DLOADTool | QHSDLOAD protocol on iPhone4 CDMA

DLOADTool is a C++ library. DLOADTool has no bugs, it has no vulnerabilities and it has low support. You can download it from GitHub.

these are just some little tools i made for interfacing with the qualcomm baseband in ios. they should work on iphone4s and iphone5 (although i've only tested them on iphone4s cdma). to build these tools you need xcode with the ios sdk, and iosopendev installed and setup (in the terminal switch the each directory and type "xcodebuild" to build the tool. before you can use any of the tools (other than iosusbenum) you should first upload commcenter so it won't interfere. first ssh onto the device and type the following command to unload commcenter. once commcenter is uploaded you can type "iosusbenum" to verify that the qualcomm baseband is no longer showing up in the device list. since the baseband no longer has any internal flash to store the baseband firmware, all the firmware is located on the device filesystem. to access these firmware files you first need to unzip them. to do this type. (for 6.x) cd /usr/local/standalone/firmware/baseband/trek unzip trek-personalized.zip. (for 5.x) cd /usr/standalone/firmware/trek unzip trek-personalized.zip. after the firmware has been unzipped you'll see a few different files. the important ones are bbticket.der, dbl.mbn, osbl.mbn, and amss.mbn. next you need to use bbtool to tell the device to enter dload mode (basically baseband's bootrom or dfu