to read/write data from/to network attached storage such as e.g. FritzBox NAS.

            ...

            ANSWER

            Answered 2020-May-14 at 09:24

            So I'm a little rusty on network attached storage, but:

            1. If you can mount your network attached storage onto your OS and access it like a regular folder, then it's just a matter of providing the right filepath when writing the config for a given catalog entry. See for example: Using Python, how can I access a shared folder on windows network?

            2. Otherwise, if accessing the network attached storage requires anything special, you might want to create a custom dataset that uses a Python library for interfacing with your network attached storage. Something like pysmb comes to mind.

            The custom dataset could borrow heavily from the logic in existing kedro.io or kedro.extras.datasets datasets, but you replace the filepath/fsspec handling code with pysmb instead.

            Source https://stackoverflow.com/questions/61791713

            QUESTION

            About NAS and SAN(protocols, architecture, etc..)
            Asked 2020-Apr-07 at 09:44

            I am currently kind of having trouble to understand between NAS and SAN.

            As far as I figured out, NAS and SAN are kind of defined as below.

            NAS(Network attached storage)
            - Usually used as file storage and use Ethernet Infrastructure to communicate
            - As file storage, support protocols like NFS, CIFS, SMB, HTTP(S)

            SAN(Storage Area Network)
            - Network Protocol to communicate with block storage for data access.
            - Configured with separated network system
            - Commonly based on Fibre Channel(FC) technology.
            - Could use iSCSI(in small and medium sized business) or FCoE for less expensive alternative to FC

            So, below is my questions.
            1. Is File Storage and Block Storage are the solutions? I researched and found that NAS is File Storage Solution and SAN Storage is Block Storage Solution.
            - In that case, are their base infrastructure(storage device) same? Only different with protocols, network devices, may be storage os something that controls underline device and way of usage?

            2. I found there are NAS Solutions that support iSCSI. But I found that iSCSI is SCSI Protocol that use TCP/IP Network system and SCSI is for block level storage communication protocols.
            - And Now I am confused. NAS is a file storage solution and how could that support iSCSI Protocol?

            3. Are AWS root disk and EBS storage SAN Storage?
            - I read that SAN Storage configuration could be expensive so iSCSI or FCoE are less expensive way to configure.
            - With what technology AWS storage Infrastructure is configured??

            I am kind of newly studying of these storage part computer science and got some questions.
            Is there anyone can explain those questions clearly?
            Thank you.

            ...

            ANSWER

            Answered 2020-Apr-07 at 09:44

            It depends on what you call a "Solution". The basic infrastructure is the same it's a some kind of a "storage server" (storage system) with physical disk(s), but it very much dependent of technologies, vendors and various options. Typically, a storage system provides access to its physical disks with different protocols of 2 main groups: block-level protocols like SCSI or rarely ATA on one hand, or file-level protocols like NFS, CIFS, etc on the other. It doesn't mean, a storage system can't work in both, block and file modes.

            Storage network - SAN can be build over FC, FCoE, converged infrastructure, pure TCP/IP for iSCSI, Infiniband or any other infrastructure. Typically, when people say "SAN" they mean Block storage devices and FC protocol, but it doesn't mean, that a file storage - NAS can't be connected with SAN and vice verse.

            Source https://stackoverflow.com/questions/60768967

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install NASController

            You can download it from GitHub.
            You can use NASController like any standard Java library. Please include the the jar files in your classpath. You can also use any IDE and you can run and debug the NASController component as you would do with any other Java program. Best practice is to use a build tool that supports dependency management such as Maven or Gradle. For Maven installation, please refer maven.apache.org. For Gradle installation, please refer gradle.org .

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/arron-h/NASController.git

          • CLI

            gh repo clone arron-h/NASController

          • sshUrl

            git@github.com:arron-h/NASController.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Explore Related Topics

            Consider Popular Network Attached Storage Libraries

            Try Top Libraries by arron-h

            protour-stat-trawler

            by arron-hJavaScript

            enlighten

            by arron-hJavaScript

            psg-stl

            by arron-hPython

            VAP3D

            by arron-hC#