ArduCAM_USB_Camera_Shield | This is the repository for ArduCAM USB Camera Shield | Camera library

I wanted to install the OV7251 camera driver to work with a module I've recently purchased, the Arducam OV7251 MIPI, as I need to perform SLAM-like system called Virtual Inertial Navigation (VIN) and global shutter cameras are preferred for this. As far as my system goes, I'm using ROS Kinetic on an RPI-3B+ running Ubuntu 16.04 . I am using this camera as it is near my price point (<20$), and goes through the RPI's CSI Port, which sources say is easier and faster than ones going through USB.

I wanted to take this camera and publish its data to a topic, that way the repository I'm using for VIN, OpenVINS, can track the camera's position. Now, the camera that I'm using doesn't have much on it other than the manufacturer's github page, which does not work on Ubuntu, and cannot connect to ROS. Now, I'm decently inexperienced with RPI's, ROS included, since I wanted to originally perform this on an Arduino, but that was majorly impossible, so I doubt I would be able to write a simple ROS node, let alone one that connected with the CSI port.

Currently, I am unable to find many libraries for this, and help given to me has proved to be un-substantial. The camera does not natively have drivers supported on RPI, which is why I cannot find any /dev/video libraries, cheese turns up nothing, and the command $ Vcgencmd get_camera returns no detected devices. Someone suggested kernel hacking, in order to enable the module in menuconfig using libraries like the ones here. While I do not know much about kernel hacking, he reccomended that I follow this guide and after I run the defconfig line, I should search for "OV7251" in menuconfig and modularize the only one which popped up. And despite flashing and repeating this process multiple times to ensure I did not choose the wrong branch, the rpi-5.4.y branch, or wrong model, the RPI-3B+, I ended up being stuck on the rainbow screen after I rebooted every time. I know that the rainbow screen either means low power, which it wasn't because I had it run before, or a kernel error, which would most likely make sense.

Now, while I would most definitely like to fix the rainbow screen error, I would also like to know, how after installing the OV7251 driver, how do I get it working with ROS to send data to topics? Since I doubt I could write my own node, is there a library that I could look for to perform this, or would libraries that did not work previously due to a missing driver suddenly work now, or would I have to take an existing one and modify it? In any case, A more low-level tutorial to accomplish this would be quite handy seeing as I am new.

But, in the case this is not software, and the reason this camera is not supported is for good reason, is there any other cheap global shutter camera I can work with? I couldn't seem to find many over my various searches, but maybe you all have better luck/experience in this field. Although, I did manage to find another library by this same manufacturer which happens to support my camera model and even has a ROS node that works on ubuntu. However, I believe that if this can be done, then so can doing so by just the CSI port rather than buying an additional 40$ USB camera hat for the pi, and along with that, I am starting to doubt the validity of this companies repositories.

Yet the fact I am finding little information on the topic of this camera alone on the CSI port of an RPI and how renowned this company it scares me that it could be impossible, which if it is, do link me some other good and hopefully well-documented cameras, which could very well be a lot to ask for. And if it is just simply impossible to get the results I want with the parameters I have set, then how badly would a rolling shutter camera affect VIN'S performance, and furthermore is there any special dataset designed for rolling shutter which could minimize the drop in quality? This terrain is all too new to me.