tunnels | https ---- http | Proxy library

 by   jugyo Ruby Version: Current License: No License

kandi X-RAY | tunnels Summary

kandi X-RAY | tunnels Summary

tunnels is a Ruby library typically used in Networking, Proxy applications. tunnels has no bugs, it has no vulnerabilities and it has low support. You can download it from GitHub.

Tunnels is a proxy to http from https.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              tunnels has a low active ecosystem.
              It has 372 star(s) with 36 fork(s). There are 5 watchers for this library.
              OutlinedDot
              It had no major release in the last 6 months.
              There are 4 open issues and 3 have been closed. On average issues are closed in 2 days. There are 1 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of tunnels is current.

            kandi-Quality Quality

              tunnels has 0 bugs and 0 code smells.

            kandi-Security Security

              tunnels has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              tunnels code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              tunnels does not have a standard license declared.
              Check the repository for any license declaration and review the terms closely.
              OutlinedDot
              Without a license, all rights are reserved, and you cannot use the library in your applications.

            kandi-Reuse Reuse

              tunnels releases are not available. You will need to build from source code and install.
              Installation instructions are not available. Examples and code snippets are available.
              tunnels saves you 42 person hours of effort in developing the same functionality from scratch.
              It has 113 lines of code, 17 functions and 4 files.
              It has medium code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi has reviewed tunnels and discovered the below as its top functions. This is intended to give you an instant insight into tunnels implemented functionality, and help decide if they suit your requirements.
            • Receives the forwarded header .
            • Disconnects from the client
            • Redirect to the client .
            • Initialize a connection
            Get all kandi verified functions for this library.

            tunnels Key Features

            No Key Features are available at this moment for tunnels.

            tunnels Examples and Code Snippets

            List of all tunnels that are exits .
            pythondot img1Lines of Code : 4dot img1License : Permissive (MIT License)
            copy iconCopy
            def exits(self):
                    return [direction for direction, cave 
                                  in list(self.tunnels.items())
                                  if cave is not None]  
            Returns a list of tunnels that can be tunneled .
            pythondot img2Lines of Code : 3dot img2License : Permissive (MIT License)
            copy iconCopy
            def can_tunnel_to(self):
                    return [v for v in list(self.tunnels.values())
                            if v is None] != []  

            Community Discussions

            QUESTION

            Raspi4 WIFI-Access-Point Full-Tunnel directly into Wireguard
            Asked 2021-May-31 at 14:56

            I run a working Wireguard server with 2 Wireguard Gateways for Site-to-Site VPN and a couple of Mobile Devices with a Full Tunnel that are used occasionally. One of my Site Gateways is a RaspberryPi4 that I want to provide a WIFI-Access-Point that directly tunnels to the Wireguard Server. This RaspberryPi has working access to all connected subnets via the main Server, so Wireguard is setup properly.

            I want to use my Raspi4 to roam the world and provide me a WIFI-Access-Point while any device that connects to it is directly routed into Wireguard and emerges to the web only from there. I used the standard gateway setup provided and my WIFI device can access the web but doesn't tunnel through Wireguard (yet).

            I can't really find where I can configure where the access point is bound to, dnsmasq, apdconf or a simply iptables rule?

            Example IPs

            Server: 10.0.7.1, local network 192.168.0.1/24

            Raspi4: 10.0.7.5, local network 192.168.6.5/24, WIFI 192.168.7.5/24

            So far I haven't succeeded, ideas?

            ...

            ANSWER

            Answered 2021-May-31 at 14:56

            Got it to work, took a few steps.

            First I changed the Wireguard-tunnel on the RP4 to be a full tunnel, it was previously a split-tunnel, only routing the IPs of the other local LANs into the wg0 interface.

            Working Full Tunnel:

            Source https://stackoverflow.com/questions/67765893

            QUESTION

            PowerShell 2.0 script to extract json data
            Asked 2021-Mar-21 at 08:56

            UPDATE - The Solution was very simple with Powershell 5.1. I posted an answer separately"

            I am attempting my first Powershell script (version 2.0 in Windows 7). I am reading the following json text from a file (that part works). I want to get the value of "public_url". The error I'm getting with the script below is"

            ...

            ANSWER

            Answered 2021-Mar-21 at 08:34

            Continuing from my comments. Just upgrade to the latest WinPS use the JSON cmdlets, don't try and reinvent the wheel.

            Windows Management Framework 5.1

            https://www.microsoft.com/en-us/download/details.aspx?id=54616

            Windows Management Framework 5.1 includes updates to Windows PowerShell, Windows PowerShell Desired State Configuration (DSC), Windows Remote Management (WinRM), Windows Management Instrumentation (WMI). Release notes: https://go.microsoft.com/fwlink/?linkid=839460

            Source https://stackoverflow.com/questions/66729447

            QUESTION

            How to start multiple ssh-session from a bash script
            Asked 2021-Mar-19 at 12:59

            Beeing in home office, i need to start every morning some ssh-tunnels to my company to get my inhouse workplace applications websites via portforwarding to my desktop. Every ssh call is inside his own script and every ssh-tunnel need a keyphrase to unlock the ssh-key needed for that connection.

            I#m bored of manually starting every morning those scripts (which starts the ssh-tunnels) and would like to start them all at one and typing in only one time the keyphrase.

            like

            ...

            ANSWER

            Answered 2021-Mar-19 at 09:01

            As it is mentioned in this Q/A will be better to use -f instead of &.

            And also before start the script start ssh-agent to create passwordless start of ssh

            Source https://stackoverflow.com/questions/66704919

            QUESTION

            What is GCP equivalent of DNS Server Configuration for a Virtual Network on Microsoft Azure?
            Asked 2021-Mar-08 at 23:27

            I want my virtual machines that takes place in a VPC network on GCP be able to resolve my on-premise network DNS server records like *.mycompany.com

            Now I can't nslookup for a DNS like example.mycompany.com, to be able to do this in the Azure, there is a configuration that you can set your DNS server for a specific virtual network, after that all resources in that virtual network uses that DNS server. Is there any idea that what's the GCP equivalent for DNS settings for a specific network?

            I need to do this on the GCP side. I followed this link on the GCP docs and tried to create private DNS zone for forwarding but tbh couldn't understand completely how it works. Because unlike Azure, it seems to a bit complicated to me.

            Note: For both Azure and GCP there are VPN tunnels between on-premise network and cloud.

            Thanks in advance.

            ...

            ANSWER

            Answered 2021-Mar-08 at 22:31

            The Google Cloud equivalent to Azure Custom DNS server is using a DNS Policy to enable an alternative name server.

            Source https://stackoverflow.com/questions/66537942

            QUESTION

            Hide secret in Terraform
            Asked 2021-Feb-03 at 14:41

            I am trying to create IPSEC tunnels on Palo Alto using Terraform. The code would the be pushed via a pipeline. I want all information of the tunnels to be readable, except for the pre_shared_key. I understand how I could encrypt it for one instance, but as there is going to be several tunnel, how can encrypt the key, and map it to its instance?

            vpns.yml:

            ...

            ANSWER

            Answered 2021-Feb-03 at 14:41

            Gruntwork's guide to managing secrets covers a lot of this so is probably worth reading through.

            Ideally you'd use an external secrets manager such as Hashicorp Vault or AWS SSM Parameter Store/Secrets Manager and generate the key using random_password, stashing it in your secret store with one side of the tunnel and then retrieving it from the secret store when applying the other side of the tunnel.

            If you intend to create both sides of the tunnel with a single terraform apply (eg you keep the configuration for both in the same directory) then you don't even need the secrets store and can just rely on the fact that the secret is only ever stored in Terraform state and never in your repo which only has the input of the random_password resource.

            In your case you'd have something like the following:

            Source https://stackoverflow.com/questions/66024506

            QUESTION

            Tunnel not found error Pyngrok streamlit collab
            Asked 2021-Feb-03 at 06:07

            I was developing an ui in streamlit and using pyngrok from Colab. everything was working fine till few days earlier the tunnel not found error started occurring. I am using below code. I have also upgraded pyngrok and tried but same problem persisted. Fairly new to the whole UI building and Colab pyngrok seemed most convenient way to learn. But now that this stopped working if anyone can suggest any other methods too or what am doing wrong that would be great

            ...

            ANSWER

            Answered 2021-Feb-03 at 06:07

            I am the developer of pyngrok, and I wanted to reach out to let you know that I've seen reports of this pop up on our issue tracker, several on here, on Colab's issue tracker, etc. a lot in the last week. I reached out to ngrok, as that appeared to be where the issue was, and they just got back to me. They confirmed that they had inadvertently started blocking connections to Colab recently, and they have now fixed this. I just tested this again myself as well, and sure enough, it's fixed!

            Source https://stackoverflow.com/questions/65966425

            QUESTION

            How to find control plane IP addresses for a regional GKE cluster
            Asked 2021-Feb-01 at 21:43

            I mistakenly deleted the firewall entry that allows the control plane nodes to establish ssh tunnels to the worker nodes. I need to recreate the firewall entry, but I can't find the IP addresses of the controller nodes.

            This is a regional cluster, so the cluster endpoint is a load balancer that sits in front of the 3 control plane IPs. I don't see that load balancer in my GCP console though, so I can't get its details.

            How do I find the IP addresses of the 3 control plane nodes in a GKE regional cluster?

            ...

            ANSWER

            Answered 2021-Jan-27 at 00:12

            As per the doc you can see the control plane CIDR block of GKE cluster. Use below gcloud command:

            Source https://stackoverflow.com/questions/65890067

            QUESTION

            GETTING ERROR Connection refused: connect for guacamole driven application
            Asked 2021-Feb-01 at 21:18

            Hello I am creating guacamole driven application and getting error java.net.ConnectException: Connection refused: connect. I tried the code given in guacamole web application documentation getting java.net.ConnectException: Connection refused: connect error

            servlet code

            ...

            ANSWER

            Answered 2021-Feb-01 at 21:18

            There is a configuration issue in the Java code. The GuacamoleConfiguration object should have the configuration of the target machine (windows) you are connecting to.

            In your case, you are using the RDP protocol, so the hostname should have the address of the Windows machine you want to connect to. The username and password for the target windows machine are mandatory when RDP protocol is used. If you are using a domain user, you should also specify the domain parameter.

            I believe the basis of your code is from the Guacamole example. This example explains how to connect to the VNC server, which does not require a username. In general, the basic configuration for connecting to windows should look like this:

            Source https://stackoverflow.com/questions/65993019

            QUESTION

            Error on starting the WildFly server (address already in use)
            Asked 2021-Jan-10 at 20:56

            I have a problem starting a wildfly app-server (wildfly-21.0.1) on a Solaris server (computer). I have read a lot of similar posts, but my problem seems to be different. First, I make an SSH-tunnel in PuTTY:

            My home machine is Windows, I connect to a remote Solaris server. I write the address of the server in a "Host name" field. After this I create an SSH tunnel on a port of the server (I tried different and rare ones), so I put the port of the server I am connecting to in "Source port" field and the port of my personal machine (localhost:port_number) in the "Destination". I have configured standalone.xml by changing on

            ...

            ANSWER

            Answered 2021-Jan-10 at 20:56

            The discussion with @AndrewHenle made me think of ports usage in a tunneling procedure so I changed "Remote" parameter in "Tunnels" section on "Local" (since the destination is localhost). All the other parameters and values were left the same. Now everything works correctly, and WildFly doesn't recognise 14384 as a taken port.

            Source https://stackoverflow.com/questions/65637582

            QUESTION

            TortiouseSVN connection to github.com using SSH
            Asked 2020-Dec-22 at 02:03

            I am trying to access my github.com repository using TortiouseSVN via SSH. Using HTTPS works fine, but the repository has grown so large that I am getting timeouts when doing updates.

            I have created the private/public key using git bash, registered it to github, and converted it to a private/public putty key.

            I added the key to Pageant Key list for automatic login.

            Putty configuration:
            Session Category:
            host name: git@github.com
            port: 22 (SSH)
            SessionName: github

            Connection/Data Category:
            Auto-login username:
            SSH/Auth
            Private key file is the putty converted .ppk file

            TortoiseSVN settings:
            Network:
            SSH Client:
            "C:\Program Files\TortoiseSVN\bin\TortoisePlink.exe"

            Connecting via putty connects and gives me this:
            Using username "git".
            Authenticating with public key "" from agent
            Server refused to allocate pty
            Hi ! You've successfully authenticated, but GitHub does not provide shell access.
            However, when try to "SVN Checkout" using TortiouseSVN in a folder. I get the following:
            URL Format: svn+ssh:///repo/repo.git/
            URL: svn+ssh://github/myname/online.git/

            Here are the results:
            Tortiouse SVN:
            Error: Unable to connect to a repository at url
            Error: svn+ssh://github//myname/online.git/
            Error: To better debug SSH connection problems, remove the -q option from 'ssh' in the
            Error: [tunnels] section of your Subversion configuration file.
            Error: Network connection closed unexpectedly

            Putty Log:
            Event Log: Looking up host "github.com" for SSH connection
            Event Log: Connecting to 140.82.113.3 port 22
            Event Log: We claim version: SSH-2.0-PuTTYTortoisePlink_Release_0.72
            Event Log: Remote version: SSH-2.0-babeld-78794f53
            Event Log: Using SSH protocol version 2
            Event Log: No GSSAPI security context available
            Event Log: Doing ECDH key exchange with curve Curve25519 and hash SHA-256 (unaccelerated)
            Event Log: Server also has ssh-dss host key, but we don't know it
            Event Log: Host key fingerprint is:
            Event Log: ssh-rsa 2048
            Event Log: Initialised AES-256 SDCTR (AES-NI accelerated) outbound encryption
            Event Log: Initialised HMAC-SHA-256 (unaccelerated) outbound MAC algorithm
            Event Log: Initialised AES-256 SDCTR (AES-NI accelerated) inbound encryption
            Event Log: Initialised HMAC-SHA-256 (unaccelerated) inbound MAC algorithm
            Event Log: Reading key file "path to .ppk file"
            Event Log: Pageant is running. Requesting keys.
            Event Log: Pageant has 1 SSH-2 keys
            Event Log: Pageant key #0 matches configured key file
            Event Log: Trying Pageant key #0
            Event Log: Sending Pageant's response
            Event Log: Access granted
            Event Log: Opening main session channel
            Event Log: Opened main channel
            Incoming packet #0x8, type 99 / 0x63 (SSH2_MSG_CHANNEL_SUCCESS)
            00000000 00 00 01 00 ....
            Incoming packet #0x9, type 95 / 0x5f (SSH2_MSG_CHANNEL_EXTENDED_DATA)
            00000000 00 00 01 00 00 00 00 01 00 00 00 be 49 6e 76 61 ............Inva
            00000010 6c 69 64 20 63 6f 6d 6d 61 6e 64 3a 20 27 73 76 lid command: 'sv
            00000020 6e 73 65 72 76 65 20 2d 74 27 0a 20 20 59 6f 75 nserve -t'. You
            00000030 20 61 70 70 65 61 72 20 74 6f 20 62 65 20 75 73 appear to be us
            00000040 69 6e 67 20 73 73 68 20 74 6f 20 63 6c 6f 6e 65 ing ssh to clone
            00000050 20 61 20 67 69 74 3a 2f 2f 20 55 52 4c 2e 0a 20 a git:// URL..
            00000060 20 4d 61 6b 65 20 73 75 72 65 20 79 6f 75 72 20 Make sure your
            00000070 63 6f 72 65 2e 67 69 74 50 72 6f 78 79 20 63 6f core.gitProxy co
            00000080 6e 66 69 67 20 6f 70 74 69 6f 6e 20 61 6e 64 20 nfig option and
            00000090 74 68 65 0a 20 20 47 49 54 5f 50 52 4f 58 59 5f the. GIT_PROXY_
            000000a0 43 4f 4d 4d 41 4e 44 20 65 6e 76 69 72 6f 6e 6d COMMAND environm
            000000b0 65 6e 74 20 76 61 72 69 61 62 6c 65 20 61 72 65 ent variable are
            000000c0 20 4e 4f 54 20 73 65 74 2e 0a NOT set..
            Incoming packet #0xa, type 98 / 0x62 (SSH2_MSG_CHANNEL_REQUEST)
            00000000 00 00 01 00 00 00 00 0b 65 78 69 74 2d 73 74 61 ........exit-sta
            00000010 74 75 73 00 00 00 00 01 tus.....
            Event Log: Started a shell/command
            Event Log: Session sent command exit status 1
            Event Log: Main session channel closed

            Thanks in advance

            ...

            ANSWER

            Answered 2020-Dec-22 at 02:03

            GitHub does not offer Subversion access over SSH. If you want to use a GitHub repository with Subversion, you need to use HTTPS. Otherwise, you can access the repository as a Git repository with either HTTPS or SSH.

            Source https://stackoverflow.com/questions/65401912

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install tunnels

            You can download it from GitHub.
            On a UNIX-like operating system, using your system’s package manager is easiest. However, the packaged Ruby version may not be the newest one. There is also an installer for Windows. Managers help you to switch between multiple Ruby versions on your system. Installers can be used to install a specific or multiple Ruby versions. Please refer ruby-lang.org for more information.

            Support

            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/jugyo/tunnels.git

          • CLI

            gh repo clone jugyo/tunnels

          • sshUrl

            git@github.com:jugyo/tunnels.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Explore Related Topics

            Consider Popular Proxy Libraries

            frp

            by fatedier

            shadowsocks-windows

            by shadowsocks

            v2ray-core

            by v2ray

            caddy

            by caddyserver

            XX-Net

            by XX-net

            Try Top Libraries by jugyo

            earthquake

            by jugyoRuby

            eeepub

            by jugyoRuby

            termtter

            by jugyoRuby

            rails-sh

            by jugyoRuby

            sunspot_mongoid

            by jugyoRuby