Battery | An iOS battery monitor library

I've a question, in my model I want to add battery information to the transporter fleet. Think about when the battery level is below 30% the AGV moves after finishing a task to the closest charging station and stays there until the battery level is above a certain level.

So I was thinking about adding a parameter with the batterylevel to the agent type of the transport fleet.

But I have no clue how to create battery management further.

Creating an event, which decrease the battery level every second based on the state of the AGV agent?

But this gives me 4 questions:

1. How can you check the battery level after a transporter is released?
2. How do you dynamically decrease the transporter fleet size based on the amount of charging AGVs.
3. How do you let the AGV move to the closest charging station.
4. Is there anywhere an example model for this problem?

Thanks.

I'd like to confirm the battery usage of an app I am developing on iOS, specifically on Xcode 13 and iOS 15. (Note: This app previously showed no issues with battery usage on previous versions of iOS.)

Previously, it seems that there were two ways to gather energy usage information:

#1. On the device under Settings > Developer > Logging

• As per Apple's documentation described in the section titled "Log Energy Usage Directly on an iOS Device".
• However, on iOS15, I can't find any options for logging under Developer or anywhere under settings even when searching.

#2. Profiling via Instruments using the "Energy Log" template

• As per the same documentation from Apple described in the section "Use the Energy Diagnostics Profiling Template".
• While it is still available in Xcode 12, this template is missing in Xcode 13. Naturally, it's also not possible to profile an iOS15 device with Xcode 12.

Digging through the Xcode 13 release notes, I found the following:

Instruments no longer includes the Energy template; use metrics reporting in the Xcode Organizer instead. (74161279)

When I access the Organizer in Xcode (12 or 13), select an app and click "Energy" for all versions of the app, it shows the following:

Apple's documentation for "Analyzing the Performance of Your Shipping App" says:

"In some cases the pane shows “Insufficient usage data available,” because there may not be enough anonymized data reported by participating user devices. When this happens, try checking back in a few days."

Well over a year into production and having sufficient install numbers, I have a feeling that waiting a few days might not do much.

I would like to determine if this is a bug in my app or a bug in iOS15. How can energy usage data be gathered using Xcode 13 on iOS 15?

I am working on a new wear application with a companion mobile app.
It will rarely be necessary to transfer information from the mobile to the watch via Bluetooth connection.
The main wear app is standalone, so transferring data from the mobile phone is a luxury because it will be a more convenient way to set up user preferences than doing it on the watch (Although the settings menu will also exist on the watch).

So I have a dilemma between two options:

1. Listen to messages coming through the Bluetooth connection only when the app is open on the watch.
   The advantage here is resource savings and efficiency (but the question is how much).
   The disadvantage is a lesser user experience.

2. Set up a WearableListenerService that will always listen to messages coming from the mobile phone.
   The advantage here is a high user experience since the user will not have to open the app on the watch in order to transfer the data.
   The disadvantage here is a waste of resources (and again the question of how much).

What should I do?
How expensive is WearableListenerService in terms of system resources and battery life in particular?

I am first time using function pointers and ran into a weird problem. I am writing a code for STM32G4xx. The main idea is to transmit and receive data through LPUART. I have implemented simple FSM to handle TX and RX. LPUART configured in DMA interrupt mode. I have typedef the function pointer and declared the three function pointer variables (ISR handles) in main.h file as follow:

I am a beginner in both Svelte and Tailwind and want to avoid an XY-Problem, so here is my goal:

I generate rows of a table with an #each loop in Svelte. (6 values per row). I now want to conditionally color the background of this row based on one value (the battery charge).

My idea was to conditionally render different tags based on this value. Like this:

I've never used modbus before.

I have an eBox-Wifi Epever connected to an MPPT charge controller TRIRON for solar power.

I was able to make it connect to my wifi and now has an accessible IP : 192.168.39.149

I just want to extract some data from it, battery Voltage, etc...

On http://192.168.39.149:80, i have a web interface for administration. (Which is not what i want.)

After an nmap, I see that there is port 8088 open. (Can use modbus there maybe ? no web interface on this port.)

I installed and used modbus_cli like that modbus -b 115200 -p 1 192.168.39.149:8088 3101 but I can't make it return anything...

https://files.i4wifi.cz/inc/_doc/attach/StoItem/7068/MODBUS-Protocol-v25.pdf

http://www.solar-elektro.cz/data/dokumenty/1733_modbus_protocol.pdf

https://github.com/favalex/modbus-cli

EDIT : I changed for baud 9600 and port 502. (Which are the defaults for modbus ?)

I have tried to do optimal EV charging scheduling using the GEKKO packages. However, my code is stuck on some variable boundary condition when it is set to be lower than or equal to zero, i.e., x=m.Array(m.Var,n_var,value=0,lb=0,ub=1.0). The error message is 'Unsuccessful with error code 0'. Below is my python script. If you have any advice on this problem, please don't hesitate to let me know.

Thanks,

Chitchai

I didn't realize there was more than one constructor for periodic work requests. The clue to my confusion was in the comments of the accepted answer.

I have a few special cases I am trying to solve for while scheduling work. One of them involves doing work immediately and then creating a periodic work request. I found this in the Android's PeriodicWorkRequest documentation:

This work executes multiple times until it is cancelled, with the first execution happening immediately or as soon as the given Constraints are met.

I figured that this meant work would execute upon creating a request. However, this was not what happened in my test implementation. (For this work there is no need for a CoroutineWorker or network connection constraints but its applicable to my business need so I am testing it)

Starting Worker

I have this array of JSON objects:

and I want to add a unique ID (string) to each entry, like this: