virtualbox | VirtualBox package for Synology DSM | Network Attached Storage library

 by   seba76 Python Version: v5.2.16-123759 License: No License

kandi X-RAY | virtualbox Summary

kandi X-RAY | virtualbox Summary

virtualbox is a Python library typically used in Storage, Network Attached Storage, Docker, Ubuntu, Debian applications. virtualbox has no bugs, it has no vulnerabilities and it has low support. However virtualbox build file is not available. You can download it from GitHub.

This is build for VirtualBox service running on Synology NAS boxes running appropriate Intel CPU. You should be able to build package on your NAS using this repo or you can use Linux box like debian or ubuntu. Keep in mind installing this package can make your NAS unreachable since it is still in alpha phase.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              virtualbox has a low active ecosystem.
              It has 7 star(s) with 1 fork(s). There are 1 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              virtualbox has no issues reported. There are no pull requests.
              It has a neutral sentiment in the developer community.
              The latest version of virtualbox is v5.2.16-123759

            kandi-Quality Quality

              virtualbox has 0 bugs and 0 code smells.

            kandi-Security Security

              virtualbox has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              virtualbox code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              virtualbox does not have a standard license declared.
              Check the repository for any license declaration and review the terms closely.
              OutlinedDot
              Without a license, all rights are reserved, and you cannot use the library in your applications.

            kandi-Reuse Reuse

              virtualbox releases are available to install and integrate.
              virtualbox has no build file. You will be need to create the build yourself to build the component from source.
              Installation instructions, examples and code snippets are available.
              It has 9884 lines of code, 874 functions and 45 files.
              It has medium code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi has reviewed virtualbox and discovered the below as its top functions. This is intended to give you an instant insight into virtualbox implemented functionality, and help decide if they suit your requirements.
            • Process a document
            • Write attribute
            • Write comments
            • Process an element
            • Returns a string representation of the message
            • Generate a new boundary
            • Make a boundary
            • Define a dict of standard stdlib modules
            • Monkey patch xmlrpc client
            • Import a standard Python module
            • Decode gzip encoded data
            • Read n bytes from file
            • Convert a string to XML
            • Convert a hex value to Unicode
            • Get the default parser
            • Create a default parser
            • Create an etree from a string
            • Check the docinfo
            • Return a SOAPConfig object
            • Generate a list of function definitions
            • Parse XML name
            • Return an instance of Python 3 class
            • Install Expatcher
            Get all kandi verified functions for this library.

            virtualbox Key Features

            No Key Features are available at this moment for virtualbox.

            virtualbox Examples and Code Snippets

            No Code Snippets are available at this moment for virtualbox.

            Community Discussions

            QUESTION

            CentOS through a VM - no URLs in mirrorlist
            Asked 2022-Mar-26 at 21:04

            I am trying to run a CentOS 8 server through VirtualBox (6.1.30) (Vagrant), which worked just fine yesterday for me, but today I tried running a sudo yum update. I keep getting this error for some reason:

            ...

            ANSWER

            Answered 2022-Mar-26 at 20:59

            Check out this article: CentOS Linux EOL

            The below commands helped me:

            Source https://stackoverflow.com/questions/70926799

            QUESTION

            Laravel Homestead - page stopped working ERR_ADDRESS_UNREACHABLE
            Asked 2022-Mar-25 at 09:10

            Took my laptop out of house for a couple of days, didn't even get to turn it on during that time. Came back, ready to keep fiddling with my project but the page stopped working all of a sudden. I started getting ERR_ADDRESS_UNREACHABLE in the browser.

            I've uninstalled homestead box, vagrant, virtualbox, with restart after each, re installed everything, same issue.

            I can not ping the 192.168.10.10 address but I can SSH into the box no problem.

            Running MacOS Big Sur, VirtualBox 6.1, Vagrant 2.2.18 and whatever the latest homestead version is. Really about quit programming altogether, this is super frustrating. I'd really appreciate any help. Thank you

            Homestead.yaml

            ...

            ANSWER

            Answered 2021-Oct-29 at 20:41

            I think this is the fix, but I couldn't get it running until now:

            Anything in the 192.68.56.0/21 range will work out-of-the-box without any custom configuration per VirtualBox's documentation.

            https://github.com/laravel/homestead/issues/1717

            Found some more related information here:

            https://discuss.hashicorp.com/t/vagrant-2-2-18-osx-11-6-cannot-create-private-network/30984/16

            update 29.10.2021:
            I downgraded virtualbox to 6.1.26 and it's working again.

            Source https://stackoverflow.com/questions/69731953

            QUESTION

            Kafka Connect error: com.aerospike.connect.inbound.aerospike.exception.ConvertToAerospikeException: user key missing from record
            Asked 2022-Jan-19 at 03:20

            I am trying to ingest data from kafka into aerospike. What am I missing in the kafka message being sent?

            I am sending below data into kafka for pushing into aerospike:

            ...

            ANSWER

            Answered 2022-Jan-19 at 03:20

            It looks like you are not specifying a key when you are sending your kafka message. By default Kafka sends a null key and your config says to use the kafka key as the aerospike key. In order to send a kafka key you need to set parse.key to true and specify what your separator will be (in the kafka producer).

            see step 8 here

            https://kafka-tutorials.confluent.io/kafka-console-consumer-producer-basics/kafka.html

            Source https://stackoverflow.com/questions/70337749

            QUESTION

            vvv.test not loading (nor any of my sites) when running vagrant up
            Asked 2022-Jan-07 at 21:03

            Ever since I've upgraded my Mac to Monteray, I've been having issues with Vagrant.

            Initially, I use to see a vBoxManage error on terminal when running vagrant up. I posted a question on this on SO previously, see here for details.

            Today, I uninstalled VirtualBox again (removed VirtualBox VMs folder and moved application to trash) and reinstalled VirtualBox 6.1.3 for OS X hosts` (link here).

            I then ran vagrant up on terminal and it successfully compiled:

            After seeing the famous green teddy, I tried going to vvv.test but, the page doesn't load. I've tried accessing URLs of sites that have been provisioned before, but they too do not load.

            I've also ran vagrant up --debug, and nothing concerning was seen.

            My Vagrant version is 2.2.19

            Unsure what steps to take next?

            Edit:

            Steps taken:

            1. Have ran vagrant up --provision to provision sites in config.yml file (config.yml file can be seen below)
            2. Have tried to access website-dev.test, page doesn't load
            3. Have tried to access vvv.test, page doesn't load
            4. Have ran vagrant reload --provision and repeated steps 2 and 3, but same results
            5. Have ran vagrant halt and vagrant up and repeated steps 2 and 3, but same results

            I don't believe there's an issue in my config.yml file, as before Monteray update, everything was working fine (and I've made no changes to my yml file since). But, to cover all scenario's, here is my config.yml file:

            ...

            ANSWER

            Answered 2021-Dec-15 at 18:33

            Thanks to guidance from @Tinxuanna, I've managed to solve the issue (finally!).

            For anyone else having similar issues, here's what I did:

            1. Access the /etc/hosts folder
            2. Find file called hosts and open it in a text editor.
            3. Remove the IP addresses related to vagrant (I kept a backup of the original file just in case)
            4. After saving hosts file the IP addresses removed, I ran vagrant up --provision
            5. I then ran vagrant up
            6. Then accessed vvv.test
            7. You're done!

            Source https://stackoverflow.com/questions/70192942

            QUESTION

            VirtualBox 6.1.28 fails to load R0 module (`VERR_LDR_GENERAL_FAILURE`) on Windows
            Asked 2022-Jan-03 at 22:47

            VirtualBox 6.1.28 fails to start a box on Windows with the following error:

            ...

            ANSWER

            Answered 2021-Nov-09 at 12:50

            VirtualBox v. 6.1.28 is buggy, use another version (e.g. 6.1.26) which you can download from https://www.virtualbox.org/wiki/Download_Old_Builds_6_1

            Source https://stackoverflow.com/questions/69864455

            QUESTION

            Self-hosted gitlab runner. PATH environment variable has different contents than regular powershell
            Asked 2021-Dec-30 at 16:53

            After some initial problems I was finally able to set up a self-hosted GitLab Runner on my personal laptop.

            I'm now looking into how this runner works and how I can tweak it's environment to my needs. I modified the YML file to run a simple command echoing the PATH environment variable:

            ...

            ANSWER

            Answered 2021-Dec-30 at 16:53

            There's a few reasons why environment variables may be different. Chiefly:

            1. The user account being used by the runner
            2. The powershell profile you're using locally (which will not be used by the runner)
            3. Any changes to environment variables made in the runner's config.toml
            4. environment variables changed/added through CI/CD variables.
            User account

            The effective PATH is a combination of both the system environment variables as well as user environment variables. For your runner to reflect the same environment variables that you see locally when running powershell, you must use the same user account, otherwise user environment variables you're seeing may be missing/different based on the user account.

            One way to fix differences that may be caused by the user would be to change the user used by the gitlab service

            To change the user used by the GitLab runner, go to services -> gitlab-runner -> (right-click) properties -> Log On tab and choose the account the runner should use.

            Alternatively, specify this when installing the runner:

            Source https://stackoverflow.com/questions/70532683

            QUESTION

            Cant run virtualbox after updating mac to 12.0.1 monterey - error with host only adapter
            Asked 2021-Dec-26 at 05:08

            I'm running a virtualbox image using vagrant on mac. Everything worked fine untill I updated to the latest Mac version (12.0.1 Monterey).

            When I try to start up the machine using vagrant up I get the following error:

            ...

            ANSWER

            Answered 2021-Nov-08 at 16:24

            Restart your PC and run these commands:

            Source https://stackoverflow.com/questions/69839697

            QUESTION

            docker-machine unable to create a machine on macOS, VBoxManage returning E_ACCESSDENIED error
            Asked 2021-Dec-15 at 14:47

            I have docker, docker-machine, and virtualbox installed using HomeBrew:

            ...

            ANSWER

            Answered 2021-Dec-15 at 14:47

            Thanks to this comment on Reddit, I was able to figure the issue out:

            1. find all the machines with docker-machine ls
            2. remove the ones you don't need with docker-machine rm -y
            3. find all the "host-only ethernet adapters" with VBoxManage list hostonlyifs
            4. Remove the orphaned ones with VBoxManage hostonlyif remove
            5. Create a vbox folder in the etc directory with sudo mkdir
            6. Create a file networks.conf in the vbox folder, for example by sudo touch
            7. place the below line there

            Source https://stackoverflow.com/questions/70281938

            QUESTION

            Pod name resolution for StatefulSet doesn't work
            Asked 2021-Oct-27 at 11:14

            I have the following Kubernetes YAML with a StatefulSet I use to deploy a PostgreSQL cluster with Patroni. However, the question is relative to how Kubernetes registers Pod names in CoreDNS.

            According to this documentation in the Stable Network ID section if I create a Headless service called spilodemo-svc for my Pods I can access them using the short hostname (podname.servicename):

            ...

            ANSWER

            Answered 2021-Oct-27 at 11:14

            After almost three days of tests, I found a solution. The solution depends on two things:

            1. how Kubernetes works;
            2. how Patroni works.

            How Kubernetes Works

            When you create a StatefulSet deployment (but this is true also for Deployment), let's say with 3 pods, Kubernetes register in CoreDNS three DNS names:

            Source https://stackoverflow.com/questions/69577282

            QUESTION

            Slurm jobs queued but not running
            Asked 2021-Oct-14 at 09:55

            I'm trying to install slurm on Virtualbox running Ubuntu. We're using it to run long-running jobs via a web interface and we use slurm to queue and run the jobs. I'm using VirtualBox to create a sandbox for development.

            I've set slurm up, but when I queue a job and run squeue I get:

            ...

            ANSWER

            Answered 2021-Oct-14 at 06:34

            It turned out to be a configuration error.

            In the config file /etc/slurm-llnl/slurm.conf, I'd left the configuration NodeName as the default NodeName=localhost[0-31]. Since I am running on a single host it should have been set to NodeName=localhost for a single node on the same machine.

            Slurm Single Instance had a description of what the values should be set to, which helped me find the answer.

            Install Slurm on a stand alone Ubuntu had the instructions I originally followed.

            Source https://stackoverflow.com/questions/69564823

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install virtualbox

            Assuming we are building for bromolow platform and DSM version 6.1 following commands need to be executed. At this point you should have something like this. Next we need to build our package. After second command you should check if you have spk package. If not check log.build and log.install in build_env/ds.bromolow-6.1/ folder to see what went wrong.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/seba76/virtualbox.git

          • CLI

            gh repo clone seba76/virtualbox

          • sshUrl

            git@github.com:seba76/virtualbox.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Consider Popular Network Attached Storage Libraries

            Try Top Libraries by seba76

            virtualbox4dsm

            by seba76Python

            phpvirtualbox4dsm

            by seba76PHP

            qemu4dsm

            by seba76JavaScript

            subliminal

            by seba76Python