greenlight | really simple end-user interface | Frontend Framework library

 by   bigbluebutton Ruby Version: release-3.0.4 License: LGPL-3.0

kandi X-RAY | greenlight Summary

kandi X-RAY | greenlight Summary

greenlight is a Ruby library typically used in User Interface, Frontend Framework applications. greenlight has no bugs, it has a Weak Copyleft License and it has medium support. However greenlight has 1 vulnerabilities. You can download it from GitHub.

Greenlight is a simple front-end interface for your BigBlueButton server. At its heart, Greenlight provides a minimalistic web-based application that allows users to:.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              greenlight has a medium active ecosystem.
              It has 731 star(s) with 3849 fork(s). There are 68 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 37 open issues and 1809 have been closed. On average issues are closed in 25 days. There are 11 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of greenlight is release-3.0.4

            kandi-Quality Quality

              greenlight has 0 bugs and 0 code smells.

            kandi-Security Security

              greenlight has 1 vulnerability issues reported (0 critical, 0 high, 1 medium, 0 low).
              greenlight code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              greenlight is licensed under the LGPL-3.0 License. This license is Weak Copyleft.
              Weak Copyleft licenses have some restrictions, but you can use them in commercial projects.

            kandi-Reuse Reuse

              greenlight releases are available to install and integrate.
              Installation instructions are available. Examples and code snippets are not available.
              It has 13638 lines of code, 425 functions and 255 files.
              It has high code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi has reviewed greenlight and discovered the below as its top functions. This is intended to give you an instant insight into greenlight implemented functionality, and help decide if they suit your requirements.
            • Parses a boolean value .
            Get all kandi verified functions for this library.

            greenlight Key Features

            No Key Features are available at this moment for greenlight.

            greenlight Examples and Code Snippets

            No Code Snippets are available at this moment for greenlight.

            Community Discussions

            QUESTION

            Add image/button to React bootstrap table cell based on value of cell
            Asked 2022-Mar-27 at 19:12

            UPDATE: Here is a sandbox for my code. And I'm looking to end up with something like this.

            I have a bootstrap table with these columns: name, expDate, stoplight. The value in the stoplight column is based on the date in the expDate column. If the expDate is within 7 days of today it's red, between 7 and 21 days it's Yellow, and otherwise Green, see logic below. If all I want is to display the words, Red, Yellow, Green it works fine. The part where I'm getting stuck is I want to display a 'stoplight', a red or yellow or green circle/button in the column. I have a working css but I cannot figure out how to apply a custom format to a specific cell. Any help is appreciated.

            ...

            ANSWER

            Answered 2022-Mar-27 at 19:12

            You can pass a div element as data

            Source https://stackoverflow.com/questions/71637431

            QUESTION

            WPF: Tab through textboxes in user controls in a Treeview
            Asked 2022-Feb-25 at 09:38

            I'm trying to implement the Tab function in my application, but it seems like nothing i try works, so i guess i just don't understand how it is intended to be used.

            I have a User Control (lets call it MyControl) which contains a Text Box (as well as other stuff). The MyControl is used with a Tree View. It looks like this for the user (+ signs reveals the entire user control, aswell as child MyControl if there is any, Red Arrow shows expected Tab behavior):

            In MyControl i've set IsTabStop to false for all control except TextBox, well i've pretty much set my entire application to have IsTabStop = false. I've tried setting KeyboardNavigation.TabNavigation to both "Cycle" and "Continue" on both MyControl and the TreeView, as well as the page and window that contains the TreeView. And i've tried in different combinations (cycle on treeview, continue on mycontrol and vice versa, etc).

            I also tried setting TabIndex to the have the same order that the MyControl objects are created. (So the top one gets 1, second one gets 2, etc).

            But nothing that i have tried (in all different combinations) has ever even made tab go into the TextBox that i want it to go into. So my problem is not only that the order is wrong, It just selects the "treeview", making a dotted square around it. If i change some settings the focus just goes haywire to random elements, but never the textbox

            So, what am i doing wrong? How is Tab supposed to be implemented?

            Don't know what code to show, but: MyControl:

            ...

            ANSWER

            Answered 2022-Feb-25 at 09:38

            I added this part to within element. It fixed the problem.

            Source https://stackoverflow.com/questions/70974160

            QUESTION

            Adding Random Element to GenericList in C#
            Asked 2022-Jan-01 at 15:57

            I am trying to make a simple food delivery system by using data structures. I hold the Neighborhood names in an ArrayList and I hold the Delivery Count, Food Name and it's count in GenericList. I drew the schematic and attached the photo.

            I coded the program which prints the "Hood Name and it's delivery count" my code and my outputs are here:

            ...

            ANSWER

            Answered 2021-Dec-30 at 01:57

            I would use Lists of objects to define your data structure. And then LINQ to query, manipulate, etc. I think it will be more flexible and give you closer to what you want. Something like this:

            Source https://stackoverflow.com/questions/70523524

            QUESTION

            Simple "Traffic" light script in C#
            Asked 2021-Dec-13 at 15:24

            I have a simple code for changing a colour between red and green every x amount of seconds by activating and deactivating the 2 light game objects for red and green lights. Or that's what it should do, but nothing happens when I run it.

            ...

            ANSWER

            Answered 2021-Dec-09 at 19:43

            You should not start the Coroutine in Update(). This will start a bunch of new while loops (since you are using a while loop in the coroutine), and even if you weren't using while loops this would still end up switching the light every frame and create a bunch of problems.

            Instead start the coroutine in the Start() function. Also, you need to yeild after both switches not just in the middle (otherwise is just un-switches instantly)

            Source https://stackoverflow.com/questions/70295777

            QUESTION

            Bigbluebutton - Invalid BigBlueButton Endpoint and Secret
            Asked 2021-Oct-23 at 12:42

            My BBB secret is valid and is the same for Greenlight .env file.

            All of a sudden, I got the error

            Server Error - Invalid BigBlueButton Endpoint and Secret

            and when I run:

            ...

            ANSWER

            Answered 2021-Oct-23 at 12:42

            The issue was caused because of an expired Let's Encrypt SSL certificate. More information can be found here. Removing the certificate and updating the certificates resolves the issue.

            Source https://stackoverflow.com/questions/69506184

            QUESTION

            Bigblue-Greenlight Docker Rebuild is not reflecting changes added to files in app
            Asked 2021-Oct-23 at 09:46

            Let say i have in my bigblue-greenlight installation following files:

            ...

            ANSWER

            Answered 2021-Oct-23 at 09:46

            My solution was to make the changes inside that one container, then restart this one Docker container.

            Source https://stackoverflow.com/questions/69231213

            QUESTION

            How to parse two arrays from local JSON file using swift
            Asked 2021-Sep-07 at 11:41

            I have a JSON file:

            ...

            ANSWER

            Answered 2021-Sep-07 at 11:41

            Here is my solution for this. Note that I moved the url handling part to a separate function to make the posted code clearer

            Source https://stackoverflow.com/questions/69086398

            QUESTION

            Kubernetes liveness probe httpGet schema not working correctly
            Asked 2021-May-28 at 08:02

            I am deploying some web app on kubernetes and I want to set liveness probe for this application. When I configure my deployment with liveness probe, kubelet start health check. I was defined httpGet with scheme "HTTP" parameter but kubelet using https schema randomly.

            This is my liveness probe configuration:

            ...

            ANSWER

            Answered 2021-May-28 at 08:02

            Since you are explicitly stating livenessProbe to use HTTP, it's probably your application that redirects traffic to HTTPS. Make sure that your application returns a 200 OK on basepath /, and not a redirection (any of 3xx codes).

            You can either fix that, or use TCP probe

            Source https://stackoverflow.com/questions/67720625

            QUESTION

            Make RGB LED Light up brighter?
            Asked 2021-Apr-07 at 15:37

            I've been trying to make a traffic light simulator but am having trouble with making one RGB light up brightly (in the code it's referred to with (colour)Pin2). The first light works perfectly but the RGB on the left isn't working correctly. I succeeded in making it bright when the light is white, but when I try to make it yellow the light is so dim I can barely see it. It's wired correctly so I think there may be an error in the code. Here's the link to the project if anyone needs it https://www.tinkercad.com/things/g0UkhvSKylW-copy-of-traffic-light-with-pedestrian-crossing

            (also sorry for the messy code, I'm not that used to arduinos yet so I know the code isn't great)

            ...

            ANSWER

            Answered 2021-Apr-07 at 15:32

            I can't see anything wrong in your code. Actually it's not a software problem but a physics thing. If you measure the voltage between the legs of the LED, you will probably see that voltage changes according to your code. The thing is brightness is something you measure with your eye. There are some situations like you buy different colors of LEDS from the same supplier but brigthnes seems different.

            If you want to get even brightness with the all colors, you can try to make lighter colors darker from the code or try to use different value resistors on legs.

            Source https://stackoverflow.com/questions/66989112

            QUESTION

            Search Filter with Javascript
            Asked 2021-Mar-22 at 01:47

            I am trying to build a basic search filter where you search and a certain image appears on screen and I am trying to do this with javascript or simple jquery , I cannot seem to make the search work, and I am also wondering if it is possible to do a search based on a class name?

            Here is my HTML code

            ...

            ANSWER

            Answered 2021-Mar-21 at 21:45
            var input = document.getElementById('myInput');
            
            input.onkeyup = function () {
                var filter = input.value.toUpperCase();
                var lis = document.getElementsByTagName('li');
                for (var i = 0; i < lis.length; i++) {
                    var name = lis[i].className; // takes the classname
                    if (name.toUpperCase().indexOf(filter) >= 0) //Changed this part
                        lis[i].style.display = 'list-item';
                    else
                        lis[i].style.display = 'none';
                }
            }
            

            Source https://stackoverflow.com/questions/66737688

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install greenlight

            Greenlight is designed to work on a BigBlueButton 2.0 (or later) server. For information on installing Greenlight, checkout our Installing Greenlight on a BigBlueButton Server documentation.

            Support

            Greenlight is built using Ruby on Rails. Many developers already know Rails well, and we wanted to create both a full front-end to BigBlueButton but also a reference implementation of how to fully leverage the BigBlueButton API. We invite you to build upon Greenlight and help make it better. See Contributing to BigBlueButton. We invite your feedback, questions, and suggests about Greenlight too. Please post them to the Greenlight mailing list. To help with organization and consistency, we have implemented a Pull Request template that must be used for all Pull Requests. This template helps ensure that the project maintainers can review all PRs in a timely manner. When creating a Pull Request, please provide as much information as possible.
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/bigbluebutton/greenlight.git

          • CLI

            gh repo clone bigbluebutton/greenlight

          • sshUrl

            git@github.com:bigbluebutton/greenlight.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link