pul | PÜL - A carpooling app designed for students to help | Frontend Framework library

Good afternoon, I am using stm32 Blue Pill on USB (CDC) com port, "IAR" development environment. I have connected a library 1, 2 for stm32 to work with W25Qxx SPI flash drives ...

I ran the tests in the main.c file as follows: Write byte, read byte, write page, read page, sector write, sector read, block write, block read. All checks were successful, the flash drive is working and there are no problems with the library.

The problem is as follows, when I connect via app or terminal to port and try to send data in "HEX" format 1E 01 0A 02 00 00 09 C4 03, and then write them into memory by the microcontroller (W25Qxx) then USB CDC freezes (crashes) when receiving data packets on stm32 and when reconnecting a message "USB device not recognized" appears on the computer.

3.3v power did not turn off!

In order for you to check this, I will give an example:

The project was created via STM32CubeMX.

Main.c

this is my tableau workbook

so i want to calculate day different between each transaction for each users, the users on this case are in filters PUL: True with this calculation

I have 2 columns in my tableau, user_id and createdAt. user_id as the id of the users, and createdAt as the date transaction happen.

This is my tableau

I take this user_id = 60 as the example, so I have 2 filters, for the conditions users (PUL : true)

and date_range : true so the data will appear on date range

on my tableau, i made calculated field called datediff with this query

this is my workbook

on that workbook, i calculate timediff between each transaction for each users. what i build first is the filters PUL with this calculate

I´m new to REST API and on the current project where I can create gallery categories and images inside the gallery I bumped into a problem. I have multiple objects within the parent array as seen below. Some of them containing image.

Good afternoon, I am using the switch construction, but I don’t know how to write correctly for other values after the case operators.

In the DisplayData code, in the switch construction, I assign a command number to the fields, for example: Vin = cp5.addTextlabel, so that later, when connecting via a com port, display or change the data by sending this command "60",123 in the Vin = cp5.addTextlabel field.

Only works in (minutess = cp5.addButton) - 10, (Vin = cp5.addTextlabel) - 60, (inputPULI = cp5.addNumberbox) - 40, (inputNapryzenieKV = cp5.addNumberbox) - 70

The main error is below (function "setText (String)" is undefined. See screenshot.

How do I fix this for variables and write it correctly?

ImageButton button;

RadioButton CheckBoxuvum; Documentation

CheckBox P4; Documentation

See the GUI file!

A task:

ImageButton (button) - 20, the goal is to get a picture change in the window by sending a command through a terminal or microcontroller.

P4 = cp5.addCheckBox - 30 CHECK, the goal is to get a change in the state of the checkbox on and off in the window by sending a command through a terminal or microcontroller.

CheckBoxuvum = cp5.addRadioButton - 50 +/-, the goal is to get a change in the state of the checkbox on and off (+/-) in the window by sending a command through a terminal or microcontroller.

In the Displaydata code, I marked this with a question.

In the future, I plan to send commands from the terminal via the com port to receive a change in the state of the data in the window for these values.

Screenshot of errors:

I will have to upload all the test project files so you can test this.

Com_Interface1:

I'm working on a light puls code, i want the light to go from value dark (0) then increase to bright (255).

I have been trying to use a "for" to get this to work but i am really unsure. The code starts with the light on 0, then i want to increase it to 255, then have a pause of 0.50 seconds then repeat

This is likely a very niche question.

I have a nifi system set up external to AWS it reads from an sqs queue and then puls files from an s3 bucket I have a role set on the account. but I now have a need to watch an sqs queue and pull from an s3 bucket on a different account.

I need to have my nifi access my account and then pull from a different teams sqs queue they have created an arn for my iam role to switch to.

Is this possible. I dont know if I need to change the queue URL in the GetSQS processor soit doesn't point directly at their queue.

this is developer repo pipeline