Battery | bash script to display your Laptop 's battery status

by Goles Shell Version: 1.4 License: MIT

X-Ray Key Features Code Snippets(3)Community Discussions(10)Vulnerabilities Install Support

kandi X-RAY | Battery Summary

Battery is a Shell library typically used in Utilities, Discord applications. Battery has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. You can download it from GitHub.

Battery is a little bash script that uses Spark to display the battery status on your tmux sessions or the terminal.

Support

Quality

Security

License

Reuse

Support

Battery has a low active ecosystem.

It has 258 star(s) with 38 fork(s). There are 6 watchers for this library.

It had no major release in the last 12 months.

There are 4 open issues and 17 have been closed. On average issues are closed in 249 days. There are 3 open pull requests and 0 closed requests.

It has a neutral sentiment in the developer community.

The latest version of Battery is 1.4

Quality

Battery has 0 bugs and 0 code smells.

Security

Battery has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

Battery code analysis shows 0 unresolved vulnerabilities.

There are 0 security hotspots that need review.

License

Battery is licensed under the MIT License. This license is Permissive.

Permissive licenses have the least restrictions, and you can use them in most projects.

Reuse

Battery releases are available to install and integrate.

Installation instructions, examples and code snippets are available.

Top functions reviewed by kandi - BETA

kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of Battery

Get all kandi verified functions for this library.

Battery Key Features

No Key Features are available at this moment for Battery.

Battery Examples and Code Snippets

Replaces the battery with the given battery .

java

Lines of Code : 4

License : Permissive (MIT License)

Copy

public void replaceBattery(CarBattery carBattery) {
        Assert.isNull(carBattery.getCharge(), "to replace battery the charge must be null");
        // ...
    }

Turns the battery on or off .

java

Lines of Code : 3

License : Permissive (MIT License)

Copy

public void turnOn() {
        // implementation
    }

Set the first car in the battery .

java

Lines of Code : 3

License : Permissive (MIT License)

Copy

public void setFirstCarInPark(Car firstCarInPark) {
        this.firstCarInPark = firstCarInPark;
    }

Community Discussions

Trending Discussions on Battery

How to get battery data in Inno Setup?

Adding battery management to anylogic model

How to measure energy usage in Xcode 13 / iOS15?

How expensive is WearableListenerService? (Wear Os)

The function pointer is changing its own address

How to change Tailwind CSS background color with Svelte, based on a value unpacked in #each?

How to request Ebox wifi with modbus

Nonlinear programming APOPT solver for optimal EV charging not infeasible with variables boundary <= 0 (GEKKO python)

Are periodic work requests supposed to execute immediately?

How to add a unique ID to each entry in my JSON object?

QUESTION

How to get battery data in Inno Setup?

Asked 2022-Mar-23 at 11:51

I understand it should be similar to the following code:

...

ANSWER

Answered 2022-Mar-22 at 21:10

This worked for me:

Source https://stackoverflow.com/questions/71575107

QUESTION

Adding battery management to anylogic model

Asked 2022-Mar-10 at 10:54

I've a question, in my model I want to add battery information to the transporter fleet. Think about when the battery level is below 30% the AGV moves after finishing a task to the closest charging station and stays there until the battery level is above a certain level.

So I was thinking about adding a parameter with the batterylevel to the agent type of the transport fleet.

But I have no clue how to create battery management further.

Creating an event, which decrease the battery level every second based on the state of the AGV agent?

But this gives me 4 questions:

How can you check the battery level after a transporter is released?
How do you dynamically decrease the transporter fleet size based on the amount of charging AGVs.
How do you let the AGV move to the closest charging station.
Is there anywhere an example model for this problem?

Thanks.

...

ANSWER

Answered 2022-Mar-10 at 10:54

Your answer is a bit philosophical for SOF (and multiple questions in one...) but here goes...

Yes an event that runs every second inside an AGV is good, but it might make your model slow... Alternatively use the on transporter state change to save the start and end times of travel and then use that to calculate the travel time, or distance, and use that to deplete the battery.

You can check the battery level in the on release code for the transporter blocks

You need to have a variable inside transporters that set them to need charging. And then in the seize transporter logic you have a custom selection to not choose AGVs that need charging

When an AGV requires charging - that you identified in item 1, you create a new task that will only size that transporter and make it move to what ever location you calculated to be the closest charging station. You will control which transporter gets selected by this task using the custom seize action same as in item 2. This will be a separate flow chart where you create this logic to make transporters go for a charge.
Could not find a specific one about charging bu as you know there are lots of other examples about AGV

Source https://stackoverflow.com/questions/71422242

QUESTION

How to measure energy usage in Xcode 13 / iOS15?

Asked 2022-Feb-23 at 00:43

I'd like to confirm the battery usage of an app I am developing on iOS, specifically on Xcode 13 and iOS 15. (Note: This app previously showed no issues with battery usage on previous versions of iOS.)

Previously, it seems that there were two ways to gather energy usage information:

#1. On the device under Settings > Developer > Logging

As per Apple's documentation described in the section titled "Log Energy Usage Directly on an iOS Device".
However, on iOS15, I can't find any options for logging under Developer or anywhere under settings even when searching.

#2. Profiling via Instruments using the "Energy Log" template

As per the same documentation from Apple described in the section "Use the Energy Diagnostics Profiling Template".
While it is still available in Xcode 12, this template is missing in Xcode 13. Naturally, it's also not possible to profile an iOS15 device with Xcode 12.

Digging through the Xcode 13 release notes, I found the following:

Instruments no longer includes the Energy template; use metrics reporting in the Xcode Organizer instead. (74161279)

When I access the Organizer in Xcode (12 or 13), select an app and click "Energy" for all versions of the app, it shows the following:

Apple's documentation for "Analyzing the Performance of Your Shipping App" says:

"In some cases the pane shows “Insufficient usage data available,” because there may not be enough anonymized data reported by participating user devices. When this happens, try checking back in a few days."

Well over a year into production and having sufficient install numbers, I have a feeling that waiting a few days might not do much.

I would like to determine if this is a bug in my app or a bug in iOS15. How can energy usage data be gathered using Xcode 13 on iOS 15?

...

ANSWER

Answered 2022-Feb-23 at 00:43

After contacting Apple Developer Technical Support (DTS) regarding this issue, they provided me with the following guidance.

Regarding "insufficient usage data available" for energy logs accessible via the Xcode organizer:

DTS indicated that they do not publish the thresholds for active users and usage logs would be expected to be present if you have more that a few thousand active users consistently on each version of your app. If your app meets this criteria and still does not show energy logs, DTS recommended opening a bug report with them.

Regarding how to collect energy log data for your app:

DTS recommended using MetricKit to get daily metric payloads. Payloads are delivered to your app every 24 hours and it is then possible to consume them and send them off device.

The instantiation of this is vey basic and can be as simple as:

Source https://stackoverflow.com/questions/69354959

QUESTION

How expensive is WearableListenerService? (Wear Os)

Asked 2022-Feb-19 at 06:02

I am working on a new wear application with a companion mobile app.
It will rarely be necessary to transfer information from the mobile to the watch via Bluetooth connection.
The main wear app is standalone, so transferring data from the mobile phone is a luxury because it will be a more convenient way to set up user preferences than doing it on the watch (Although the settings menu will also exist on the watch).

So I have a dilemma between two options:

Listen to messages coming through the Bluetooth connection only when the app is open on the watch.
The advantage here is resource savings and efficiency (but the question is how much).
The disadvantage is a lesser user experience.
Set up a WearableListenerService that will always listen to messages coming from the mobile phone.
The advantage here is a high user experience since the user will not have to open the app on the watch in order to transfer the data.
The disadvantage here is a waste of resources (and again the question of how much).

What should I do?
How expensive is WearableListenerService in terms of system resources and battery life in particular?

...

ANSWER

Answered 2022-Feb-19 at 06:02

As per the WearableListenerService docs:

The life-cycle of this service is managed by Android Wear. This service will be bound to and events delivered as a result of various Android Wear events, including data, messages and events indicating a device has connected or disconnected from the Android Wear network.

This means that the service is only created when Wear has data, messages, etc. to deliver to your app - when there isn't anything to deliver, the service is destroyed and takes up no resources whatsoever.

If you have any case where you want to receive callbacks while your process is not already open, then implementing a WearableListenerService is exactly what you should be doing.

Source https://stackoverflow.com/questions/71178766

QUESTION

The function pointer is changing its own address

Asked 2022-Feb-17 at 07:53

I am first time using function pointers and ran into a weird problem. I am writing a code for STM32G4xx. The main idea is to transmit and receive data through LPUART. I have implemented simple FSM to handle TX and RX. LPUART configured in DMA interrupt mode. I have typedef the function pointer and declared the three function pointer variables (ISR handles) in main.h file as follow:

...

ANSWER

Answered 2022-Feb-17 at 07:53

As per @Lundin's suggestion, I have put a watchpoint on lpuart_dma_rx_tc_isr_clback function pointer variable. It exposed the out of index bug in my code. The bug is inside while loop in main.c.

Source https://stackoverflow.com/questions/71139143

QUESTION

How to change Tailwind CSS background color with Svelte, based on a value unpacked in #each?

Asked 2022-Feb-08 at 13:51

I am a beginner in both Svelte and Tailwind and want to avoid an XY-Problem, so here is my goal:

I generate rows of a table with an #each loop in Svelte. (6 values per row). I now want to conditionally color the background of this row based on one value (the battery charge).

My idea was to conditionally render different tags based on this value. Like this:

...

ANSWER

Answered 2022-Feb-08 at 12:13

I think you should change approach for that problem. You could use the class:name element directive.

A class: directive provides a shorter way of toggling a class on an element.

Example

Source https://stackoverflow.com/questions/71032856

QUESTION

How to request Ebox wifi with modbus

Asked 2022-Jan-30 at 16:01

I've never used modbus before.

I have an eBox-Wifi Epever connected to an MPPT charge controller TRIRON for solar power.

I was able to make it connect to my wifi and now has an accessible IP : 192.168.39.149

I just want to extract some data from it, battery Voltage, etc...

On http://192.168.39.149:80, i have a web interface for administration. (Which is not what i want.)

After an nmap, I see that there is port 8088 open. (Can use modbus there maybe ? no web interface on this port.)

I installed and used modbus_cli like that modbus -b 115200 -p 1 192.168.39.149:8088 3101 but I can't make it return anything...

https://files.i4wifi.cz/inc/_doc/attach/StoItem/7068/MODBUS-Protocol-v25.pdf

http://www.solar-elektro.cz/data/dokumenty/1733_modbus_protocol.pdf

https://github.com/favalex/modbus-cli

EDIT : I changed for baud 9600 and port 502. (Which are the defaults for modbus ?)

...

ANSWER

Answered 2021-Dec-26 at 14:42

Try python modpoll tool with the following configuration, install modpoll via pip install modpoll if not installed.

Create a local config file, e.g. epever.csv, only added voltage/current/power values for testing.

Source https://stackoverflow.com/questions/70421066

QUESTION

Nonlinear programming APOPT solver for optimal EV charging not infeasible with variables boundary <= 0 (GEKKO python)

Asked 2022-Jan-27 at 10:38

I have tried to do optimal EV charging scheduling using the GEKKO packages. However, my code is stuck on some variable boundary condition when it is set to be lower than or equal to zero, i.e., x=m.Array(m.Var,n_var,value=0,lb=0,ub=1.0). The error message is 'Unsuccessful with error code 0'. Below is my python script. If you have any advice on this problem, please don't hesitate to let me know.

Thanks,

Chitchai

...

ANSWER

Answered 2022-Jan-26 at 19:57

When the solver fails to find a solution and reports "Solution Not Found", there is a troubleshooting method to diagnose the problem. The first thing to do is to look at the solver output with m.solve(disp=True). The solver may have identified either an infeasible problem or it reached the maximum number of iterations without converging to a solution. In your case, it identified the problem as infeasible.

Infeasible Problem

If the solver failed because of infeasible equations then it found that the combination of variables and equations is not solvable. You can try to relax the variable bounds or identify which equation is infeasible with the infeasibilities.txt file in the run directory. Retrieve the infeasibilities.txt file from the local run directory that you can view with m.open_folder() when m=GEKKO(remote=False).

Maximum Iteration Limit

If the solver reached the default iteration limit (m.options.MAX_ITER=250) then you can either try to increase this limit or else try the strategies below.

Try a different solver by setting m.options.SOLVER=1 for APOPT, m.options.SOLVER=2 for BPOPT, m.options.SOLVER=3 for IPOPT, or m.options.SOLVER=0 to try all the available solvers.
Find a feasible solution first by solving a square problem where the number of variables is equal to the number of equations. Gekko a couple options to help with this including m.options.COLDSTART=1 (sets STATUS=0 for all FVs and MVs) or m.options.COLDSTART=2 (sets STATUS=0 and performs block diagonal triangular decomposition to find possible infeasible equations).
Once a feasible solution is found, try optimizing with this solution as the initial guess.

Source https://stackoverflow.com/questions/70866642

QUESTION

Are periodic work requests supposed to execute immediately?

Asked 2022-Jan-15 at 03:34

EDIT (TL;DR)

I didn't realize there was more than one constructor for periodic work requests. The clue to my confusion was in the comments of the accepted answer.

Background

I have a few special cases I am trying to solve for while scheduling work. One of them involves doing work immediately and then creating a periodic work request. I found this in the Android's PeriodicWorkRequest documentation:

This work executes multiple times until it is cancelled, with the first execution happening immediately or as soon as the given Constraints are met.

I figured that this meant work would execute upon creating a request. However, this was not what happened in my test implementation. (For this work there is no need for a CoroutineWorker or network connection constraints but its applicable to my business need so I am testing it)

Starting Worker

...

ANSWER

Answered 2021-Sep-16 at 13:37

You are overthinking it. Please dump the JS:

https://developer.android.com/topic/libraries/architecture/workmanager/how-to/debugging

Use adb shell dumpsys jobscheduler

And just check what are the Unsatisfied constraints in the dump:

Source https://stackoverflow.com/questions/69000226

QUESTION

How to add a unique ID to each entry in my JSON object?

Asked 2022-Jan-13 at 18:59

I have this array of JSON objects:

and I want to add a unique ID (string) to each entry, like this:

...

ANSWER

Answered 2022-Jan-13 at 18:59

Instead of using a number/id in the recursive function I build a string.

Source https://stackoverflow.com/questions/70700607

Community Discussions, Code Snippets contain sources that include Stack Exchange Network

Vulnerabilities

No vulnerabilities reported

Install Battery

Linux support is still being tested. It ought to work properly in Debian and Ubuntu, but is largely untested in other distributions. Using linux requires upower, which should be included, or available, on most linux distributions. It's recommended to install this somewhere in your path that is writable, like /usr/local/bin. NOTE: This spark is not the same spark that you would install by doing. That is Apache Spark, which is a general engine for large-scale data processing.

Support

For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .

Find more information at: