suzieq | Using network observability to operate and design | Networking library

 by   netenglabs Python Version: 0.22.0rc1 License: Apache-2.0

kandi X-RAY | suzieq Summary

kandi X-RAY | suzieq Summary

suzieq is a Python library typically used in Networking applications. suzieq has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. However suzieq build file is not available. You can install using 'pip install suzieq' or download it from GitHub, PyPI.

Would you like to be able to easily answer trivial questions such as how many unique prefixes are there in your routing table, or how many MAC addresses are there in the MAC tables across the network? How about more difficult questions, such as what changes did your routing table see between 10 pm and midnight last night, or which of your nodes have been up the longest, or which BGP sessions have had the most routing updates? How about being able to answer if your OSPF (or BGP) sessions are working correctly, or is all well with your EVPN? How about a quick way to determine the amount of ECMP at every hop between two endpoints? Do you wish you could easily validate the configuration you deployed across your network?. Do you login to every network node you have to figure out answers to a questions like these? Do you then struggle to piece the information together into a consistent whole across the various formats provided by various vendors? Do you wish you had an open source, multi-vendor tool that could help you answer questions like these and more?. If you answered yes to one or more of these questions, then Suzieq is a tool that we think will be interesting to you. Suzieq helps you find things in your network. Suzieq is both a framework and an application using that framework, that is focused on improving the observability of your network. We define observability as the ability of a system to answer either trivial or complex questions that you pose as you go about operating your network. How easily you can answer your questions is a measure of how good the system's observability is. A good observable system goes well beyond monitoring and alerting. Suzieq is primarily meant for use by network engineers and designers. Suzieq does multiple things. It collects data from devices and systems across your network. It normalizes the data and then stores it in a vendor independent way. Then it allows analysis of that data. With the applications that we build on top of the framework we want to demonstrate a different and more systematic approach to thinking about networks. We want to show how useful it is to think of your network holistically.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              suzieq has a low active ecosystem.
              It has 658 star(s) with 85 fork(s). There are 30 watchers for this library.
              There were 1 major release(s) in the last 6 months.
              There are 95 open issues and 407 have been closed. On average issues are closed in 170 days. There are 11 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of suzieq is 0.22.0rc1

            kandi-Quality Quality

              suzieq has 0 bugs and 0 code smells.

            kandi-Security Security

              suzieq has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              suzieq code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              suzieq is licensed under the Apache-2.0 License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              suzieq releases are available to install and integrate.
              Deployable package is available in PyPI.
              suzieq has no build file. You will be need to create the build yourself to build the component from source.
              Installation instructions are not available. Examples and code snippets are available.
              suzieq saves you 5883 person hours of effort in developing the same functionality from scratch.
              It has 32249 lines of code, 1299 functions and 324 files.
              It has high code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi has reviewed suzieq and discovered the below as its top functions. This is intended to give you an instant insight into suzieq implemented functionality, and help decide if they suit your requirements.
            • Extract consrecs from a json template
            • Cleans up the result of cleanup
            • Return num_eval
            • Copy keys into a single element
            • Clean the junos data
            • Return the missing value for an entry
            • Assign a vrf entry to entry_dict
            • Return the missing state field
            • Run the service
            • Extracts values from a json template
            • Retrieve data from the view
            • Clean data from junos data
            • Returns a pandas dataframe
            • Summarize and return a summary table
            • Parse the device type and hostname
            • Return a pandas DataFrame
            • Start the worker threads
            • Fetch data from the table
            • Get a list of properties
            • Create avro schema
            • Clean EOS data
            • Entry point for suzieq
            • Clean the eos data
            • Returns a pandas DataFrame of ospf results
            • Cleans NxOS data
            • Normalize NXOS text
            • Collapse a resource table
            Get all kandi verified functions for this library.

            suzieq Key Features

            No Key Features are available at this moment for suzieq.

            suzieq Examples and Code Snippets

            No Code Snippets are available at this moment for suzieq.

            Community Discussions

            QUESTION

            Multicast being sent over hardware address of default gateway address instead of ethernet multicast address
            Asked 2022-Mar-10 at 14:07

            I have this code to send multicast messages to a group. There are no errors while running the program but when I monitor packets in Wireshark the ethernet destination of my packets are of my default gateway instead of something like 01-00-5e-xx-xx-xx

            The code:

            ...

            ANSWER

            Answered 2022-Mar-10 at 14:07

            244.244.244.1 is not a valid multicast address.

            Multicast address are in the range of 224.0.0.1 - 239.255.255.255. The address you're sending to is not in that range. So the outgoing MAC address is not a multicast MAC.

            Change the destination IP to be in the range of multicast IP addresses and you'll see a proper multicast MAC address.

            Source https://stackoverflow.com/questions/71419150

            QUESTION

            How to extract street graph or network from OpenStreetMap?
            Asked 2022-Feb-17 at 16:03

            How to extract street graph or network from OpenStreetMap ?

            ...

            ANSWER

            Answered 2022-Feb-17 at 15:56
            Solutions:

            There are many solutions to achieve this goal, I listed some of them below.

            - Overpass-api

            Overpass-api & overpass-turbo let you use overpass query language to collect ways and nodes of type highway for a city :

            Source https://stackoverflow.com/questions/69174361

            QUESTION

            Julia - not able to capture looped back UDP packets in Wireshark
            Asked 2022-Jan-14 at 08:46

            I have a UDP sender program here:

            ...

            ANSWER

            Answered 2022-Jan-14 at 08:46

            When I tried to change the destination ip address to 255.255.255.255 [broadcasting?]

            Source https://stackoverflow.com/questions/70694929

            QUESTION

            In a vscode development container, is there a way to access the docker container from a different machine on the local network?
            Asked 2022-Jan-01 at 05:35

            I have an app (sveltekit) running inside and would like to access it from other devices on my local network.

            I can access it normally from the host machine on localhost:3000.

            I want to access it somehow from another machine on the local network. Is this possible? Sveltekit cli has --host flag, which outputs the following:

            ...

            ANSWER

            Answered 2022-Jan-01 at 05:35

            All that was needed was to change the following VSCode setting. By default it was set to "localhost". Setting it to "allInterfaces" grants access to other devices on the local network.

            Source https://stackoverflow.com/questions/70523216

            QUESTION

            Floating IPs usage on Digital Ocean
            Asked 2021-Nov-27 at 00:12

            I am looking for a basic thing yet I have not found not even a single good documentation on getting it done.

            I want to allocate a floating IP, then associate it to a network interface of a droplet other than eth0. The reason is I want to have the ability to very easily switch from one IP to the other with a programming language.

            In a few words, I want to be able to do these two commands and both should provide a different response.

            ...

            ANSWER

            Answered 2021-Nov-27 at 00:12

            In the cloud (AWS. GCP etc.) ARP is emulated by the virtual network layer, meaning that only IPs assigned to VMs by the cloud platform can be resolved. Most of the L2 failover protocols do break for that reason. Even if ARP worked,the IP allocation process for these IPs (often called “floating IPs”) would not integrate with the virtual network in a standard way, so your OS can't just "grab" the IP using ARP and route the packets to itself.

            I have not personally done this on Digital Ocean, but I assume that you can call the cloud's proprietary API to do this functionality if you would like to go this route.

            See this link on GCP about floating IPs and their implementation. Hope this is helpful.

            Here's an idea that needs to be tested:

            • Let's say you have Node1(10.1.1.1/24) and Node2(10.1.1.2/24)
            • Create a loopback interface on both VMs and set the same IP address for both like (10.2.1.1/32)
            • Start a heartbeat send/receive between them
            • When NodeA starts it automatically makes an API call to create a route for 10.2.1.1/32 and points to itself with preference 2
            • When NodeB starts it automatically makes an API call to create a route for 10.2.1.1/32 and points to itself with preference 1
            • The nodes could monitor each other to withdraw the static routes if the other fails. Ideally you would need a 3rd node to reach quorum and prevent split brain scenarios, but you get the idea right?

            Source https://stackoverflow.com/questions/69919561

            QUESTION

            How to create an edgelist from a dataframe (expand, group_by?)
            Asked 2021-Oct-23 at 14:32

            I have a dataframe in R similar to the following:

            ...

            ANSWER

            Answered 2021-Sep-14 at 04:44

            I really love a base R solution, so that's what you'll get from me. It's a bit hacky and ad hoc but it seems to get the job done pretty quickly.

            Source https://stackoverflow.com/questions/69171494

            QUESTION

            Ubuntu16 LetsEncrypt R3 issue
            Asked 2021-Sep-30 at 22:32

            I've been trying to wrap my head around this issue all day, could someone help resolve or at least explain it as if I'm a child?

            I have an Ubuntu 16 server, running openssl 1.1, & letsencrypt

            R3 support expired last night and now an application doesn't work on all devices because it's intermediate signature is from R3 ?

            I've removed the X3 from my cert chain providers and generated fresh SSLs with letsencrypt but it has not solved the issue.

            ...

            ANSWER

            Answered 2021-Sep-30 at 22:32

            Okay, what I did was to use this config in getssl.cfg

            Source https://stackoverflow.com/questions/69394817

            QUESTION

            Updated windows docker and now it doesn't work outside localhost
            Asked 2021-Sep-23 at 10:38

            I have been running a media cluster for sometime without any issues. I have everything networked into two different docker networks... the first network just bridges the docker instance to the local machine, the second network is a docker VPN container that I use for the other media services (an earlier version of what I am working on can be found here: https://github.com/Xander-Rudolph/MediaDocker)

            The strangest thing happened today though. I ran the docker update for windows and now docker spools up without any errors or issues, however none of the services work outside of the machine running docker. Usually I have a poke through for a couple of the services in my router (namely wordpress/joomla which is on the bridge) and they work outside of my local network, but none of them are working anymore. I was able to confirm its not the DNS A record because I'm able to use the RDP ports I have mapped for my router, and when I test on another machine in the same network, it can't access the services via the internal IP (but it can RDP).

            Anyone have any idea what could have changed to break this? I've already updated all my docker images and even rebuilt my VPN container (before I realized its a networking issue). What are some steps I can do to try to troubleshoot what is going wrong in docker to prevent access outside of localhost?

            Update

            I've been able to rule out the docker update as the root cause... I upgraded docker on my laptop (which was previously running the same version as my desktop) and its not having the same issue... this configuration must be localized to this desktop... No idea what the issue is... Will try a linux VM on the desktop instead of docker for windows...

            Update 2

            After a lot of screwing around in both a VM and in WSL, I'm still only able to access the docker services from localhost but not a different machine on my network or via the IP on the host machine (perhaps something similar to this: Can't access localhost via IP address). RDP does work so the computer is accessible but the services are not.

            I'm not sure if this is a result of a docker networking config or a windows network config (I'm using WSL with docker installed on ubuntu 20.08) but I'm not seeing anything stick out. I'm going to remove the tag for docker windows but this is definitely an issue with networking and I suspect it has something to do with the fact that the containers are running behind a VPN... although I don't know why I would be able to access them on localhost but not the IP on another VM...

            When I run

            ...

            ANSWER

            Answered 2021-Sep-21 at 02:43

            Your question: "...What are some steps I can do to try to troubleshoot what is going wrong in docker to prevent access outside of localhost?..."

            Troubleshooting help for you, first do you have multiple networking adapters (Ethernet, Wi-Fi, etc.) present on the host. First ensure, the priority of these adapters needs to be configured in correct order so the Windows networking stack can correctly choose gateway routes.

            Now, to fix this set your primary internet-connected networking adapter to have the lowest InterfaceMetric value, use can use these Powershell commands from an elevated console:

            Source https://stackoverflow.com/questions/69111163

            QUESTION

            Networked aframe dynamic rooms not working with easy rtc
            Asked 2021-Sep-17 at 15:17
            Issue

            Hi, I've remixed a template for networked aframe dynamic rooms using a form:

            https://glitch.com/edit/#!/power-lily-pancake?path=public%2Fscene.html%3A41%3A0

            For some reason whenever I add these lines of code to the tag, the entire project breaks:

            ...

            ANSWER

            Answered 2021-Sep-17 at 15:17

            afaik the dynamic-room component is designed to attach the networked-scene, not update it (since it doesn't handle updates). That's why the dynamic-room example scene does only have a dynamic-room component, and also why the dynamic-room is not working with networked-scene.

            I'd throw all the networked-scene attributes to the dynamic-room setup, but it's also possible to make the two work together pretty much like you want it:

            Source https://stackoverflow.com/questions/69138587

            QUESTION

            Return a list of mutual nodes between every pair of nodes in R
            Asked 2021-Sep-10 at 20:25

            I want to obtain a list of mutually connected nodes between every pair of nodes in my graph:

            ...

            ANSWER

            Answered 2021-Sep-10 at 19:00

            This is not exactly efficient, it's a brute force double loop, but you can do

            Source https://stackoverflow.com/questions/69127621

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install suzieq

            You can install using 'pip install suzieq' or download it from GitHub, PyPI.
            You can use suzieq like any standard Python library. You will need to make sure that you have a development environment consisting of a Python distribution including header files, a compiler, pip, and git installed. Make sure that your pip, setuptools, and wheel are up to date. When using pip it is generally recommended to install packages in a virtual environment to avoid changes to the system.

            Support

            We've done some blogging about Suzieq:. We've also been adding screencasts on Youtube.
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            Install
          • PyPI

            pip install suzieq

          • CLONE
          • HTTPS

            https://github.com/netenglabs/suzieq.git

          • CLI

            gh repo clone netenglabs/suzieq

          • sshUrl

            git@github.com:netenglabs/suzieq.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Explore Related Topics

            Consider Popular Networking Libraries

            Moya

            by Moya

            diaspora

            by diaspora

            kcptun

            by xtaci

            cilium

            by cilium

            kcp

            by skywind3000

            Try Top Libraries by netenglabs

            bgperf2

            by netenglabsPython

            automatic-for-the-people

            by netenglabsRuby

            nubia-cli

            by netenglabsPython

            nubia

            by netenglabsPython