authlib | ultimate Python library in building OAuth | OAuth library

 by   lepture Python Version: 1.3.0 License: BSD-3-Clause

kandi X-RAY | authlib Summary

kandi X-RAY | authlib Summary

authlib is a Python library typically used in Security, OAuth applications. authlib has no bugs, it has no vulnerabilities, it has build file available, it has a Permissive License and it has high support. You can install using 'pip install authlib' or download it from GitHub, PyPI.

The ultimate Python library in building OAuth and OpenID Connect servers. JWS, JWK, JWA, JWT are included. Authlib is compatible with Python2.7+ and Python3.6+.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              authlib has a highly active ecosystem.
              It has 3699 star(s) with 370 fork(s). There are 60 watchers for this library.
              There were 1 major release(s) in the last 6 months.
              There are 53 open issues and 326 have been closed. On average issues are closed in 163 days. There are 4 open pull requests and 0 closed requests.
              OutlinedDot
              It has a negative sentiment in the developer community.
              The latest version of authlib is 1.3.0

            kandi-Quality Quality

              authlib has 0 bugs and 0 code smells.

            kandi-Security Security

              authlib has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              authlib code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              authlib is licensed under the BSD-3-Clause License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              authlib releases are available to install and integrate.
              Deployable package is available in PyPI.
              Build file is available. You can build the component from source.
              Installation instructions are not available. Examples and code snippets are available.
              It has 18615 lines of code, 1837 functions and 268 files.
              It has medium code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi has reviewed authlib and discovered the below as its top functions. This is intended to give you an instant insight into authlib implemented functionality, and help decide if they suit your requirements.
            • Create authorization response
            • Add query parameters to the query string
            • Add parameters to a URI
            • Generate a new token
            • Validate token request
            • Authenticate the token endpoint
            • Query authorization code
            • Validate the authorization request
            • Validate authorization redirect_uri
            • Create a token response
            • Create a list of required parameters
            • Decrypts the given ciphertext using the specified key
            • Create an OAuth authorization URL
            • Create a revocation endpoint for a token model
            • Wrap a request
            • Create the endpoint response
            • Create temporary credentials response
            • Create a bearer token generator
            • Validate a token request
            • Create token response
            • Validate an access token
            • Validate the code_verifier
            • Load the private key
            • Create an authorization response
            • Validates the token request
            • Validate the token request
            Get all kandi verified functions for this library.

            authlib Key Features

            No Key Features are available at this moment for authlib.

            authlib Examples and Code Snippets

            Authlib Playground,Local development
            Pythondot img1Lines of Code : 6dot img1no licencesLicense : No License
            copy iconCopy
            $ git clone git@github.com:authlib/playground.git
            
            $ pip install -r requirements.txt
            
            $ cp conf/dev.config.py.sample conf/dev.config.py
            
            $ export FLASK_APP=app.py
            $ export FLASK_DEBUG=1
            $ flask run
              
            Version 3.0.0 (OAuth)
            Pythondot img2Lines of Code : 0dot img2License : Permissive (BSD-3-Clause)
            copy iconCopy
            OAUTH_PROVIDERS = [
                {'name':'google', 'icon':'fa-google', 'token_key':'access_token',
                    'remote_app': {
                        'consumer_key':'GOOGLE KEY',
                        'consumer_secret':'GOOGLE SECRET',
                        'base_url':'https://www.googleapis.c  
            Authentication: OAuth
            Pythondot img3Lines of Code : 0dot img3License : Permissive (BSD-3-Clause)
            copy iconCopy
            # registration configs
            AUTH_USER_REGISTRATION = True  # allow users who are not already in the FAB DB
            AUTH_USER_REGISTRATION_ROLE = "Public"  # this role will be given in addition to any AUTH_ROLES_MAPPING
            # the list of providers which the user can c  
            Python multi stage docker container - local package
            Pythondot img4Lines of Code : 15dot img4License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            # install requirements
            COPY requirements.txt .
            COPY package/ package/
            RUN pip3 install --upgrade pip==21.3.1
            RUN pip3 install ./package
            RUN pip3 install --no-cache-dir -r requirements.txt
            
            constructs==10.0.9
            authlib
            Connect to superset using dex (oauth / openid connect) and mapping dex groups to roles
            Pythondot img5Lines of Code : 117dot img5License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            # Install additional packages and do any other bootstrap configuration in this script
            # For production clusters it's recommended to build own image with this step done in CI
            bootstrapScript: |
            #!/bin/bash
            rm -rf /var/lib/apt/lists/* &&
            How to set and access response of python code in next step in github workflow
            Pythondot img6Lines of Code : 27dot img6License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            name: Token
            
            on: [push]
            
            jobs:
              build:
                runs-on: ubuntu-latest
            
                steps:
                  - uses: actions/checkout@v2
                  - name: Get Token
                    env:
                      ACTIONS_ALLOW_UNSECURE_COMMANDS: 'true'
                    run: |
                      python -m pip 
            Examples of using authlib's httpx client asynchronously
            Pythondot img7Lines of Code : 7dot img7License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            async with authlib.integrations.httpx_client.oauth2_client.AsyncOAuth2Client() as client:
                ...
            
            client = authlib.integrations.httpx_client.oauth2_client.AsyncOAuth2Client()
            ...
            await client.aclose()
            
            Apache Superset TypeError while starting with OAuth authentication enabled
            Pythondot img8Lines of Code : 14dot img8License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            OAUTH_PROVIDERS = [{
                    "name": "github",
                    "icon": "fa-github",
                    "remote_app": {
                        "client_id": "" ,
                        "client_secret": "",
                        "api_base_url": "https://github.com",
                        "request_token
            Python authlib flask - how to revoke token / logout
            Pythondot img9Lines of Code : 8dot img9License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            from authlib.integrations.requests_client import OAuth2Session
            client = OAuth2Session(oauth.myOauth.client_id,
                                   oauth.myOauth.client_secret,
                                   scope=oauth.myOauth.client_kwargs['scope'])
            
            client.r
            Python authlib flask - how to handle refresh token?
            Pythondot img10Lines of Code : 6dot img10License : Strong Copyleft (CC BY-SA 4.0)
            copy iconCopy
            if session['oatoken']['expires_at'] - 2 < now:  # refresh 2 seconds early
                oatoken = oauth.myOauth2.fetch_access_token(
                    refresh_token=session['oatoken']['refresh_token'],
                    grant_type='refresh_token')
                session['oatok

            Community Discussions

            QUESTION

            Implementing Docusign Authentication using Requests
            Asked 2022-Feb-25 at 12:00

            I'm creating an Airbyte connector for Docusign's E-signature Rest API.

            Part of the process of implementing a connector is to write an authentication routine that extends the AuthBase class from requests.auth.

            The issue is that Docusign does not support refresh tokens for JWT grants. According to the docusign documentation:

            The access token granted by JWT Grant expires after one hour, and no refresh token is provided. After the token expires, you must generate a new JWT and exchange it for a new access token.

            You can reuse most of the old assertion, just modifying the IAT and EXP values and updating the signature, then submit the updated JWT to get a new access token. Generally, apps that use JWT should get a new access token about 15 minutes before their existing one expires.

            However, all of the examples in the "backend application flow" from this part of the requests documentation (which links to this page in the requests-authlib docs) only seem to allow an Auth2 workflow that includes a refresh token.

            How can I work around this to make it so that, each time a refresh token expires, a new request is made (with updated IAT EXP, and signature)?

            ...

            ANSWER

            Answered 2022-Feb-25 at 12:00

            Refresh tokens are a feature of the OAuth Authorization Code grant flow.

            The Authorization Code grant flow requires a human to authenticate themself. The result is an 8 hour access token and a 30 day refresh token.

            To obtain a new access token, either:

            • Ask the human to authenticate again
            • Or the app can use the refresh token to obtain a new access token. This can be done autonomously by the app, without bothering the human.

            For the JWT grant flow, there is no human and no refresh token. Instead, the app simply re-runs the JWT grant flow and receive a new 1 hour access token.

            When you re-do the JWT flow, create a new JWT (updated IAT, EXP, etc). Sign it with your private key, and send it to DocuSign to obtain a new access token.

            The JWT operation is cheap enough to do once per hour per impersonated user. But you must cache the access token and not re-do the JWT grant flow for each API call...

            Python authentication libraries

            Most authentication libraries for most languages focus on the Authorization Code grant flow since that is the most commonly used OAuth flow.

            But as you've pointed out, you're using the JWT flow. This means that you cannot use these libraries. Instead, you will need to roll your own. Good news is that it isn't too hard. Here's my pseudo code:

            Source https://stackoverflow.com/questions/71255162

            QUESTION

            Auth0, flask: Users need to login twice due to CSRF error
            Asked 2022-Feb-13 at 10:01

            When a user logs into my flask app it does not work first time, but it typically works on the second attempt. The following error occurs on the first login attempt:

            ...

            ANSWER

            Answered 2022-Feb-13 at 10:01

            I may have solved this question by updating my ntp on linux with the help of the following link: https://askubuntu.com/questions/254826/how-to-force-a-clock-update-using-ntp

            Source https://stackoverflow.com/questions/71069012

            QUESTION

            FLASK, How to redirect Google autentication to a local html.file
            Asked 2022-Feb-09 at 11:39

            Hi everyone I have implemented the Google Authentication with API. I would like that once the user is authenticated the page redirect to a local html/Javascript application. I am trying the following code which is not working because it is not finding the correct url.

            from flask import Flask, redirect, url_for, session, request, render_template from authlib.integrations.flask_client import OAuth import os from datetime import timedelta

            ...

            ANSWER

            Answered 2022-Feb-09 at 11:39

            you need to create folder called templates inside your project in this folder you will add your html file in your case it will be prova.html

            and change the return statement to

            Source https://stackoverflow.com/questions/71047272

            QUESTION

            Implementing Introspection Validation from Okta using Authlib in Python Flask App
            Asked 2021-Dec-23 at 07:01

            I am trying to implement introspection on client side suing Okta as my authorization server but continuously getting error {"error": "missing_authorization", "error_description": "Missing \"Authorization\" in headers."}

            My Implementation

            ...

            ANSWER

            Answered 2021-Dec-23 at 07:01

            I figured out the problem with the code, I just needed to provide Authorization manually to my api

            Here is the code

            Source https://stackoverflow.com/questions/70411084

            QUESTION

            Lambda function failing with /lib64/libc.so.6: version `GLIBC_2.18' not found
            Asked 2021-Dec-14 at 01:39

            I am trying to create a layer of simple-salesforce (Python Library) in AWS lambda, and trying to use it (import it) from my python code. I am having windows machine.

            Though I read that there might be issues due to compilation windows so I install ubuntu1804 from windows store and then went ahead with creating zip for lambda layers. (zip is created for python folder with structure "python/lib/python3.6/site-packages/......")

            I am using Python 3.6. I went through few articles for this issue but could find any resolution. this Video helped me creating a layer for Pandas & requests in AWS successfully with minor tweaks in pip commands I used

            ...

            ANSWER

            Answered 2021-Dec-14 at 01:39

            I changed my code to not use simple_salesforce library and work out all the logic with Requests ( using Salesforce REST APIs). This is not really ideal but I could get it working as I had some deliveries to meet.

            Source https://stackoverflow.com/questions/69475140

            QUESTION

            Allocating more RAM while decompiling Minecraft with MCP (Mod Coder Pack)
            Asked 2021-Dec-06 at 05:49

            I am trying to create a custom Minecraft client but first I need to decompile the source files with MCP but it fails. It fails with a JavaOutOfMemoryError. Here is the error:

            ...

            ANSWER

            Answered 2021-Dec-06 at 05:49

            Go to conf/mcp.cfg. Find this line

            Source https://stackoverflow.com/questions/70185054

            QUESTION

            Pass Python object as argument to function in "parfeval"
            Asked 2021-Nov-25 at 07:08

            I am trying to pass one Python object as an argument to a function that I am evaluating in the background with parfeval. The Python object is an instance of a Python class, and I detail it below. However, to reproduce the error, I will exemplify with a Python dictionary... However, simply using struct(pydict) would not work because I would lose all the attributes and methods in the Python class.

            Assume the Python dictionary is

            ...

            ANSWER

            Answered 2021-Nov-25 at 07:08

            One of the limitations of the MATLAB->Python support is that Python objects cannot be serialized. parfeval (and other parallel constructs) require serialization to transfer data from one MATLAB process to another.

            You might be able to work around this by having each worker build the data structure directly and storing it / accessing it via parallel.pool.Constant, like this:

            Source https://stackoverflow.com/questions/70104714

            QUESTION

            Output path from a minecraft 1.8.8 json file using only batch
            Asked 2021-Nov-15 at 12:27

            So,I am trying to collect paths from the minecraft 1.8.8 json file only using json file,

            Here is the content of 1.8.8.json (if you don't khow):

            ...

            ANSWER

            Answered 2021-Nov-15 at 12:27

            Remember that batch and cmd is not suitable to parse JSON file !

            But if you insist to use a batch file just give a try with this ugly code :

            Source https://stackoverflow.com/questions/69971396

            QUESTION

            How to configure Keycloak for Superset with Authlib?
            Asked 2021-Nov-03 at 21:33

            I'm trying to use Authlib to setup Keycloak as SSO for Superset. Everything works fine up until when user is redirected back to Superset. Then this error occured:

            ...

            ANSWER

            Answered 2021-Sep-11 at 05:11

            I also had trouble with the OIDC configs, but this security manager configuration works for me.
            Note - I've added roles to my Client configuration in Keycloak, and a mapper so the roles can be picked from the user info response.

            Source https://stackoverflow.com/questions/68740263

            QUESTION

            How to set and access response of python code in next step in github workflow
            Asked 2021-Oct-13 at 23:00

            How to set and access the response of python code to a variable in github workflow. I have to use the token which is generated from the python code in the step Create container web in the Auth_Header

            ...

            ANSWER

            Answered 2021-Oct-13 at 23:00

            You could set an output using ::set-output and then get this output back in the next step using steps.[id].outputs.ACCESS_TOKEN:

            Source https://stackoverflow.com/questions/69562982

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install authlib

            You can install using 'pip install authlib' or download it from GitHub, PyPI.
            You can use authlib like any standard Python library. You will need to make sure that you have a development environment consisting of a Python distribution including header files, a compiler, pip, and git installed. Make sure that your pip, setuptools, and wheel are up to date. When using pip it is generally recommended to install packages in a virtual environment to avoid changes to the system.

            Support

            Homepage: https://authlib.org/.Documentation: https://docs.authlib.org/.Purchase Commercial License: https://authlib.org/plans.Blog: https://blog.authlib.org/.Twitter: https://twitter.com/authlib.StackOverflow: https://stackoverflow.com/questions/tagged/authlib.Other Repositories: https://github.com/authlib.Subscribe Tidelift: https://tidelift.com/subscription/pkg/pypi-authlib.
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            Install
          • PyPI

            pip install Authlib

          • CLONE
          • HTTPS

            https://github.com/lepture/authlib.git

          • CLI

            gh repo clone lepture/authlib

          • sshUrl

            git@github.com:lepture/authlib.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Explore Related Topics

            Consider Popular OAuth Libraries

            satellizer

            by sahat

            cpprestsdk

            by microsoft

            oauth2-server

            by thephpleague

            scribejava

            by scribejava

            socialite

            by laravel

            Try Top Libraries by lepture

            editor

            by leptureJavaScript

            mistune

            by lepturePython

            github-cards

            by leptureHTML

            flask-oauthlib

            by lepturePython

            flask-wtf

            by lepturePython