led-control | Advanced WS2812/SK6812 RGB
kandi X-RAY | led-control Summary
kandi X-RAY | led-control Summary
Advanced WS2812/SK6812 RGB/RGBW LED controller with on-the-fly Python animation programming, web code editor/control interface, 1D, 2D, and 3D display support, and E1.31 sACN support for Raspberry Pi
Support
Quality
Security
License
Reuse
Top functions reviewed by kandi - BETA
- Create a Flask application
- Calculate palette table
- Start the animation thread
- Calculate the table of all tables
- Update the LED color
- Return the perf percentile
- Set the range of pixels in pixels
- Set a range of pixels in pixels
- Callback called when a packet is received
- Stop the animation
led-control Key Features
led-control Examples and Code Snippets
float wave_sine(float t) {
return cos(6.283 * t) / 2.0 + 0.5;
}
float plasma_sines(float x, float y, float t,
float coeff_x, float coeff_y,
float coeff_x_y, float coeff_dist_xy) {
float v = 0.0;
v += sin((
usage: ledcontrol [-h] [--port PORT] [--host HOST] [--led_count LED_COUNT]
[--config_file CONFIG_FILE]
[--pixel_mapping_json PIXEL_MAPPING_JSON] [--fps FPS]
[--led_pin LED_PIN] [--led_data_rate LE
[
[-3, 3, 0],
[0, 3, 0],
[3, 3, 0],
[3, 0, 0],
[3, -3, 0],
[0, -3, 0],
[-3, -3, 0],
[-3, 0, 0]
]
Community Discussions
Trending Discussions on led-control
QUESTION
I'm trying to create a component for a list of tags that I should be able to import everywhere.
The component is called tag-list-component.ts
and is imported in my shared module :
ANSWER
Answered 2022-Jan-11 at 11:49You need to import MatFormFieldModule in the module where the TagListComponent is declared (ie - SharedModule)
QUESTION
I am working with a hardware PWM-LED-Controler called "PCA9635". This chip can be controlled in Arduino with the Library "PCA9635".
In the example provided in the library, an ledArray with the i2c address 0x70 is initiated by:
...ANSWER
Answered 2021-Aug-21 at 13:41Try
QUESTION
I have an Angular ReactiveForms FormArray which basically renders an expansion panel with file input. I want to pass the index of the FormArray's FormGroup against which a file gets selected. For this I am passing the index (bankAccountIndex) as an additional parameter to the file input (change) event. However, the value is always zero. If I hardcode the value in markup, then I get that value in code-behind, but not when I pass the index variable.
Below is my code:
...ANSWER
Answered 2020-Dec-30 at 10:44Your problem are the ids. You should assign unique id to the each of the inputs:
QUESTION
lets get right into it.
I am using typeof
to check if a variable API exists.
I learned that typeof
returns "undefined" if the variable does not exist.
ANSWER
Answered 2020-Feb-20 at 21:28You're calling a function that references the const API = {}
variable BEFORE that variable has been initialized, but inside the scope where it will be declared. With const
and let
, that is not allowed. You have this:
Community Discussions, Code Snippets contain sources that include Stack Exchange Network
Vulnerabilities
No vulnerabilities reported
Install led-control
Obtain a Raspberry Pi (any model), a WS2812B or SK6812B LED strip (SK6812 RGB/White LEDs are highly recommended), and a suitable 5V power supply.
Connect the LED strip to your Raspberry Pi: Pi GND to LED GND Pi GPIO18 to LED Data in Power supply ground to LED GND Power supply 5V to LED 5V See this Adafruit guide for other ways to connect the LED strips or for using a level shifter.
Python 3.7 or newer is required.
sudo apt-get install scons swig libev-dev python3-dev python3-setuptools
git clone --recurse-submodules https://github.com/jackw01/led-control.git
git checkout tags/v2.0.0
cd led-control
sudo python3 setup.py develop
sudo ledcontrol --led_count 150 (add --led_pixel_order GRBW if using RGBW LEDs)
Support
Reuse Trending Solutions
Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items
Find more librariesStay Updated
Subscribe to our newsletter for trending solutions and developer bootcamps
Share this Page