polyglot | Laravel localization and translation helper | Internationalization library

 by   Anahkiasen PHP Version: 1.3.1 License: No License

kandi X-RAY | polyglot Summary

kandi X-RAY | polyglot Summary

polyglot is a PHP library typically used in Utilities, Internationalization, Laravel applications. polyglot has no bugs, it has no vulnerabilities and it has low support. You can download it from GitHub.

Polyglot is a localization helper for the Laravel framework, it's an helper class to localize your routes, models and views. To install it, do composer require anahkiasen/polyglot:dev-master, then add Polyglot\PolyglotServiceProvider to the providers array in app/config/app.php. Publish config to your laravel app : php artisan config:publish anahkiasen/polyglot.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              polyglot has a low active ecosystem.
              It has 135 star(s) with 23 fork(s). There are 10 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 4 open issues and 26 have been closed. On average issues are closed in 216 days. There are 1 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of polyglot is 1.3.1

            kandi-Quality Quality

              polyglot has 0 bugs and 0 code smells.

            kandi-Security Security

              polyglot has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              polyglot code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              polyglot does not have a standard license declared.
              Check the repository for any license declaration and review the terms closely.
              OutlinedDot
              Without a license, all rights are reserved, and you cannot use the library in your applications.

            kandi-Reuse Reuse

              polyglot releases are available to install and integrate.
              Installation instructions are not available. Examples and code snippets are available.

            Top functions reviewed by kandi - BETA

            kandi has reviewed polyglot and discovered the below as its top functions. This is intended to give you an instant insight into polyglot implemented functionality, and help decide if they suit your requirements.
            • Saving a model
            • Extract translated templates .
            • Localize languages .
            • Register the polyglobals .
            • Clear the cache .
            • Get routes prefix
            • Set the internal locale
            • Compile locale .
            • Switch current language .
            • Execute a command .
            Get all kandi verified functions for this library.

            polyglot Key Features

            No Key Features are available at this moment for polyglot.

            polyglot Examples and Code Snippets

            Returns the mean value of the polyglot runtime
            javadot img1Lines of Code : 13dot img1License : Permissive (MIT License)
            copy iconCopy
            public double mean(int[] values) {
                    Context polyglot = Context.newBuilder()
                        .allowAllAccess(true)
                        .build();
                    String meanScriptContent = RUtils.getMeanScriptContent();
                    polyglot.eval("R", meanScriptContent)  

            Community Discussions

            QUESTION

            Karate - Get CSV column value having space
            Asked 2022-Mar-25 at 12:52

            I want to get the 'Instrument ID' column value of the below CSV data where the CSV column header having spaces

            ...

            ANSWER

            Answered 2022-Mar-25 at 12:52

            Use the JS "bracket" notation. For example, try this:

            Source https://stackoverflow.com/questions/71616479

            QUESTION

            Using GraalVM (scripting) within Wildfly/JBoss
            Asked 2022-Mar-07 at 17:33

            I want to use GraalVM (version 22.0.0.2 with Java 17.0.2) to execute JavaScripts within Wildfly (version 26.0).

            If I do have the following code:

            ...

            ANSWER

            Answered 2022-Mar-07 at 16:45

            You would have to add dependency on the org.graavml.polyglot module in your application or expose it like what is done with the module /sun/scripting/main/

            Source https://stackoverflow.com/questions/71384070

            QUESTION

            vim - How to Split single line Array literal into multiple lines?
            Asked 2022-Mar-06 at 16:33

            Say I have this:

            ...

            ANSWER

            Answered 2022-Mar-06 at 11:26

            Well, '<,'>s/,/,\r/g actually results in:

            Source https://stackoverflow.com/questions/71368046

            QUESTION

            renv + venv + jupyterlab + IRkernel: will it blend?
            Asked 2022-Feb-24 at 20:06
            Short version

            What is the simple and elegant way to use renv, venv and jupyterlab with IRkernel together? In particular, how to automatically activate renv from jupyter notebook that is not in the root directory?

            Long version

            I'm embracing a "polyglot" data science style, which means using both python and R in tandem. Now venv is awesome, and renv is awesome, and jupyterlab is awesome, so I'm trying to figure out what is the neat way to use them all together.

            I almost have it, so probably a few hints would be enough to finish this setup. Here's where I'm at.

            System

            Start with a clean OS, and install system level requirements: R + renv and Python + venv. For example on Ubuntu it would be approximatelly like that:

            ...

            ANSWER

            Answered 2022-Feb-24 at 20:06

            I opened this question as an issue in the renv github repo, and maintainers kindly provided a workaround. The contents of the notebooks/.Rprofile should be as follows:

            Source https://stackoverflow.com/questions/71242328

            QUESTION

            Defining two o more functions in karate-config.js
            Asked 2022-Feb-08 at 14:19

            My karate-config.js is:

            ...

            ANSWER

            Answered 2022-Feb-08 at 14:19

            No. It was never supposed to have been supported, I'm surprised it worked.

            Also refer: https://github.com/karatelabs/karate#multiple-functions-in-one-file

            Source https://stackoverflow.com/questions/71035022

            QUESTION

            Does GraalVM use same thread and heap space when calling polyglot functions?
            Asked 2022-Feb-02 at 20:50

            If I call R code from Java within GraalVM (using GraalVM's polyglot function), does the R code and the Java code run on the same Java thread (ie there's no switching between OS or Java threads etc?) Also, is it the same "memory/heap" space? That is, in the example code below (which I took from https://www.baeldung.com/java-r-integration)

            ...

            ANSWER

            Answered 2022-Feb-02 at 20:50

            does the R code and the Java code run on the same Java thread. Also, is it the same "memory/heap" space?

            Yes and yes. You can even use GraalVM VisualVM to inspect the heap: it provides standard Java view where you can see instances of FastR internal representations like RIntVector mingled with the rest of the other Java objects, or R view where you can see integer vectors, lists, environments, ...

            does the call rBindings.getMember("c").execute(values) cause the values object (an array of ints) to be copied?

            In general yes: most objects are passed to R as-is. Inside R you have two choices:

            • Explicitly convert them to some concrete type, i.e., as.integer(arg), which does not make a copy, but tells R explicitly how you want that value to be treated as "native" R type including R's value semantics.
            • Leave it up to the default rules, which will be applied once your objects is passed to some R builtin, e.g., int[] is treated as integer vector (but note that treating it as a list would be also reasonable in some cases). Again no copies here. And the object itself keeps its reference semantics.

            However, sometimes FastR needs to make a copy:

            • some builtin functions cannot handle foreign objects yet
            • R language often implicitly copies vectors, because of its value semantics, arguments coercion, etc.
            • when a vector is passed to native R extension, we need to move its data to off heap memory

            I would say that if you happen to have a very large vector, say GBs of data, you need to be very careful about it even in regular R. Note: FastR vectors are by default backed by Java arrays, so their size limitations apply to FastR vectors too.

            Finally, does calling a polyglot function (in this case customMean implemented in R) have the same overhead as calling a native Java function?

            Mostly yes, except that the function cannot be pulled and inlined into the surrounding Java code(+). The call itself is as fast as regular Java call. For the example you give: it cannot be optimized as you suggest, because the R function cannot be inlined(+). However, I would be very skeptical that any compiler can optimize this as you suggest even if both functions where pure Java code. That being said, yes: some things that compiler can optimize, like eliminating some useless computations that it can analyze well, is not going to work because of the impossibility to inline code across the Java <-> R boundary(+).

            (+) Unless you'd run the Java code with Espresso (Java on Truffle), but then you would not be using Context API but Espresso's interop support.

            Source https://stackoverflow.com/questions/70927140

            QUESTION

            Minimax returning illegal uci move - move generation doesn't update?
            Asked 2022-Jan-27 at 13:08

            When I test my code with the position r1bqkbr1/pp2pppp/2n1p2n/2p5/3P4/7N/PPP2PPP/RNBQKB1R w KQq - 3 6 the code below outputs ValueError: illegal uci: 'd8d7' in r1bqkbr1/pp2pppp/2n1p2n/2p5/3P4/7N/PPP2PPP/RNBQKB1R w KQq - 3 6 when run. The issue seems to be that the board is not updating after I push a new move (it still generates legal moves thinking it is black to move, when it is actually white to move). How do I fix this?

            ...

            ANSWER

            Answered 2022-Jan-27 at 13:08

            Comment out the board.pop() in the following.

            Source https://stackoverflow.com/questions/70877974

            QUESTION

            Is there a way to use a java object as an argument for a function and return one of said objects's values in GraalJS?
            Asked 2022-Jan-13 at 16:45

            I want to use a Java object new Train() as an argument to pass into a JavaScript function, here is the Java code

            ...

            ANSWER

            Answered 2022-Jan-13 at 16:45

            GraalJS (and GraalVM in general) has tight security/access controls by default. GraalJS is not exposing getSpeed() (or any other field or method) on the Train instance to JavaScript.

            You can open up access to all host fields/methods with a configuration setting:

            Source https://stackoverflow.com/questions/70689954

            QUESTION

            How to use pomless tycho artifacts in non-tycho project
            Asked 2022-Jan-06 at 14:26

            I have two projects:

            1. An Eclipse project build with pomless Tycho approach
            2. A plain Java project build with plain Maven, no OSGI, no Tycho

            I need to use some of the bundles from the 1st project in the 2nd project. I tried to install the jar files from the 1st project into a local maven repository using mvn clean install. And tried to reference them from the 2nd project. But I get the following error:

            Failed to execute goal on project ...: Could not resolve dependencies for project ...: Failed to collect dependencies at bpms:bpms.util.jdk:jar:0.1.0-SNAPSHOT: Failed to read artifact descriptor for bpms:bpms.util.jdk:jar:0.1.0-SNAPSHOT: Failure to find bpms:bundles:pom:1.0.0-SNAPSHOT in https://repo.maven.apache.org/maven2 was cached in the local repository, the resolution will not be reattempted until the update interval of central has elapsed or updates are forced -> [Help 1]

            The bpms.util.jdk-0.1.0-SNAPSHOT.pom file contains the following:

            ...

            ANSWER

            Answered 2022-Jan-06 at 14:26

            It seems that the simplest approach is to install jar files using mvn install:install-file. Here is a bat-file that could be useful for someone:

            Source https://stackoverflow.com/questions/70156835

            QUESTION

            Karate - want to get url along with query params in a variable
            Asked 2022-Jan-05 at 15:57

            Karate version - 1.0.0

            I want to get the queryparams and url and want to concat it and save it to a variable.. I'm using following syntax which doesn't work. when I use param in variable it says param not defined. Does anyone have any work around for this? When I use the following -

            ...

            ANSWER

            Answered 2022-Jan-05 at 15:57

            Following is the example with the corresponding request url & query params for which you can execute this scenario to get the response and GET Request as,

            Source https://stackoverflow.com/questions/70593764

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install polyglot

            You can download it from GitHub.
            PHP requires the Visual C runtime (CRT). The Microsoft Visual C++ Redistributable for Visual Studio 2019 is suitable for all these PHP versions, see visualstudio.microsoft.com. You MUST download the x86 CRT for PHP x86 builds and the x64 CRT for PHP x64 builds. The CRT installer supports the /quiet and /norestart command-line switches, so you can also script it.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/Anahkiasen/polyglot.git

          • CLI

            gh repo clone Anahkiasen/polyglot

          • sshUrl

            git@github.com:Anahkiasen/polyglot.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Consider Popular Internationalization Libraries

            formatjs

            by formatjs

            react-i18next

            by i18next

            version

            by sebastianbergmann

            globalize

            by globalizejs

            angular-translate

            by angular-translate

            Try Top Libraries by Anahkiasen

            underscore-php

            by AnahkiasenPHP

            flatten

            by AnahkiasenPHP

            html-object

            by AnahkiasenPHP

            flickering

            by AnahkiasenPHP

            cookie-monster

            by AnahkiasenJavaScript