single-version | Small utility to define version string

 by   hongquan Python Version: 1.6.0 License: MIT

kandi X-RAY | single-version Summary

kandi X-RAY | single-version Summary

single-version is a Python library. single-version has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. However single-version build file is not available. You can install using 'pip install single-version' or download it from GitHub, PyPI.

Small utility to define version string for Poetry-style Python project
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              single-version has a low active ecosystem.
              It has 5 star(s) with 2 fork(s). There are 2 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 0 open issues and 1 have been closed. There are no pull requests.
              It has a neutral sentiment in the developer community.
              The latest version of single-version is 1.6.0

            kandi-Quality Quality

              single-version has no bugs reported.

            kandi-Security Security

              single-version has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

            kandi-License License

              single-version is licensed under the MIT License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              single-version releases are available to install and integrate.
              Deployable package is available in PyPI.
              single-version has no build file. You will be need to create the build yourself to build the component from source.

            Top functions reviewed by kandi - BETA

            kandi has reviewed single-version and discovered the below as its top functions. This is intended to give you an instant insight into single-version implemented functionality, and help decide if they suit your requirements.
            • Returns the version of a given package .
            Get all kandi verified functions for this library.

            single-version Key Features

            No Key Features are available at this moment for single-version.

            single-version Examples and Code Snippets

            Computes a single version of two characters .
            javadot img1Lines of Code : 10dot img1License : Non-SPDX (Apache License 2.0)
            copy iconCopy
            public static char solution4(String s, String t) {
                int ret = 0;
                for (int i = 0; i < s.length(); ++i) {
                  ret ^= s.charAt(i);
                }
                for (int i = 0; i < t.length(); ++i) {
                  ret ^= t.charAt(i);
                }
                return (char) ret;
              }  
            PIP Install uamqp on a RaspberryPi
            Pythondot img2Lines of Code : 4dot img2License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            /bin/sh: 1: cmake: not found
            
            RUN apt install -y cmake
            
            Receiving errors when trying to install virt-manager on MacOS monterey
            Pythondot img3Lines of Code : 6dot img3License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            brew untap jeffreywildman/homebrew-virt-manager
            brew tap rombarcz/homebrew-virt-manager
            brew install virt-manager
            
            https://github.com/Krish-sysadmin/homebrew-virt-manager/pull/2
            
            How can I install fastapi properly?
            Pythondot img4Lines of Code : 2dot img4License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            pip install --only-binary :all: fastapi[all]
            
            "ERROR: CMake must be installed to build dlib" when installing face_recognition
            Pythondot img5Lines of Code : 2dot img5License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            ERROR: CMake must be installed to build dlib
            
            unable to install pyodbc using python 3.10 in windows 10
            Pythondot img6Lines of Code : 2dot img6License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            pip install pyodbc‑4.0.32‑cp310‑cp310‑win_amd64.whl
            
            Bazel build file load multiple dependencies
            Pythondot img7Lines of Code : 3dot img7License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            load("@deps_1//:requirements.bzl", deps_1_requirement = "requirement")
            load("@deps_2//:requirements.bzl", deps_2_requirement = "requirement")
            
            pyaudio not working in linux in pycharm but work file in windows(dual boot)
            Pythondot img8Lines of Code : 2dot img8License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            sudo apt install libasound-dev portaudio19-dev libportaudio2 libportaudiocpp0
            
            copy iconCopy
            sudo CC=clang LDSHARED=clang python3.9 -m pip install TA-LIB
            
            sudo LDSHARED="clang -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions" \
            CC="clang -pthread" python3.9 -m pip install TA-LIB
            
            fr
            Unable to install pycontractions
            Pythondot img10Lines of Code : 5dot img10License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            $ sudo apt install openjdk-8-jdk
            $ sudo update-alternatives --set java /usr/lib/jvm/java-8-openjdk-amd64/jre/bin/java
            $ pip install language-check
            $ pip install pycontractions
            

            Community Discussions

            QUESTION

            Why do I get error "Could not find a version that satisfies the requirement scipy==1.5.3" when running "pip install -r requirements.txt"?
            Asked 2021-Jun-15 at 02:20

            I am trying to install all needed modules for an existing Django project. When I run pip install -r requirements.txt I get the following errors:

            ...

            ANSWER

            Answered 2021-Jan-26 at 13:05

            Inside your requirements.txt change scipy line with this scipy==1.6.0 and save. Now retry pip installation.

            Source https://stackoverflow.com/questions/65900701

            QUESTION

            Cannot install mysqlclient in virtualenv on new Mac
            Asked 2021-Jun-09 at 15:37

            I'm trying to get a project I have up and running on a Linux Ubuntu machine on a new MacBook Pro but I'm getting the following error when running pip install mysqlclient within a virtual environment. Please not, it install within issue in the main environment. I'm new to iOS so not sure where to go

            ...

            ANSWER

            Answered 2021-Jun-09 at 15:37

            QUESTION

            Not able to install pyregion
            Asked 2021-Jun-09 at 10:56

            I have python 3.9 installed in MacOS. I am not sure if that is the issue. I am trying to install dependencies for a astronomy data processing school. All the packages get installed but pyregion gives this huge error. I suspect if python 3.9 is the issue. I am not sure how to test if this works in python 3.7. If I downgrade python will it affect all the other dependencies that I have already installed?

            Pyregion documentation says 3.4 and above are supported. I am getting this error when I try to install pyregion:
            Not really sure what this means and how to resolve it.

            ...

            ANSWER

            Answered 2021-Jun-09 at 10:56

            Indeed, it looks like the pyregion package has not been updated in some time, and contains some C sources that are not compatible with Python 3.9. There is an existing issue for this.

            It seems the latest version in github at least works:

            Source https://stackoverflow.com/questions/67881319

            QUESTION

            GDAL (CentOS 8) Install Failing
            Asked 2021-Jun-09 at 08:38

            For the best part of today, I've been trying to get my head around how to install GDAL on my CentOS 8 server.

            I've researched on many different answers and solutions across different sites and across StackOverflow and nothing seems to be working! (I'm probably missing something obvious somewhere)

            I'm trying to install GDAL using the command pip3 install gdal

            Which in return, produces the following error:

            ...

            ANSWER

            Answered 2021-Jun-09 at 08:38

            It seems to be a bug with CentOS https://bugs.centos.org/view.php?id=18213

            gdal requires poppler-0.67, which is missing from official repositories. It is however present in the raven-extras repo: https://centos.pkgs.org/8/raven-extras-x86_64/poppler-0.67.0-22.el8.x86_64.rpm.html

            Or you can download it as is (arbitrarily named poppler0.67.rpm here) and use it when installing gdal.

            Source https://stackoverflow.com/questions/67877977

            QUESTION

            Why doesnt pip install bitarray work for me?
            Asked 2021-Jun-07 at 12:30

            So I am trying to use pip install bitarray but that results in a error, even I can't really understand. I have had this issue a while already with few other packages, today I installed a virtual environment and I tried to code again. I tried to install the package outside of this venv but I get the same error.

            ...

            ANSWER

            Answered 2021-Jun-07 at 11:49

            This part

            Microsoft Visual C++ 14.0 is required. Get it with "Build Tools for Visual Studio": https://visualstudio.microsoft.com/downloads/

            suggest that you should install Microsoft Visual C++ 14.0 before installing bitarray. bitarray's PyPI page hints that you need working C compiler before installing bitarray.

            Source https://stackoverflow.com/questions/67871050

            QUESTION

            auth_registrations_mapping error: could not create while pip install twilio on cmd with admin access
            Asked 2021-Jun-04 at 00:47

            Note: Most of the solutions to similar problem suggest that, I retry on CMD admin access. I have tried and still it wont install and returns similar error.

            ...

            ANSWER

            Answered 2021-Jun-04 at 00:47

            Twilio developer evangelist here.

            I believe you have hit the Windows path length limit of 260 characters, which is why this file is failing. You can enable longer paths by following the instructions in the Windows documentation here.

            Essentially, the Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem\LongPathsEnabled (Type: REG_DWORD) registry key must exist and be set to 1. Then, after a reboot you should be able to use longer paths and your installation should succeed.

            Source https://stackoverflow.com/questions/67800199

            QUESTION

            Heroku deployment and pyodbc
            Asked 2021-May-31 at 20:55

            Ok so I have been trying for days to deploy on Heroku. I can't even upgrade my account on Heroku to ask the question of how to go about this.

            I have a fully functioning emulated Django project on my computer. I initially used PythonAnywhere and loved it. Until I realized Braintree is not working and I can't load php, it is too restricted. I do have a ticked with them.

            So I moved to Heroku. The issue with Heroku is I can not even load it onto the site. I have it hooked to my GitHub. Now I can not load it because it refuses to built because of pyodbc will not load. I know this is shown by sql.h not found when installing PyODBC on Heroku. I am starting a new topic, because it is older. That being said I tried everything on here.

            I think part of the issue is that I do not have sudo access to either one of these. I tried logging in with su account my account password but apparently we do not have that access. I tried build packs on the Heroku, but they seem to not want to work for the pyodbc library. I also was thinking of an add on on Heroku, but then I would still have change a lot of code.

            Is there either a for dummies way to fix this? My sister who has been a programmer for years can't get it to work. Then me who is new can't. So we have a large spectrum experience between us. Sorry for the rant I have literally spent over 40 hours trying to get this to deploy.

            ...

            ANSWER

            Answered 2021-May-31 at 20:55

            You need to install it with a Heroku buildpack:

            https://elements.heroku.com/buildpacks/matt-bertoncello/python-pyodbc-buildpack

            That’ll give you the underlying MSODBC driver for Linux you need for pyodbc and django-pyodbc.

            Source https://stackoverflow.com/questions/67779864

            QUESTION

            Can't install cvxpy in pycharm
            Asked 2021-May-31 at 10:22

            So i tried to install cvxpy package in pycharm but the following error occurred:

            ...

            ANSWER

            Answered 2021-May-22 at 11:01

            As mentioned in cvxpy' install section, before using pip install you need to have 'Visual Studio build tools for Python 3' installed.

            This is exactly the error you get: error: Microsoft Visual C++ 14.0 or greater is required. Get it with "Microsoft C++ Build Tools": https://visualstudio.microsoft.com/visual-cpp-build-tools/

            Source https://stackoverflow.com/questions/67648712

            QUESTION

            Error installing pandas_profiling with Pip on Ubuntu 20.04
            Asked 2021-May-31 at 09:39

            pip install pandas_profiling

            fails at

            Running setup.py install for Bottleneck ... error ERROR: Command errored out with exit status 1: command: /home/me/venv/bin/python -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-u7f_8_0k/bottleneck_1375337c49c246109b2e650965628211/setup.py'"'"'; file='"'"'/tmp/pip-install-u7f_8_0k/bottleneck_1375337c49c246109b2e650965628211/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(file) if os.path.exists(file) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-pgrmqqqd/install-record.txt --single-version-externally-managed --compile --install-headers /home/me/venv/include/site/python3.9/Bottleneck cwd: /tmp/pip-install-u7f_8_0k/bottleneck_1375337c49c246109b2e650965628211/ Complete output (15 lines): running install running build running build_py running build_ext building 'bottleneck.reduce' extension creating build/temp.linux-x86_64-3.9 creating build/temp.linux-x86_64-3.9/bottleneck creating build/temp.linux-x86_64-3.9/bottleneck/src x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/home/me/venv/lib/python3.9/site-packages/numpy/core/include -I/home/me/venv/include -I/usr/include/python3.9 -c bottleneck/src/reduce.c -o build/temp.linux-x86_64-3.9/bottleneck/src/reduce.o -O2 In file included from bottleneck/src/reduce.c:1: bottleneck/src/bottleneck.h:4:10: fatal error: Python.h: No such file or directory 4 | #include | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/x86_64-linux-gnu-gcc' failed with exit code 1 ---------------------------------------- ERROR: Command errored out with exit status 1: /home/me/venv/bin/python -u -c 'import io, os, sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-u7f_8_0k/bottleneck_1375337c49c246109b2e650965628211/setup.py'"'"'; file='"'"'/tmp/pip-install-u7f_8_0k/bottleneck_1375337c49c246109b2e650965628211/setup.py'"'"';f = getattr(tokenize, '"'"'open'"'"', open)(file) if os.path.exists(file) else io.StringIO('"'"'from setuptools import setup; setup()'"'"');code = f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-pgrmqqqd/install-record.txt --single-version-externally-managed --compile --install-headers /home/me/venv/include/site/python3.9/Bottleneck Check the logs for full command output.

            I am on Ubuntu 20.04 and my python version is-

            Python 3.9.0+

            I tried installing Bottleneck separately,

            pip install Bottleneck --no-cache-dir

            but that also gives the same error. Have looked solutions to related topics,

            fatal error: Python.h: No such file or directory

            setup script exited with error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

            Failed building wheel for bottleneck error

            but no luck. Any help would be appreciated.

            ...

            ANSWER

            Answered 2021-May-31 at 09:39

            So.. finally this is what made it work... had to install python3.9-dev.

            Source https://stackoverflow.com/questions/67680452

            QUESTION

            How to correctly install PyICU on Heroku?
            Asked 2021-May-28 at 00:31

            I am trying to deploy my Python app on Heroku, but have been unsuccessful. It seems that a problem is occurring with the PyICU package, which I'm unsure how to correct. I've confirmed that this is the only issue with my deployment; when I remove PyICU from my requirements file, everything works. But of course my site can't work without it.

            Can anyone please guide me in how to correctly install this package on Heroku? I've tried various methods, including downloading the .whl file and then adding that to my requirements file, but then I get another error:

            ERROR: PyICU-2.7.3-cp38-cp38m-win_amd64.whl is not a supported wheel on this platform. I don't understand why - it's the correct Python and os version.

            Here are the relevant excerpts from the build log:

            ...

            ANSWER

            Answered 2021-May-26 at 15:55

            Why are you using the windows wheel (PyICU-2.7.3-cp38-cp38m-win_amd64.whl)? You probably need a manylinux wheel.

            You can also try pyicu-binary package.

            Source https://stackoverflow.com/questions/67646388

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install single-version

            You can install using 'pip install single-version' or download it from GitHub, PyPI.
            You can use single-version like any standard Python library. You will need to make sure that you have a development environment consisting of a Python distribution including header files, a compiler, pip, and git installed. Make sure that your pip, setuptools, and wheel are up to date. When using pip it is generally recommended to install packages in a virtual environment to avoid changes to the system.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            Install
          • PyPI

            pip install single-version

          • CLONE
          • HTTPS

            https://github.com/hongquan/single-version.git

          • CLI

            gh repo clone hongquan/single-version

          • sshUrl

            git@github.com:hongquan/single-version.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link