esp8266_deauther | Affordable WiFi hacking platform | Wifi library

 by   SpacehuhnTech C Version: 2.6.1 License: Non-SPDX

kandi X-RAY | esp8266_deauther Summary

kandi X-RAY | esp8266_deauther Summary

esp8266_deauther is a C library typically used in Networking, Wifi, Arduino applications. esp8266_deauther has no bugs, it has no vulnerabilities and it has medium support. However esp8266_deauther has a Non-SPDX License. You can download it from GitHub.

This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network. No one seems to care about this huge vulnerability in the official 802.11 WiFi standard, so I took action and enabled everyone who has less than 10 USD to spare to recreate this project. I hope it raises more attention on the issue. In 2009 the WiFi Alliance actually fixed the problem (see 802.11w), but only a few companies implemented it into their devices and software. To effectively prevent a deauthentication attack, both client and access point must support the 802.11w standard with protected management frames (PMF). While most client devices seem to support it when the access point forces it, basically no WiFi access point has it enabled.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              esp8266_deauther has a medium active ecosystem.
              It has 11769 star(s) with 2410 fork(s). There are 626 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 96 open issues and 840 have been closed. On average issues are closed in 193 days. There are 4 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of esp8266_deauther is 2.6.1

            kandi-Quality Quality

              esp8266_deauther has 0 bugs and 0 code smells.

            kandi-Security Security

              esp8266_deauther has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              esp8266_deauther code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              esp8266_deauther has a Non-SPDX License.
              Non-SPDX licenses can be open source with a non SPDX compliant license, or non open source licenses, and you need to review them closely before use.

            kandi-Reuse Reuse

              esp8266_deauther releases are available to install and integrate.
              Installation instructions are available. Examples and code snippets are not available.
              It has 2667 lines of code, 53 functions and 23 files.
              It has high code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of esp8266_deauther
            Get all kandi verified functions for this library.

            esp8266_deauther Key Features

            No Key Features are available at this moment for esp8266_deauther.

            esp8266_deauther Examples and Code Snippets

            No Code Snippets are available at this moment for esp8266_deauther.

            Community Discussions

            QUESTION

            Is it possible to make WIFI scanner on android with API level 29+?
            Asked 2022-Apr-05 at 08:31

            Even with all the permissions granted the startScan() function still returns false. So my question is: is there a way to scan access points on android 29 or higher?

            ...

            ANSWER

            Answered 2022-Apr-05 at 08:31

            The problem was in asking the user for permission. My working code

            -Manifest:

            -And for asking user for permissions I used EasyPermissions:

            Source https://stackoverflow.com/questions/71591990

            QUESTION

            How to check Wi-Fi switch state 'ON' or 'OFF' even if not connected to a WiFi network on Android
            Asked 2022-Apr-04 at 20:41

            I need to develop a feature that is required checking Wi-Fi settings state 'ON' or 'OFF' even if not connected to a WiFi network on Android! I need to display a pop up!

            ...

            ANSWER

            Answered 2022-Apr-01 at 19:12

            I think you should to use ConnectivityManager.

            Source https://stackoverflow.com/questions/71709442

            QUESTION

            Low signal strength in 5Ghz wifi
            Asked 2022-Mar-24 at 12:30

            I've got a router Mikrotik hAP AC2. Recently I've updated RouterOS to version 7.1.3 and have found that 5GHz access point has issues.

            My notebook sometimes disconnects from 5GHz wlan, and one of smartphones in my family doesn't connect to 5GHz at all.

            Here is the plot of wifi signal strength, that I've collected using my notebook located in direct visibility of the router at the distance of about 5-6m.

            Cyan line shows 2.4GHz signal and red line shows 5GHz signal. Numbers are -42dbm for 2.4GHz and -68dbm for 5GHz.

            My impression is that generally this is not normal. I repeat, there were no obstacles between the notebook and the router, only thin air.

            I've tried to reset configuration for 5GHz wlan, change its region, but without success.

            How can I fix this?

            Here are current settings:

            ...

            ANSWER

            Answered 2022-Mar-24 at 12:30

            5GHz Wifi is always lower strength than 2.4GHz, it's physics. 5GHz originally improved performance due to moving away from the then congested 2.4GHz band, however, now 5GHz is just as common so despite having a wider range of frequencies it still ends up congested.

            5GHz allows for higher throughput while having the disadvantage of being attenuated quicker due to the higher frequency

            2.4GHz has a lower data throughput but isn't attenuated as easily.

            Source https://stackoverflow.com/questions/71457688

            QUESTION

            Is the Android Wifi-API really so broken on Android 10+?
            Asked 2022-Mar-22 at 11:19

            I'm working on a Wifi auto connect feature and I am shocked how broken that API is.

            I'm using now 5 different APIs and I still don't get it in a way the user would expect it.

            I have a setting to enable wifi auto connection on Android 10+ I'll try this:

            1. Check if I hold the ACCESS_WIFI_STATE permission with: ...

            ANSWER

            Answered 2022-Mar-22 at 11:19

            Well just a half answer, but it might help anyway. Here is how I get the current SSID of the user (you need to hold the location permission):

            Source https://stackoverflow.com/questions/71549864

            QUESTION

            Is it possible to get mac addresses when scanning networks? ESP32
            Asked 2022-Mar-14 at 10:38

            I need to get the RSSI of the networks and they MAC addresss to a IPS (indoor position system) program. I was able to get ssid, signal strength and security using the sample code, but not mac addresses. I tryed to use this, but itsn't working:

            ...

            ANSWER

            Answered 2021-Oct-06 at 12:02

            Maybe the Arduino framework doesn't give this information up easily, but the underlying ESP IDF framework certainly does. The AP-s MAC is called BSSID. Adapting this example scan.c:

            Source https://stackoverflow.com/questions/69464843

            QUESTION

            Is there a way to generate a wifi qr code with pillow and qrcode library in python?
            Asked 2022-Feb-18 at 02:16

            I think there's a way to generate a wifi qr with pillow and qrcode library in python. I had searched in the internet and there's no information.

            I will apreciate your help. Thank's

            -Zateward

            ...

            ANSWER

            Answered 2022-Feb-18 at 02:16

            Yes there is. QR codes are just images that are easy for a computer to decode via taking a picture into something useful.

            QR codes are just text/strings encoded into an image.

            Python has a library called qrcode.

            Mobile phone support a specific format of text that tells it to try and connect to a wifi network. This wiki shows an example of what that connection string would look like.

            So here is the steps.

            1. Create a wifi connection string that mobile phones support.
            2. Pass that string into qrcode to generate a PIL image.
            3. Do what you want with that PIL image.

            Source https://stackoverflow.com/questions/71167553

            QUESTION

            Why is 802.11 to 802.3 conversion impossible in monitoring mode?
            Asked 2022-Jan-31 at 00:39

            When I use Wireshark to capture traffics with my wlan card with monitor mode already set, it only displays 802.11 frames. However, if I use Wireshark with managed mode wlan(promiscuous mode), it certainly displays 802.3 frames.

            I searched for some related information and found out that 'network bridging' allows devices to convert 802.11 wireless packets to 802.3 packets. In case of packet capturing, pcap allows conversion.
            (link: How to real time convert wireless packet(802.11) to Ethernet packet(802.3) in windows?)

            So, Why is 802.11 to 802.3 frame conversion impossible when using monitor mode(not associated to the wireless network)?

            Below are pictures of the situation. Thank you in advance.

            Promiscuous mode packet capture
            Monitor mode packet capture

            ...

            ANSWER

            Answered 2022-Jan-31 at 00:39

            For one thing, not all 802.11 packets have Ethernet equivalents; only data packets do. In monitor mode, in addition to data packets, control and management packets can be captured - you're seeing those types of packets in your monitor-mode capture.

            For another thing, when capturing in monitor mode on a "protected" network (WEP, WPA), data packets are encrypted (to protect them from being sniffed), and can't be converted to Ethernet packets until they're decrypted. Under some circumstances, Wireshark can decrypt them, but Wireshark doesn't do any conversion from 802.11 to 802.3 in any circumstances - when not capturing in monitor mode, the 802.11 adapter converts data packets to 802.3 packets after decrypting them, and doesn't show non-data packets to the host.

            Source https://stackoverflow.com/questions/70916098

            QUESTION

            B.A.T.M.A.N ad-hoc WiFi nodes cannot ping each other
            Asked 2022-Jan-24 at 00:31

            I am working to connect 2 linux machines, each with this USB Dongle: https://www.tp-link.com/us/home-networking/usb-adapter/archer-t2u-nano/, to an ad-hoc WiFi network managed by B.A.T.M.A.N ( batman-adv ).

            When run, this scripts show that both devices are joined to the same ad-hoc/IBSS network.

            I statically assigned ip addresses and routes to both 'bat0' devices. However, I cannot ping or otherwise use the connection between the two devices.

            What am I doing wrong and how can I use the mesh network in Linux between the connected client and server? Thanks.

            My 'server' node is configured with this script:

            ...

            ANSWER

            Answered 2022-Jan-24 at 00:31

            The answer really is that you need a WiFi radio that actually correclty implements Ad-Hoc/IBSS networking in the driver stack.

            Source https://stackoverflow.com/questions/70311287

            QUESTION

            Multipeer Connectivity - Get file transfer(Internet) speed and File Size in Swift 5
            Asked 2022-Jan-13 at 13:19

            I am transferring photo peer to peer. All things works fine but I am not able to get the photo(file) transfer speed i.g internet speed. Like MB the file is transferred. Second I want to fetch the size of that file.

            We are passing photo in data format using MCSession

            Due to privacy I cannot add the project code here but I will share the refrence github project that I followed. In project I am passing string and In my case its Photo. All things are same.

            I checked in Stackoverflow but not found any accurate answer!

            Reference Project Link: https://github.com/YogeshPateliOS/MultipeerConnectivity-.git

            Thank You!

            ...

            ANSWER

            Answered 2022-Jan-13 at 13:19

            TLDR: If you do not want to read the long explanation and get straight to the code, all the ideas below are brought together and can be tested by downloading my public repository which has comments to explain all of this.

            So here are my suggestions on how you can achieve this

            After reviewing your code, I see that you are using the following function to send data

            Source https://stackoverflow.com/questions/70643079

            QUESTION

            Is there an method to convert wifi frame to ethernet frame?
            Asked 2022-Jan-01 at 13:40

            I've searched for some information about frame structure in wifi and ethernet in the Data Link layer and found out that the two frames look quite different. I am wondering if there is some method in the router that converts wifi frame to ethernet frame in a such network where wireless network is connected to wired network, like WLAN. Since I'm really new to this field, I may have some misunderstanding issues. Thank you.

            ...

            ANSWER

            Answered 2022-Jan-01 at 13:40

            Connecting different or similar networks on the data link layer (L2) is done by a network bridge - you extract relevant data from an ingress frame (esp. source and destination MAC addresses), create a new frame for egress and copy the relevant data into it.

            A bridge also examines each frame's source MAC address to learn where each node is located, so it only copies a frame to the other side when its destination is located there.

            However, a router works on the network layer (L3): it forwards by IP destination address between IP networks/subnets. It uses data link layer (L2) encapsulation for reaching the next hop but doesn't convert anything. (It removes the encapsulating frame from a received packet, decides where to forward the packet, and then creates a new frame for that packet.)

            You might be referring to a consumer-grade Wi-Fi router which effectively contains a NAT router, an Ethernet switch, a wireless access point (mostly bridged), DHCP and DNS servers, etc, blurring the distinction between all those functions.

            Source https://stackoverflow.com/questions/70501968

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install esp8266_deauther

            Please refer to the installation guide in our wiki. If you're just looking for the .bin files, go to releases.

            Support

            This firmware can run on any ESP8266, not however on the ESP32! The most popular development boards, the NodeMCU and Wemos d1 mini, work great for this project.
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/SpacehuhnTech/esp8266_deauther.git

          • CLI

            gh repo clone SpacehuhnTech/esp8266_deauther

          • sshUrl

            git@github.com:SpacehuhnTech/esp8266_deauther.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link

            Explore Related Topics

            Reuse Pre-built Kits with esp8266_deauther

            Consider Popular Wifi Libraries

            esp8266_deauther

            by SpacehuhnTech

            itlwm

            by OpenIntelWireless

            whereami

            by kootenpv

            create_ap

            by oblique

            Try Top Libraries by SpacehuhnTech

            WiFiDuck

            by SpacehuhnTechC++

            DeauthDetector

            by SpacehuhnTechC++

            Huhnitor

            by SpacehuhnTechRust

            SimpleCLI

            by SpacehuhnTechC++

            HackHeld

            by SpacehuhnTechHTML