WordPress | WordPress upstream for the Pantheon website platform | Content Management System library

 by   pantheon-systems PHP Version: 6.1.1 License: Non-SPDX

kandi X-RAY | WordPress Summary

kandi X-RAY | WordPress Summary

WordPress is a PHP library typically used in Web Site, Content Management System, Nginx, Wordpress applications. WordPress has no bugs, it has no vulnerabilities and it has low support. However WordPress has a Non-SPDX License. You can download it from GitHub.

This is a WordPress repository configured to run on the Pantheon platform. Pantheon is website platform optimized and configured to run high performance sites with an amazing developer workflow. There is built-in support for features such as Varnish, Redis, Apache Solr, New Relic, Nginx, PHP-FPM, MySQL, PhantomJS and more. .
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              WordPress has a low active ecosystem.
              It has 146 star(s) with 216 fork(s). There are 67 watchers for this library.
              OutlinedDot
              It had no major release in the last 6 months.
              There are 4 open issues and 63 have been closed. On average issues are closed in 754 days. There are 2 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of WordPress is 6.1.1

            kandi-Quality Quality

              WordPress has 0 bugs and 0 code smells.

            kandi-Security Security

              WordPress has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              WordPress code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              WordPress has a Non-SPDX License.
              Non-SPDX licenses can be open source with a non SPDX compliant license, or non open source licenses, and you need to review them closely before use.

            kandi-Reuse Reuse

              WordPress releases are not available. You will need to build from source code and install.

            Top functions reviewed by kandi - BETA

            kandi has reviewed WordPress and discovered the below as its top functions. This is intended to give you an instant insight into WordPress implemented functionality, and help decide if they suit your requirements.
            • Get the enclosures .
            • Parse an atom .
            • Parse the ID3 v3 version 2 . 2
            • Get posts .
            • Get debug data .
            • Returns the encoding of a given charset .
            • Multi - factor multiplication
            • Parse EML Information
            • Register theme control panel .
            • Decode a MPEG audio file .
            Get all kandi verified functions for this library.

            WordPress Key Features

            No Key Features are available at this moment for WordPress.

            WordPress Examples and Code Snippets

            No Code Snippets are available at this moment for WordPress.

            Community Discussions

            QUESTION

            Is it possible to add settings to "allow-plugins" in config section in composer.json through the CLI?
            Asked 2022-Mar-29 at 08:31

            Since composer 2.2 the setting allow-plugins will be compulsory I’ve tried to push this setting through the composer config command in the CLI but with no luck.

            I’ve tried a few commands like:

            • composer config --json '{"allow-plugins.composer/installers":true, "allow-plugins.dealerdirect/phpcodesniffer-composer-installer": true, "allow-plugins.roots/wordpress-core-installer": true }'

            • composer config config.allow-plugins '{"composer/installers":true, "dealerdirect/phpcodesniffer-composer-installer": true, "wordpress-core-installer": true}'

            • composer config --append "allow-plugins" "composer/installers":true, "dealerdirect/phpcodesniffer-composer-installer": true, "wordpress-core-installer": true

            • composer config --json "allow-plugins" '{"composer/installers":true, "dealerdirect/phpcodesniffer-composer-installer": true, "roots/wordpress-core-installer": true }'

            All I get is error messages like ".. is not defined" or that it is an invalid value.

            What I have is this:

            ...

            ANSWER

            Answered 2022-Mar-29 at 08:31

            You need to pass set them one by one.

            Source https://stackoverflow.com/questions/70580831

            QUESTION

            Failed to load next.config.js
            Asked 2022-Mar-11 at 12:03

            After cloning the repository I created and set my .env.local file, ran npm i then ran npm run dev. The server starts, env is loaded from .env.local however it immediately fails prompting me with the following:

            ...

            ANSWER

            Answered 2021-Oct-30 at 20:21

            I solved this by upgrading to the latest version of nodeJS

            Source https://stackoverflow.com/questions/69774152

            QUESTION

            EXPORTHOW and DECLARE - what are they?
            Asked 2022-Jan-30 at 01:25

            I have read an article by Jonathan Worthington about meta programming. There he writes:

            Do do this, we stick it in the EXPORTHOW module, under the name “class”. The importer pays special attention to this module, if it exists.

            At he same time here Jonathan uses DECLARE. Is there any documentation about that and other similar things? What and when should one use? What are other special things importer looks for?

            I tried to search the official docs but failed to find anything there.

            Thank you in advance!

            ...

            ANSWER

            Answered 2022-Jan-30 at 01:25

            where can we at least look at all possible things like that?

            Aiui the source code of the Rakudo compiler is as good as you're gonna get.

            It looks to me like EXPORTHOW is processed here, with DECLARE in particular here, as part of World.nqp.

            Afaik the World class is:

            • An internal implementation specific detail of Rakudo. It is not part of the Raku language. It is not something you can rely on. It is not officially supported.

            • Written in nqp. nqp is not Raku. It's essentially a small subset of Raku focused on being a good programming language for writing compilers.

            Source https://stackoverflow.com/questions/70893835

            QUESTION

            clarity.js by Microsoft slowing overall page loads
            Asked 2022-Jan-17 at 16:40

            I have a customer using bing tracking via https://bat.bing.com/bat.js.

            On December, 6th 2021 it started calling in clarity.js without the customer making any changes to their code.

            This slowed the overall page load by 1 second on mobile and 500ms on desktop. I've been trying to figure out how to disable this JS but I'm not sure what to do as it's being fired from the bing tracking js.

            The bing tracking code is being triggered via google tag manager.

            Anyone else having this issue and know how to disable clarity.js from being called at all?

            Customer is using Wordpress. Amazing Bing can implement code that slows down a site overall page speed without any notification to the customer.

            ...

            ANSWER

            Answered 2021-Dec-17 at 18:16

            We figured this out by going into our bing web tools and disabling the Clarity integration.

            Source https://stackoverflow.com/questions/70281265

            QUESTION

            vvv.test not loading (nor any of my sites) when running vagrant up
            Asked 2022-Jan-07 at 21:03

            Ever since I've upgraded my Mac to Monteray, I've been having issues with Vagrant.

            Initially, I use to see a vBoxManage error on terminal when running vagrant up. I posted a question on this on SO previously, see here for details.

            Today, I uninstalled VirtualBox again (removed VirtualBox VMs folder and moved application to trash) and reinstalled VirtualBox 6.1.3 for OS X hosts` (link here).

            I then ran vagrant up on terminal and it successfully compiled:

            After seeing the famous green teddy, I tried going to vvv.test but, the page doesn't load. I've tried accessing URLs of sites that have been provisioned before, but they too do not load.

            I've also ran vagrant up --debug, and nothing concerning was seen.

            My Vagrant version is 2.2.19

            Unsure what steps to take next?

            Edit:

            Steps taken:

            1. Have ran vagrant up --provision to provision sites in config.yml file (config.yml file can be seen below)
            2. Have tried to access website-dev.test, page doesn't load
            3. Have tried to access vvv.test, page doesn't load
            4. Have ran vagrant reload --provision and repeated steps 2 and 3, but same results
            5. Have ran vagrant halt and vagrant up and repeated steps 2 and 3, but same results

            I don't believe there's an issue in my config.yml file, as before Monteray update, everything was working fine (and I've made no changes to my yml file since). But, to cover all scenario's, here is my config.yml file:

            ...

            ANSWER

            Answered 2021-Dec-15 at 18:33

            Thanks to guidance from @Tinxuanna, I've managed to solve the issue (finally!).

            For anyone else having similar issues, here's what I did:

            1. Access the /etc/hosts folder
            2. Find file called hosts and open it in a text editor.
            3. Remove the IP addresses related to vagrant (I kept a backup of the original file just in case)
            4. After saving hosts file the IP addresses removed, I ran vagrant up --provision
            5. I then ran vagrant up
            6. Then accessed vvv.test
            7. You're done!

            Source https://stackoverflow.com/questions/70192942

            QUESTION

            How to get the image links from Gutenberg block gallery and add them as html data attributes to a button in wordpress
            Asked 2021-Dec-22 at 04:36

            I'm using gutenberg gallery block inside a post and I'm trying to create a button which contains all of the image ids in the gallery block as html data attributes such that later when I output the content to the page I can have access to those ids using javascript. Basically I'm trying to create a lightbox feature for a custom post type.

            The problem is that I can't get access to the gutenberg gallery block data.

            Here's my code

            ...

            ANSWER

            Answered 2021-Dec-22 at 04:34

            "it does not work, $ids is empty."

            That block is one of the default wordpress blocks, aka "core blocks". In order to have access to its data you would need to use parse_blocks function not get_post_gallery. That's why your variable is empty.

            So the overall workflow to get what you're looking for would be:

            1. Check whether your post has any blocks or not, using has_block function. has_blockDocs
            2. If it does, then get all of the blocks (including gallery block) using parse_blocks function. parse_blocksDocs
            3. parse_blocks will return an array of all blocks used in your post, so loop through them and see which one is called "core/gallery".
            4. "core/gallery" block has "attributes" and "ids" for each image you've added in the admin panel.
            5. Once you get the "ids", you should be able to create your custom button and image links using wp_get_attachment_image_url function. wp_get_attachment_image_urlDocs

            As a POC:

            Please see the following code:

            Source https://stackoverflow.com/questions/70416848

            QUESTION

            Using EXPORTHOW to make declarator that acts like "sub"
            Asked 2021-Dec-13 at 23:18

            The excellent 2011 Advent of Raku post Meta-programming: what, why and how provides a few clear examples of using EXPORTHOW to create a declarator that acts like class. Here's the first:

            ...

            ANSWER

            Answered 2021-Dec-13 at 23:18

            The EXPORTHOW mechanism is only for overriding the metaclass that will be used for package declarators, with the slight extension that EXPORTHOW::DECLARE also performs a grammar tweak that introduces a new package declarator.

            While one can call .HOW on a Sub, the result does not relate to the subroutine itself, but rather the metaclass of the Sub type, of which a subroutine is an instance.

            Really, EXPORTHOW is an "easy things easy" mechanism (to the degree it's fair to call anything relating to meta-programming easy!) It was also a straightforward thing to provide: the parsing of package declarations was already extremely regular, and the compiler already maintained a mapping table from package keyword to metaclass, so providing a way for a module to replace entries in that table (or add new ones for DECLARE) was barely a few hours of compiler hackery.

            Routines are vastly less regular, even if that's only somewhat apparent syntactically. While packages pretty much parse the keyword (class, role, grammar, etc.) and what follows is the very same syntax and semantics for all of them (modulo roles permitting a signature), there are separate parse rules and semantics behind each of sub, method, macro, and rule. Their interaction with the overall compilation process is also rather more involved. The ongoing RakuAST effort is bringing a bit more order to that chaos, and ultimately - when coupled with slangs - will offer a way to introduce new sub-like constructs, as well as to give them semantics.

            Source https://stackoverflow.com/questions/70338112

            QUESTION

            jQuery: How to set max height of 3 'h3' element under a specific DIV to all h3 element?
            Asked 2021-Nov-18 at 15:16

            The code snippet below is a part of a WordPress page being developed. I need to set heights of all the 4 h3 elements to the highest of them using jQuery. Could anyone please help me fix the jQuery function below to do this?

            ...

            ANSWER

            Answered 2021-Nov-17 at 17:07

            This could be achieved using CSS and flexbox styling if they are contained within the same container.

            If flexbox isn't possible due to the layout, for example h3 tags in different containers and unable to apply flexbox styles, Id take a look at using:

            https://github.com/liabru/jquery-match-height

            Source https://stackoverflow.com/questions/69999578

            QUESTION

            Woocommerce admin_notices does not work when woocommerce_order_status_changed hook fires
            Asked 2021-Nov-06 at 15:39

            I'm new to WordPress development and I'm currently encountering a dead-end.

            I want an admin notice to be displayed in a WooCommerce order after the order's status has been changed.

            With the following code, the notice doesn't appear:

            ...

            ANSWER

            Answered 2021-Nov-06 at 15:39

            Good question. It got me curious and made me dig into this WC_Admin_Notices class. And here's what I found out!

            Well, before I talk about WC_Admin_Notices class, first let's talk about your first question!

            "the notice doesn't appear"

            Because when the woocommerce_order_status_changed hook fires there is no screen associated with it and it's not just notices, for example if you try to do a print_r and/or an echo they won't show anything either because there is no screen associated with that hook. The only way you could find out that you hit that hook is by using die function. In order to test this, you could do this:

            Source https://stackoverflow.com/questions/69857967

            QUESTION

            Wordpress site hacked -- redirects to another site
            Asked 2021-Sep-26 at 22:34

            My Wordpress site has been hacked. Links on the site have been changed to take users to the hacker's site at storage.piterreceiver.ga. This site, in turn, redirects to other sites which my browser flags as dangerous.

            Has anyone else had this happen? How can a restore my site and prevent a reoccurrence?

            ...

            ANSWER

            Answered 2021-Sep-23 at 16:14

            I recommend to rewrite affected files by the files from clean/original Wordpress (be sure you using the same version of the WP)

            Source https://stackoverflow.com/questions/69302385

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install WordPress

            You can download it from GitHub.
            PHP requires the Visual C runtime (CRT). The Microsoft Visual C++ Redistributable for Visual Studio 2019 is suitable for all these PHP versions, see visualstudio.microsoft.com. You MUST download the x86 CRT for PHP x86 builds and the x64 CRT for PHP x64 builds. The CRT installer supports the /quiet and /norestart command-line switches, so you can also script it.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/pantheon-systems/WordPress.git

          • CLI

            gh repo clone pantheon-systems/WordPress

          • sshUrl

            git@github.com:pantheon-systems/WordPress.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Consider Popular Content Management System Libraries

            Try Top Libraries by pantheon-systems

            terminus

            by pantheon-systemsPHP

            wp-redis

            by pantheon-systemsPHP

            documentation

            by pantheon-systemsJavaScript

            autotag

            by pantheon-systemsGo

            wp-native-php-sessions

            by pantheon-systemsPHP