fliclib-linux-hci | HCI_CHANNEL_USER capability of the Linux kernel

by 50ButtonsEach HTML Version: 2.0.3 License: No License

X-Ray Key Features Code Snippets Community Discussions(10)Vulnerabilities Install Support

kandi X-RAY | fliclib-linux-hci Summary

fliclib-linux-hci is a HTML library typically used in Networking, Nodejs applications. fliclib-linux-hci has no bugs, it has no vulnerabilities and it has low support. You can download it from GitHub.

This library is built on top of the HCI_CHANNEL_USER capability of the Linux kernel. This gives the library an exclusive access to directly access the bluetooth controller, which means no Bluetooth stack (like Bluez) is needed on the host side. This way we can (hopefully) guarantee stability compared to other solutions but also optimize the protocol to only exchange the packets that are needed for the Flic buttons to communicate. The downside however is that you will not be able to use that dedicated bluetooth controller for other bluetooth connections, such as streaming audio. If you need to use bluetooth for something else, you can always plug in an extra bluetooth dongle and dedicate that for Flic instead. The library consists of a client - server solution. The server is a software that runs and interacts with the bluetooth controller to connect to Flic buttons. Client programs can connect to this server using a simple well-documented API over a TCP socket to scan and connect Flic buttons and get their button events.

Support

Quality

Security

License

Reuse

Support

fliclib-linux-hci has a low active ecosystem.

It has 292 star(s) with 53 fork(s). There are 36 watchers for this library.

It had no major release in the last 12 months.

There are 48 open issues and 57 have been closed. On average issues are closed in 94 days. There are 2 open pull requests and 0 closed requests.

It has a neutral sentiment in the developer community.

The latest version of fliclib-linux-hci is 2.0.3

Quality

fliclib-linux-hci has 0 bugs and 0 code smells.

Security

fliclib-linux-hci has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

fliclib-linux-hci code analysis shows 0 unresolved vulnerabilities.

There are 0 security hotspots that need review.

License

fliclib-linux-hci does not have a standard license declared.

Check the repository for any license declaration and review the terms closely.

Without a license, all rights are reserved, and you cannot use the library in your applications.

Reuse

fliclib-linux-hci releases are available to install and integrate.

Installation instructions are not available. Examples and code snippets are available.

It has 11389 lines of code, 196 functions and 107 files.

It has low code complexity. Code complexity directly impacts maintainability of the code.

Top functions reviewed by kandi - BETA

kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of fliclib-linux-hci

Get all kandi verified functions for this library.

fliclib-linux-hci Key Features

No Key Features are available at this moment for fliclib-linux-hci.

fliclib-linux-hci Examples and Code Snippets

No Code Snippets are available at this moment for fliclib-linux-hci.

Community Discussions

Trending Discussions on Networking

Multicast being sent over hardware address of default gateway address instead of ethernet multicast address

How to extract street graph or network from OpenStreetMap?

Julia - not able to capture looped back UDP packets in Wireshark

In a vscode development container, is there a way to access the docker container from a different machine on the local network?

Floating IPs usage on Digital Ocean

How to create an edgelist from a dataframe (expand, group_by?)

Ubuntu16 LetsEncrypt R3 issue

Updated windows docker and now it doesn't work outside localhost

Networked aframe dynamic rooms not working with easy rtc

Return a list of mutual nodes between every pair of nodes in R

QUESTION

Multicast being sent over hardware address of default gateway address instead of ethernet multicast address

Asked 2022-Mar-10 at 14:07

I have this code to send multicast messages to a group. There are no errors while running the program but when I monitor packets in Wireshark the ethernet destination of my packets are of my default gateway instead of something like 01-00-5e-xx-xx-xx

The code:

...

ANSWER

Answered 2022-Mar-10 at 14:07

244.244.244.1 is not a valid multicast address.

Multicast address are in the range of 224.0.0.1 - 239.255.255.255. The address you're sending to is not in that range. So the outgoing MAC address is not a multicast MAC.

Change the destination IP to be in the range of multicast IP addresses and you'll see a proper multicast MAC address.

Source https://stackoverflow.com/questions/71419150

QUESTION

How to extract street graph or network from OpenStreetMap?

Asked 2022-Feb-17 at 16:03

How to extract street graph or network from OpenStreetMap ?

...

ANSWER

Answered 2022-Feb-17 at 15:56

Solutions:

There are many solutions to achieve this goal, I listed some of them below.

- Overpass-api

Overpass-api & overpass-turbo let you use overpass query language to collect ways and nodes of type highway for a city :

Source https://stackoverflow.com/questions/69174361

QUESTION

Julia - not able to capture looped back UDP packets in Wireshark

Asked 2022-Jan-14 at 08:46

I have a UDP sender program here:

...

ANSWER

Answered 2022-Jan-14 at 08:46

When I tried to change the destination ip address to 255.255.255.255 [broadcasting?]

Source https://stackoverflow.com/questions/70694929

QUESTION

In a vscode development container, is there a way to access the docker container from a different machine on the local network?

Asked 2022-Jan-01 at 05:35

I have an app (sveltekit) running inside and would like to access it from other devices on my local network.

I can access it normally from the host machine on localhost:3000.

I want to access it somehow from another machine on the local network. Is this possible? Sveltekit cli has --host flag, which outputs the following:

...

ANSWER

Answered 2022-Jan-01 at 05:35

All that was needed was to change the following VSCode setting. By default it was set to "localhost". Setting it to "allInterfaces" grants access to other devices on the local network.

Source https://stackoverflow.com/questions/70523216

QUESTION

Floating IPs usage on Digital Ocean

Asked 2021-Nov-27 at 00:12

I am looking for a basic thing yet I have not found not even a single good documentation on getting it done.

I want to allocate a floating IP, then associate it to a network interface of a droplet other than eth0. The reason is I want to have the ability to very easily switch from one IP to the other with a programming language.

In a few words, I want to be able to do these two commands and both should provide a different response.

...

ANSWER

Answered 2021-Nov-27 at 00:12

In the cloud (AWS. GCP etc.) ARP is emulated by the virtual network layer, meaning that only IPs assigned to VMs by the cloud platform can be resolved. Most of the L2 failover protocols do break for that reason. Even if ARP worked,the IP allocation process for these IPs (often called “floating IPs”) would not integrate with the virtual network in a standard way, so your OS can't just "grab" the IP using ARP and route the packets to itself.

I have not personally done this on Digital Ocean, but I assume that you can call the cloud's proprietary API to do this functionality if you would like to go this route.

See this link on GCP about floating IPs and their implementation. Hope this is helpful.

Here's an idea that needs to be tested:

Let's say you have Node1(10.1.1.1/24) and Node2(10.1.1.2/24)
Create a loopback interface on both VMs and set the same IP address for both like (10.2.1.1/32)
Start a heartbeat send/receive between them
When NodeA starts it automatically makes an API call to create a route for 10.2.1.1/32 and points to itself with preference 2
When NodeB starts it automatically makes an API call to create a route for 10.2.1.1/32 and points to itself with preference 1
The nodes could monitor each other to withdraw the static routes if the other fails. Ideally you would need a 3rd node to reach quorum and prevent split brain scenarios, but you get the idea right?

Source https://stackoverflow.com/questions/69919561

QUESTION

How to create an edgelist from a dataframe (expand, group_by?)

Asked 2021-Oct-23 at 14:32

I have a dataframe in R similar to the following:

...

ANSWER

Answered 2021-Sep-14 at 04:44

I really love a base R solution, so that's what you'll get from me. It's a bit hacky and ad hoc but it seems to get the job done pretty quickly.

Source https://stackoverflow.com/questions/69171494

QUESTION

Ubuntu16 LetsEncrypt R3 issue

Asked 2021-Sep-30 at 22:32

I've been trying to wrap my head around this issue all day, could someone help resolve or at least explain it as if I'm a child?

I have an Ubuntu 16 server, running openssl 1.1, & letsencrypt

R3 support expired last night and now an application doesn't work on all devices because it's intermediate signature is from R3 ?

I've removed the X3 from my cert chain providers and generated fresh SSLs with letsencrypt but it has not solved the issue.

...

ANSWER

Answered 2021-Sep-30 at 22:32

Okay, what I did was to use this config in getssl.cfg

Source https://stackoverflow.com/questions/69394817

QUESTION

Updated windows docker and now it doesn't work outside localhost

Asked 2021-Sep-23 at 10:38

I have been running a media cluster for sometime without any issues. I have everything networked into two different docker networks... the first network just bridges the docker instance to the local machine, the second network is a docker VPN container that I use for the other media services (an earlier version of what I am working on can be found here: https://github.com/Xander-Rudolph/MediaDocker)

The strangest thing happened today though. I ran the docker update for windows and now docker spools up without any errors or issues, however none of the services work outside of the machine running docker. Usually I have a poke through for a couple of the services in my router (namely wordpress/joomla which is on the bridge) and they work outside of my local network, but none of them are working anymore. I was able to confirm its not the DNS A record because I'm able to use the RDP ports I have mapped for my router, and when I test on another machine in the same network, it can't access the services via the internal IP (but it can RDP).

Anyone have any idea what could have changed to break this? I've already updated all my docker images and even rebuilt my VPN container (before I realized its a networking issue). What are some steps I can do to try to troubleshoot what is going wrong in docker to prevent access outside of localhost?

Update

I've been able to rule out the docker update as the root cause... I upgraded docker on my laptop (which was previously running the same version as my desktop) and its not having the same issue... this configuration must be localized to this desktop... No idea what the issue is... Will try a linux VM on the desktop instead of docker for windows...

Update 2

After a lot of screwing around in both a VM and in WSL, I'm still only able to access the docker services from localhost but not a different machine on my network or via the IP on the host machine (perhaps something similar to this: Can't access localhost via IP address). RDP does work so the computer is accessible but the services are not.

I'm not sure if this is a result of a docker networking config or a windows network config (I'm using WSL with docker installed on ubuntu 20.08) but I'm not seeing anything stick out. I'm going to remove the tag for docker windows but this is definitely an issue with networking and I suspect it has something to do with the fact that the containers are running behind a VPN... although I don't know why I would be able to access them on localhost but not the IP on another VM...

When I run

...

ANSWER

Answered 2021-Sep-21 at 02:43

Your question: "...What are some steps I can do to try to troubleshoot what is going wrong in docker to prevent access outside of localhost?..."

Troubleshooting help for you, first do you have multiple networking adapters (Ethernet, Wi-Fi, etc.) present on the host. First ensure, the priority of these adapters needs to be configured in correct order so the Windows networking stack can correctly choose gateway routes.

Now, to fix this set your primary internet-connected networking adapter to have the lowest InterfaceMetric value, use can use these Powershell commands from an elevated console:

Source https://stackoverflow.com/questions/69111163

QUESTION

Networked aframe dynamic rooms not working with easy rtc

Asked 2021-Sep-17 at 15:17

Issue

Hi, I've remixed a template for networked aframe dynamic rooms using a form:

https://glitch.com/edit/#!/power-lily-pancake?path=public%2Fscene.html%3A41%3A0

For some reason whenever I add these lines of code to the tag, the entire project breaks:

...

ANSWER

Answered 2021-Sep-17 at 15:17

afaik the dynamic-room component is designed to attach the networked-scene, not update it (since it doesn't handle updates). That's why the dynamic-room example scene does only have a dynamic-room component, and also why the dynamic-room is not working with networked-scene.

I'd throw all the networked-scene attributes to the dynamic-room setup, but it's also possible to make the two work together pretty much like you want it:

Source https://stackoverflow.com/questions/69138587

QUESTION

Return a list of mutual nodes between every pair of nodes in R

Asked 2021-Sep-10 at 20:25

I want to obtain a list of mutually connected nodes between every pair of nodes in my graph:

...

ANSWER

Answered 2021-Sep-10 at 19:00

This is not exactly efficient, it's a brute force double loop, but you can do

Source https://stackoverflow.com/questions/69127621

Community Discussions, Code Snippets contain sources that include Stack Exchange Network

Vulnerabilities

No vulnerabilities reported

Install fliclib-linux-hci

You can download it from GitHub.

Support

Binaries and libraries has been compiled for x86_64, i386 and armv6l. The minimum Linux kernel supported is 3.13. All code has been compiled and tested on Ubuntu 15.10 for desktop and Raspbian Jessy. This means it should be compatible with desktop systems and Raspberry Pi 1, 2 & 3. I have tried to make the binaries as portable as possible. If you have compiled your own kernel you must make sure to include support for Bluetooth. In kernel config, enable at least Networking support -> Bluetooth subsystem support -> Bluetooth device drivers -> HCI USB driver and HCI UART driver.

Find more information at: