diode | Scala library for managing immutable application model

Let's look at your while loop in steps:

You may use an INSERT INTO ... SELECT, but you'll need CASE expressions for each of the 3 columns:

If you just want to check if the length of it:

This issue was resolved. After running the KMD driver for the NVDLA_IP_0 through the instruction mention in the comments and here by Ian Abbott, the node appeared in /pro/iomem.

I helped you yesterday with this UI, this is an extension of my suggestions.

First match the id of the menu items to the id in your toolitems then you can use Array#find() to get the object needed to create your new element. I simplified this only getting some text.

I also used a global draggableOptions object that you can pass to the new element draggable method. The stop event uses the suggestions I provided yesterday of how to loop over all the items to create an array of objects.

The following is not well styled and the items are very primitive but the dragging works as does the logging of array of items meta data that you can store

You are correct that there is currently no tgt_indices like feature in OpenMDAO. Though it is technically feasible, it does present some API design and internal practical challenges. If you feel strongly about the need/value for this feature, you could consider submitting a POEM describing your proposed API for the dev-team to consider. You have a start on it with your provided example, but you'd need to think through details such as the following:

• what happens if a user gives both src_indices and tgt_indices?
• What do error msgs look like if there are overlapping tgt_indices
• How does the api extend to the promotes function.

In the meantime you'll either need to use a MuxComponent, or write your own version of that component that would take in array inputs and push them into the combined matrix. Its slightly inefficient to add a component like this, but in the grand scheme of things it should not be too bad (as long as you take the time to define analytic derivatives for it. It would be expensive to CS/FD this component).

First of all, I tried running your code which gave me SMTP Class not found error, so I added another use statement use PHPMailer\PHPMailer\SMTP; to avoid future errors.

Then, I got the same error and solved it by generating an App Password, which was required for 2-Step Verified accounts.

I didn't really change your code, but I ran it in localhost.

If nothing works, you can set the debug mode $mail->SMTPDebug = 3; in order to get more details, and also I recommend checking out the SSL/TLS protocols, which I saw it from this thread: PHPMailer: SMTP Error: Could not connect to SMTP host

I hope that I didn't waste your time...

If your RS232-USB adapter is recognized by the kernel, it will create a virtual UART device usually named /dev/ttyUSB0 - this is your device to the modem. Note that nothing happens automatically to a modem you connect to the RS232-UART adapter, it's up to you to set it all up correctly.

To verify that the modem is OK and the UART link works, run a serial terminal and send it a few AT commands. I can recommend screen as a really simple serial terminal, e.g.: screen /dev/ttyUSB0 115200 (use sequence "Ctrl+A, \" to quit). Or minicom, which is the original modem client, but using this one requires reading the docs.

If your manual tests confirm that the modem is OK and can go online, it's time to configure a dial-up service. This depends on which network manager you've chosen. If all you have is the good old ifup/ifdown scripts in /etc/network/ then either use raw pppd or set up some helper like wvdial. Google is full of practical examples.

If you're running something like NetworkManager or connman/ofono, follow their documentation.

1. CapacityMode can have values 0 to 3, but if your device only supports mode 0 (capacity measured in milliamp-hours) or mode 1 (capacity measured in milliwatt-hours) then I think it is ok to have a 1-bit wide field to record this. You could even define an 8-bit field that only stores the values 0 or 1 even though it could hold values up to 255.

2. I think the authors of the examples may have been trying to align the fields into 8 bits by making each of the 4 status bits 2-bits wide - so 0, would be stored as 00 and 1 would be stored as 01 in the report. Or it could have been a typo - I have seen many other examples in the USB specifications that have errors in them.