RPi-Monitor-LCD | Add a LCD screen to RPi-Monitor

Install the dependencies with the following commands:. ##Finite State Machine behavior and configuration. Keyboard and backlight configuration. Initial state for the FSM identified by its unique name <state name>. Define the content of a page associated to a <state name>. Each line (identified by a unique line number for the page) defines the python command to be executed to display the page. Define event (for a source state, define what is the destination state when a key is pressed). On key pressed callback. This call back is executed during the transition between 2 states. To execute an action without changing the current state, it is required to used the special state named action. The special state named action is designed to execute action and comes back to the initial source state. A specific event prefixed by backto and followed by the name of the initial source state will be created and configured during the finite state machine initialisation. ##Customisation and plugin creation. The python command used into the configuration file can call additional libraries names plugins. Some plugins are provided inside this repository. If you want to create your own plugin, you should start with the template customization.py. You can etheir implement your code directly inside this file or copy this file to create a new plugin. If you create a new plugin, it will then be required to add the relevant import into rpimonitorlcd (The location to add the line is indicated in inline comment).
sudo apt-get install python-dev python-imaging python-imaging-tk python-pip
sudo pip install wiringpi2
sudo pip install fysom
sudo pip install spidev
Install PCD8544 library as follow:
Remove i2c-bcm2708 from /etc/modprobe.d/raspi-blacklist.conf
Add i2c-dev in /etc/modules
reboot or execute gpio load i2c