image_processing | High-level image processing wrapper for libvips | Computer Vision library

 by   janko Ruby Version: v1.12.2 License: MIT

kandi X-RAY | image_processing Summary

kandi X-RAY | image_processing Summary

image_processing is a Ruby library typically used in Artificial Intelligence, Computer Vision applications. image_processing has no bugs, it has a Permissive License and it has medium support. However image_processing has 1 vulnerabilities. You can download it from GitHub.

High-level image processing wrapper for libvips and ImageMagick/GraphicsMagick
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              image_processing has a medium active ecosystem.
              It has 780 star(s) with 67 fork(s). There are 21 watchers for this library.
              OutlinedDot
              It had no major release in the last 6 months.
              There are 11 open issues and 74 have been closed. On average issues are closed in 75 days. There are 1 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of image_processing is v1.12.2

            kandi-Quality Quality

              image_processing has 0 bugs and 0 code smells.

            kandi-Security Security

              OutlinedDot
              image_processing has 1 vulnerability issues reported (1 critical, 0 high, 0 medium, 0 low).
              image_processing code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              image_processing is licensed under the MIT License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              image_processing releases are not available. You will need to build from source code and install.
              Installation instructions, examples and code snippets are available.
              image_processing saves you 612 person hours of effort in developing the same functionality from scratch.
              It has 1425 lines of code, 59 functions and 13 files.
              It has high code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi has reviewed image_processing and discovered the below as its top functions. This is intended to give you an instant insight into image_processing implemented functionality, and help decide if they suit your requirements.
            • Merges a new builder with the given options .
            • Apply the given operator to a new operation .
            • Create a new temp file .
            • Returns the source of the source
            • Applies an operation to the given method .
            • Call the processor .
            • Create a new branch
            • Deletes a destination file if it exists
            • Determines if the destination format provided .
            • Initialize instrumentation
            Get all kandi verified functions for this library.

            image_processing Key Features

            No Key Features are available at this moment for image_processing.

            image_processing Examples and Code Snippets

            Construct an exponential power convolution kernel .
            pythondot img1Lines of Code : 110dot img1License : Non-SPDX (Apache License 2.0)
            copy iconCopy
            def exponential_power_convolution_kernel(
                grid_shape,
                length_scale,
                power=None,
                divisor=None,
                zero_inflation=None,
            ):
              """Make an exponentiated convolution kernel.
            
              In signal processing, a [kernel]
              (https://en.wikipedia.org/w  

            Community Discussions

            QUESTION

            updating to rails 6, but "activerecord-session_store (~> 2.0) was resolved to 2.0.0, which depends on actionpack (>= 5.2.4.1)"
            Asked 2021-Jun-14 at 23:35

            I ran bundle update rails and got this. I'm stumped. If activerecord-session_store 2.0 depends on a version of actionpack between 5.2.4.1 and above, and if actionpack is a dependency of Rails 6, shouldn't this be ok?

            ...

            ANSWER

            Answered 2021-Jun-14 at 23:35

            Hmm; if I try bundle install with your Gemfile I get

            Source https://stackoverflow.com/questions/67977850

            QUESTION

            Bundler::GemNotFound: Could not find mimemagic-0.3.5 in any of the sources on Rails project with Docker
            Asked 2021-Jun-10 at 00:24

            I'm aware of the recent mimemagic issues, which I managed to resolve on one of my Rails projects by bundle updating to 0.3.7 - but for some reason, I can't resolve it on the project below.

            I have a Rails 6 project which I'm setting up for the first time on a new laptop. My laptop doesn't have the correct Ruby setup, so I've added a Dockerfile to my project like so:-

            Dockerfile

            ...

            ANSWER

            Answered 2021-Mar-28 at 23:41
            bundle update --conservative mimemagic 
            

            Source https://stackoverflow.com/questions/66844316

            QUESTION

            Ruby on Rails 'pg' gem installation error Windows 10
            Asked 2021-Jun-01 at 01:05

            does anyone know why the error

            "ERROR: While executing gem ... (Errno::EACCES)

            Permission denied @ rb_sysopen - C:/Ruby27-x64/lib/ruby/gems/2.7.0/gems/pg-1.2.3-x64-mingw32/lib/2.7/pg_ext.so"

            appears while trying to install pg gem in Windows 10?
            I tried running gem install pg with admin privileges in command prompt in my application folder, but it throws this error.. I also checked out site https://rubygems.org/gems/pg and there copied how to install pg via command line, and what to include in Gemfile.
            Here is my gem file:

            ...

            ANSWER

            Answered 2021-Jun-01 at 01:05

            I'm assuming you've downloaded and installed PostgreSQL on your system. Use the following to point the gem to where postgres is installed. This is an example of what it'd look like on my system.

            Source https://stackoverflow.com/questions/67774112

            QUESTION

            Why the corners detected by Fast algorithm in OPENCV and my own implementation are not same?
            Asked 2021-Apr-28 at 13:29

            I have implemented a naive FAST corner detector using C++ boost algorithm. Currently it does not have non max suppression. I ran my implementation and the OPENCV implementation on this photo below

            The output of OPENCV is

            The output from my implementation is

            Here is my code

            ...

            ANSWER

            Answered 2021-Apr-28 at 13:29

            I can't compile your code. I can only spot a few random things, that might help you fix things:

            1. Your threshold_indicator array is sixteen elements, but your loops go to index 24 This will lead to Undefined Behaviour (unless the loop incidentally breaks before that point)

            2. valid_points_count is unused, yet it is being initialized to a magic number

            3. You can reduce a lot of code by not repeating yourself quite as much. E.g your code for the following bit took 45 lines of code. That's >4x as much.

            Source https://stackoverflow.com/questions/67297999

            QUESTION

            How do I avoid bootsnap and railties to cause this error?
            Asked 2021-Apr-17 at 17:00

            ----UPDATE

            I have cloned the repo in an other directory and went throw the all process again, this time though I noticed that the issue comes out only after using:

            ...

            ANSWER

            Answered 2021-Apr-17 at 17:00

            Your error is in the last line;

            /var/www/swan/code/vendor/bundle/ruby/2.6.0/gems/bootsnap-1.7.3/lib/bootsnap/load_path_cache/core_ext/kernel_require.rb:23:in `require': cannot load such file -- listen (LoadError)

            bundle install --deployment --without development test command install only production and general gems. Does not install the development or test gems. Rails read environment variables RAILS_ENV for the setting environment. RAILS_ENV variable if not set rails default accept development. And bundler try to load all gems + development group gems. But bundle install --deployment --without development test command only install production and general gems. So listen gem is not installed because listen gem in development group. RAILS_ENV=production bin/rails c command not throw error because not try to load development gems.

            Source https://stackoverflow.com/questions/67138315

            QUESTION

            cannot load such file -- webrick/httputils
            Asked 2021-Apr-11 at 17:37

            I have a project I'm trying to use ruby 3 (previously running with 2.7.2), but couldn't accomplish it.

            After updated my gemfile with the ruby version and ran bundle, I'm receiving this error when trying to access rails c:

            ...

            ANSWER

            Answered 2021-Jan-08 at 00:14

            You have spring in your gemfile, usually hanging consoles and servers are related to that. The webrick gem was removed from the standard library in Ruby 3, so that's why it needs to be included in your Gemfile.

            Re-add webrick to your Gemfile, do a bundle install, and then stop the background spring server with bin/spring stop. Then re-run the server.

            Your best bet on solving issues with spring would be to head over and read about the gem on the GitHub project page, or opening a new question here on SO.

            Source https://stackoverflow.com/questions/65617143

            QUESTION

            why these two character arrays won't concatenate properly?(C Programming)
            Asked 2021-Apr-09 at 20:26
            char *program_working_dir;
            char backup_dir[9]="/Backups/";
            
            // getting the current working directory
            program_working_dir = getcwd(NULL, 0);
            if (program_working_dir == NULL){
                printf("Failed to get working directory( take_backup function )\n");
                return -1;
            }
            
            // allocate memory for full path that contain the current directory and the /Backups/
            char *full_backup_dir = (char *)malloc( (strlen(program_working_dir) + strlen(backup_dir) + 1 ) * sizeof(uint8_t) );
            if (full_backup_dir == NULL){
                printf("Failed to allocate proper memory to stor full path of backup directory\n");
                return -1;
            }
            
            // used for debugging purposes
            printf("program working dir%s\n", program_working_dir); // (here : /home/ramixix/Documents/3_grade/2th_Semester/image_processing/Project/image_processing/)
            printf("%d\n",  strlen(program_working_dir));  // ( 86 length of program_working_dir )
            
            // try to concatenate the tow string using snprintf. I add 1 to size for '\0' terminate string
            snprintf(full_backup_dir, ( strlen(program_working_dir) + strlen(backup_dir) +1  ) * sizeof(uint8_t)  , "%s%s", program_working_dir, backup_dir);
            printf("Full path: %s\n", full_backup_dir);
            
            ...

            ANSWER

            Answered 2021-Apr-09 at 20:26

            QUESTION

            Why does Ruby version 2.7.1p83 and rails 6.0.3.5 says config.action_dispatch is nil in the following ApplicationController code?
            Asked 2021-Mar-28 at 16:53

            Why does Ruby version 2.7.1p83 and rails 6.0.3.5 says config.action_dispatch is nil in the following ApplicationController code?

            ...

            ANSWER

            Answered 2021-Mar-28 at 15:53

            Default headers can be configured in config/application.rb. Trying moving your code out of ApplicationController and into config/application.rb. That's where you'll have access to the config object.

            If you need to set custom headers within the context of a controller, you can use response.headers.

            Source https://stackoverflow.com/questions/66842752

            QUESTION

            Rails 6 image upload to digitalocean spaces
            Asked 2021-Mar-12 at 18:45

            I have a blog that uploads banner and thumbnail images. I originally had it set to upload to the local directory using the carrierwave gem and I wanted to try to use digitalocean spaces since the app is deployed to the digitalocean app platform. I am able to get it working on localhost:3000 but when I deploy it to digitalocean it keeps reverting back to a previous deployment saying that a health check failed but not real errors.

            I decided to deploy it to heroku since I am able to get actual errors. Here is the current error I get from heroku:

            ...

            ANSWER

            Answered 2021-Mar-12 at 18:45

            It seems like the server can't access to the content of the credentials.yml. This file is encrypted and Rails use the master key store in the master.key file to read it. So given that the master.key is not checked into version control, you need to provide it manually on the server. Please check this article https://medium.com/cedarcode/rails-5-2-credentials-9b3324851336

            This section :

            Deploying master key

            When you move your code to a server, you need to make sure that your config/credentials.yml.enc file can be decrypted. That means that somehow you’ll need to provide Rails with your master key, given that it is not checked into version control.

            There are two ways of doing that:

            Option 1: Place the config/master.key file in the server. You’ll normally want to symlink this file to a shared folder in the server filesystem. Again, do not version your config/master.key file.

            Option 2: create a RAILS_MASTER_KEY ENV variable. Rails will detect it and use it as your master key, e.g. in heroku: heroku config:set RAILS_MASTER_KEY=.

            You should be able to use any of those indistinctly.

            If you are using RBENV as you ruby manager, you can store your env var doing this :

            You will create .rbenv-vars in your project folder, not your rails project folder but the folder in which is your project folder, the parent folder if you want.

            After that you put your env var inside the file like this:

            DATABASE_PWD=*****

            no quotes, no space too before ou after the "="

            For more check this link on goRails : https://gorails.com/deploy/ubuntu/18.04#capistrano

            Hope this can help

            Source https://stackoverflow.com/questions/66555977

            QUESTION

            Rails Heroku deployment issue
            Asked 2021-Feb-22 at 13:18
            The issue in general:

            I am trying to upload a simple Rails application to Heroku, but I keep getting this error:

            My Gemfile:

            ...

            ANSWER

            Answered 2021-Feb-22 at 13:18

            Basically, your Bundler version is not compatible with Heroku and not properly supported yet.

            Delete your Gemfile.lock file then do this on your terminal to revert to an older version of Bundler:

            Source https://stackoverflow.com/questions/66284434

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install image_processing

            Install ImageMagick and/or libvips:
            Add the gem to your Gemfile:

            Support

            Our test suite requires both imagemagick and libvips libraries to be installed. Afterwards you can run tests with.
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/janko/image_processing.git

          • CLI

            gh repo clone janko/image_processing

          • sshUrl

            git@github.com:janko/image_processing.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link