Wifi_Password | program wifi_password use
kandi X-RAY | Wifi_Password Summary
kandi X-RAY | Wifi_Password Summary
Hi! this program Wifi_Password use this program on your Wifi.
Support
Quality
Security
License
Reuse
Top functions reviewed by kandi - BETA
- Help menu
- Crack a password
- Main entry point
Wifi_Password Key Features
Wifi_Password Examples and Code Snippets
Community Discussions
Trending Discussions on Wifi_Password
QUESTION
I'm trying to send sensor data from nodemcu ESP32 to firebase. When using the basic example shown below it worked fine, and also when viewing the sensor data without sending it to firebase. https://github.com/mobizt/Firebase-ESP32/tree/master/examples/Basic
However when I tried to edit the code a bit and send my sensor's data, I get an error, I would appreciate any help, code, and error attached.
...ANSWER
Answered 2020-May-29 at 03:29The setFloat method takes three parameters:
QUESTION
Below is the code. I should get output as 1, but getting 0. I am sure that my firebase details are correct such as host and authentication because the demo example runs perfect.
I am using esp32 with Arduino IDE 1.8.12. Arduino Json 5.13.5
...ANSWER
Answered 2020-Apr-29 at 16:55I have tried to access other nodes also and still getting 0. What can be the problem?
Could it be all your values are string instead of int?
Have you tried:
QUESTION
#include
#include
//Firebase settings
#define FIREBASE_HOST "..........firebaseio.com/" //cant share
#define FIREBASE_AUTH "..............." //cant share
//Wi-Fi settings
#define WIFI_SSID "kello"
#define WIFI_PASSWORD "8888"
//Define trigger and echo digital pins
const int trigPin = 4;
const int echoPin = 3;
// The amount of time the ultrassonic wave will be travelling for
long duration = 0;
// Define the distance variable
double distance = 0;
void setup()
{
Serial.begin(9600);
// Connect to Wi-Fi
Serial.print("Wi-Fi...");
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
Serial.print("Connecting...");
while (WiFi.status() != WL_CONNECTED)
{
Serial.print(".");
delay(500);
}
Serial.println();
Serial.print("Connected to: ");
Serial.println(WiFi.localIP());
Firebase.begin(FIREBASE_HOST, FIREBASE_AUTH);
// Ultrasonic sensor, set echo as Input and trigger as Output
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
}
void loop()
{
getDistance();
// Prints the distance value to the serial monitor
Serial.print("Distance: ");
Serial.println(distance);
delay(500);
}
void getDistance()
{
// Clear trigPin
digitalWrite(trigPin, LOW);
delayMicroseconds(2);
// trigPin HIGH por 10ms
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
//Reads echoPin, returns the travel time of the sound wave in ms
duration = pulseIn(echoPin, HIGH);
// Calculating the distance, in centimeters, using the formula described in the first section.
distance = duration * 0.034 / 2;
// Sends the distance value to Firebase
Firebase.setFloat("distance", distance);
}
ANSWER
Answered 2020-Mar-20 at 18:33What you are showing is not the serial console output, but the content of the compiler result.
When you open the serial console window in ArduinoIDE SerialMonitor right upper corner -> the little button right of the text a new window opens.
If not you have selected the wrong comport -> select the right one in Tools->port
If it opens, check the baud rate in the left lower corner it should match the baud rate in your program
QUESTION
The error is:
...ANSWER
Answered 2020-Mar-18 at 17:15Try to give the exact hardware you use.
The error message shows a problem flashing to a NodeMCU (NodeMCU 0.9 (ESP-12 Module)),your schematics show an Arduino UNO with an ESP module.
Check the following:
Is the correct hardware selected for flashing
Is the right driver installed for the usb port you use
Is the correct usb port selected
To sum it up - your program is not even transfered to the used hardware. Read the error message carefúlly its stating "FatalError('Failed to connect to" -> its not recognizing the attached hardware
QUESTION
I'm trying to get this code below to work which was working perfectly a year ago the last time I tried it. After running it I receive no notification in my app. Using in Arduino IDE on ESP32 module. No changes were made at all to the sketch that was once working other than updating the token. I do not get the "firebase error" message in the serial output so assuming no error.
...ANSWER
Answered 2020-Mar-02 at 10:36The Arduino Firebase library connects to Firebase via SSL port 443 (HTTPS method) for both FCM and RTDB.
Your above assumption is not correct.
Your device token is invalid or not existed.
You don't have to know the code inside the Arduino library. Google only accept secure connection for their services. The problems can be the device uid or redundant of FCM payload data. You accept your answer with your own assumption. No solution for this issue. You need to open the issue at GitHub repo.
QUESTION
I have an NodeMCU chip that needs to connect to my home wifi and post an http request. I use the chip in WIFI_STA_AP mode as I need the chip to both accept requests via http and issue requests by http.
I do not want to hard-code my home's SSID/Password into the chip, so I have written some code that places the ESP (NodeMCU) into AP mode, receives the SSID/Pass via an http request and saves it on EEPROM.
This works great.
In the code below, onTestWifi() is called when I call http://192.168.4.1/test_wifi?wifi_ssid=mySsid&wifi_password=myPassword. The ssid and password are provided to the WiFi.begin() function. However, if I accidentally type in the wrong password and use it in WiFi.begin(), the connection will always fail until reset the chip and then insert the correct password.
What am I missing? Is it possible to change the ESP's wifi credentials programmatically, without having to reset the chip? Resetting the chip causes the client (in the case, an iPhone app) to disconnect from the chip and this breaks the entire program flow.
Here's the experimentation code I am using:
...ANSWER
Answered 2020-Feb-26 at 17:43OK, so I figured it out. Had to add the line WiFi.disconnect(true) in the onTestWifi() function. Apparently it disconnects from the network and erases the credentials. This stuff is very poorly documented and I wasted days on it. I hope someone finds it useful.
QUESTION
I'm trying to make an IOT app. My android side is working good so far, however my ESP8266 is unable to read data from Firebase Database. There is no error while connecting to the internet using onboard ESP8266 though. Can anyone point to a possible error? Thank You
...ANSWER
Answered 2020-Feb-16 at 21:15For anyone encountering this issue. I got it working by removing the forward slash '/' at the end and the https:// from the start of Host Address.
QUESTION
I'm trying to establish the connection of NodeMCU v3 with Google Firebase. However I'm encountering multiple libraries error. I had made sure that no library is present in sketch folder. I had only installed them using add .ZIP option.
Here is my code:
...ANSWER
Answered 2020-Feb-11 at 21:17check which arduino json version you are using. If you are using version six roll it back to version five using the library manager in the arduino ide, this is the version the firebase client is looking for.
It is not erroring out due to the multiple libraries found issue because Arduino is just going to pick one for you it is erroring out due to the version mismatch with arduino json and the firebase client lib
QUESTION
#include
#include
#define FIREBASE_HOST "myproject07.firebaseio.com"
#define FIREBASE_AUTH "Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxvfig"
#define WIFI_SSID "xyz"
#define WIFI_PASSWORD "12xxxxxx"
float mv;
String fireStatus = "";
void setup() {
Serial.begin(9600);
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
Serial.print("Connecting to ");
Serial.print(WIFI_SSID);
while (WiFi.status() != WL_CONNECTED) {
Serial.print(".\n");
delay(500);}
Serial.println();
Serial.print("Connected to ");
Serial.println(WIFI_SSID);
Serial.print("IP Address is : ");
Serial.println(WiFi.localIP());
Firebase.begin(FIREBASE_HOST, FIREBASE_AUTH);
Firebase.pushFloat("/Num/number", 42.0);
// handle error
if (Firebase.failed()) {
Serial.print("setting /number failed:");
Serial.println(Firebase.error());
return;
}
Serial.print("number: ");
Serial.println(Firebase.getFloat("/Num/number"));
delay(1000);
}
void loop() {
}
ANSWER
Answered 2020-Jan-09 at 12:05As far as I can tell, it seems to be this issue Firebase.getFloat returning 0.0
Check if you can retrieve the value as a String. If so, its the bug, if not, then update your question.
An example:
QUESTION
After watching this video. https://www.youtube.com/watch?v=QBj8OLig8Kg Which is how to create a homekit system without having to use a brigde I wanted to create my own.
My idea is to have 2 different lights that are connected to the internet and I handle them with siri and 2 external buttons that can turn off the light without having to always use siri. (for example if my cell phone runs out of battery). All this in the same ESP 8266.
I could already operate the two lights without the need of a homebridge with the following code
...ANSWER
Answered 2019-Aug-24 at 03:05While writing my question I realized something and after thinking it better I think I should connect the relay of the output to a combined light key. in that way it would give the possibility of turning the light on and off in an analogical way. Sorry for the inconvenience! thank you
Community Discussions, Code Snippets contain sources that include Stack Exchange Network
Vulnerabilities
No vulnerabilities reported
Install Wifi_Password
Install requirements.txt pip install -r requirements.txt
Support
Reuse Trending Solutions
Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items
Find more librariesStay Updated
Subscribe to our newsletter for trending solutions and developer bootcamps
Share this Page
