Flash | A test service to mock slow server responses | Mock library

 by   siwalikm HTML Version: v1.1.0 License: MIT

kandi X-RAY | Flash Summary

kandi X-RAY | Flash Summary

Flash is a HTML library typically used in Testing, Mock applications. Flash has no bugs, it has no vulnerabilities, it has a Permissive License and it has low support. You can download it from GitHub.

Flash lets you simulate a slow server response, when you make a request. This can come handy while testing how your application responds to a slow external service or API. Right now Flash supports only GET requests with configurable delay and URL parameters. Using Flash is really easy. eg. On visiting You'll be redirected to api.github.com's response after a 5000ms delay.
Support
    Quality
      Security
        License
          Reuse

            kandi-support Support

              Flash has a low active ecosystem.
              It has 8 star(s) with 7 fork(s). There are 3 watchers for this library.
              OutlinedDot
              It had no major release in the last 12 months.
              There are 2 open issues and 2 have been closed. There are 2 open pull requests and 0 closed requests.
              It has a neutral sentiment in the developer community.
              The latest version of Flash is v1.1.0

            kandi-Quality Quality

              Flash has no bugs reported.

            kandi-Security Security

              Flash has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

            kandi-License License

              Flash is licensed under the MIT License. This license is Permissive.
              Permissive licenses have the least restrictions, and you can use them in most projects.

            kandi-Reuse Reuse

              Flash releases are available to install and integrate.
              Installation instructions, examples and code snippets are available.

            Top functions reviewed by kandi - BETA

            kandi's functional review helps you automatically verify the functionalities of the libraries and avoid rework.
            Currently covering the most popular Java, JavaScript and Python libraries. See a Sample of Flash
            Get all kandi verified functions for this library.

            Flash Key Features

            No Key Features are available at this moment for Flash.

            Flash Examples and Code Snippets

            Dev Setup
            HTMLdot img1Lines of Code : 5dot img1License : Permissive (MIT)
            copy iconCopy
            $ git clone git@github.com:siwalikm/Flash.git
            $ cd Flash
            $ npm install
            $ npm start
            
            $ npm test
              
            Request Structures
            HTMLdot img2Lines of Code : 2dot img2License : Permissive (MIT)
            copy iconCopy
            https://flash-the-slow-api.herokuapp.com/delay/{delay_time}
            
            https://flash-the-slow-api.herokuapp.com/delay/{delay_time}/url/{url}
              
            Blizzard Flash .
            javascriptdot img3Lines of Code : 12dot img3no licencesLicense : No License
            copy iconCopy
            function blizzardFan() {
              const isFan = true;
              let phrase = 'Warcraft'; // {4}
              console.log('Before if: ' + phrase);
              if (isFan) {
                let phrase = 'initial text'; // {5}
                phrase = 'For the Horde!'; // {6}
                console.log('Inside if: ' + phras  
            Show a flash message
            javadot img4Lines of Code : 5dot img4License : Permissive (MIT License)
            copy iconCopy
            public Result showFlashMsg(FlashScope flashScope) {
                    flashScope.success("Success message");
                    flashScope.error("Error message");
                    return Results.redirect("/home");
                }  

            Community Discussions

            QUESTION

            Problem with FULLY_CONNECTED op in TF Lite
            Asked 2021-Jun-15 at 13:22

            I'd like to run a simple neural network model which uses Keras on a Rasperry microcontroller. I get a problem when I use a layer. The code is defined like this:

            ...

            ANSWER

            Answered 2021-May-25 at 01:08

            I had the same problem, man. I want to transplant tflite to the development board of CEVA. There is no problem in compiling. In the process of running, there is also an error in AddBuiltin(full_connect). At present, the only possible situation I guess is that some devices can not support tflite.

            Source https://stackoverflow.com/questions/67677228

            QUESTION

            How to use bootstrap modal for update the data?
            Asked 2021-Jun-15 at 07:47

            I am working on e-commerce app using ejs template and nodejs as backend . In that I have admin role for administrative work . I create Bootstrap modal for update the order status . But I am able to only update the first order , if I try to any other order only first order gets update . Can anyone please help me to sort out this problem .

            allOrders.ejs (list of orders & modal)

            ...

            ANSWER

            Answered 2021-Jun-15 at 07:47

            The problem exists inside the for loop. In your loop you have a button with an attribute data-bs-target="#exampleModal". That means all rows in your table will have the same button which triggers the modal with id exampleModal. All these button will call the same modal.

            Apart from this, each order generates a modal with a specific id exampleModal. So all modals have the same id. That's why you always open the first modal. Each modal must have a unique id

            To fix this problem, you should give unique ids to modals, for example

            Source https://stackoverflow.com/questions/67948350

            QUESTION

            How to remove VIM as my Mac editor vs sublime
            Asked 2021-Jun-15 at 06:57

            How to remove VIM (completely) and change my mac command line editor to sublime?

            I've spent the last three hours reading the same links on "how to remove VIM" only to get "how to remove MacVIM and reinstall it fresh" Or "How to remove Vim so I can reinstall it on Ubuntu"

            My old laptop was fortunate to have a friend remove it but my new machine still has it installed.

            I wish VIM would die in "words redacted to excessive profanity" dumpster fire while a hobo "words redacted to excessive profanity" to put out the fire

            I've lost way too many hours trying to learn that outdated neckbeard elvish piece of UX trash so I want it gone. No, I'm not touching emacs.

            Please tell me there is a way I can switch to sublime or am I permanently cursed to have this confusing black screen of death pop up when I try to git push or git tag stuff?

            My original goal was to tag a git and push it but vim comes up and I can't figure out how to speak elvish.

            I've been using PyCharm for a few years and love the interface but I need to dig deeper and a TDD Django book for class uses the terminal, it wants me to git -a "comments" so I need your advice.

            So now I can't learn TDD Django because vim, MacVim and eMacs users flood the internet but I can't remove it nor figure out how to work it.

            I've tried brew uninstall macvim which doesn't work because I have vim not macvim

            I also tried sudo uninstall vim no luck as this is zsh mac not ubuntu

            I tried brew uninstall vim to get No available formula or cask with the name "vim"

            I've searched SO five times and keep getting the same links. Alternates I've tried brew uninstall ruby vim

            per this post https://superuser.com/questions/1096438/brew-upgrade-broke-vim-on-os-x-dyld-library-not-loaded I tried, no luck.

            ...

            ANSWER

            Answered 2021-Jun-14 at 21:41

            You don't have to remove Vim from your machine. Instead, tell your system and your tools to use Sublime Text as default editor. After you have followed that tutorial, which I must point out is part of Sublime Text's documentation, you should have a system-wide subl command that you can use instead of vim. For that, you need to add those lines to your shell configuration file:

            Source https://stackoverflow.com/questions/67977280

            QUESTION

            Swapping Characters inside an array C++
            Asked 2021-Jun-14 at 19:44

            I'm looking to make a series of flashing lights and I want them to appear on the same line.

            Something like this

            ...

            ANSWER

            Answered 2021-Jun-14 at 19:31

            I am not sure that it is possible for multiple lines, but for one, this is the way in linux:

            Source https://stackoverflow.com/questions/67976089

            QUESTION

            STM32H743VI jumps randomly in a nonflashable state
            Asked 2021-Jun-14 at 11:54

            we are using a STM32H743VIT6 on a custom board with a JLink debugger. Out of the blue the processor jumps in a state where it isn't possible to flash the ECU anymore. The board is running but nether JMem nor our IDE (uVision) are able to access or detect the controller. Has anyone else encountered this behaviour so far? Google wasn't helpful either.

            ...

            ANSWER

            Answered 2021-May-30 at 19:21

            It is almost impossible to archive unless you enable RDP (which is very hard to archive if it was not the intention of the programmer).

            You probably have screw-up the board design. You should have pull-up resistors on the debug lines and NRST connected to the programmer.

            If you do not have NRST available simple solder the wire to the NRST, and when the programming probe connects to the uC, connect it to the GND.

            If the NRST line is connected to the programmer you need to select nn the configuration "Connect under Reset"

            Source https://stackoverflow.com/questions/67763793

            QUESTION

            How to save data on different database tables in Laravel Backpack
            Asked 2021-Jun-13 at 17:37

            how to save the data from the Features fields on a different table. Example in the link below, it is saving the Features table fields in a JSON field in the database. However, I want to save this data from the features into another table.

            https://demo.backpackforelavel.com/admin/product/211/Edit

            I'm coming back here to post my answer. I managed to settle, I'm putting here to help other developers.

            This first part of the question I have already solved. But now I can not bring the data from the Features fields in the form.

            Below is the source code that I was able to save and edit the form data. However, I can not carry the data from the Feature fields. Someone knows how I can carry the field data in Feature

            ...

            ANSWER

            Answered 2021-Jun-13 at 17:37

            There are a few ways to go about it. Personally I prefer to create accessors and mutators in the model - https://laravel.com/docs/8.x/eloquent-mutators . Not only does it keep the CrudController clean (so updateable) but it also allows you to save/load stuff from other forms (ex: user-facing forms).

            Source https://stackoverflow.com/questions/67914395

            QUESTION

            ESP32 "No such file or directory" for native ESP-IDF component
            Asked 2021-Jun-12 at 15:42

            I'm trying to port the file_serving example to use HTTPS.

            I've attempted to move the spiff file server functionality to the existing https_server example inside esp-idf but I get the error: httpd_server_init: error in creating ctrl socket (112)

            I realize that this is probably not the easiest way to do it and instead I should work on re-writing the original file_serving example code to use https instead. The function to start the server is in the file_server.c:

            ...

            ANSWER

            Answered 2021-Jun-12 at 15:42

            My supervising professor had a look at the problem and found the solution. Here are the changes that were needed to be made:

            Include the following line in the sdkconfig file: CONFIG_ESP_HTTPS_SERVER_ENABLE=y

            “config” instead of “conf” in the file file_server.c and the configuration for the http server is a subcomponent of the https configuration and needs a "httpd.” after the “config.”:

            Source https://stackoverflow.com/questions/67791861

            QUESTION

            React - setTimeout inside promise flashes UI elements, randomly returns array undefined
            Asked 2021-Jun-12 at 08:01

            I'm trying to make a tic-toc game without using classes and with player-computer. The whole code in codesandbox.io

            The piece of code, where the problems appear:

            ...

            ANSWER

            Answered 2021-Jun-12 at 08:01

            There are few things that need to be fixed.

            1. In your handleClick, you are using setSquares((squares) => squares.splice(i, 1, "X")). squares.splice will mutate the state variable squares which one should never do.
            2. Also splice doesn't return updated array but

            An array containing the deleted elements.

            This causes squares from [null, null, null, null, null, null, null, null, null] to [null] causing you board to become blank for a moment. Then your setSquares((squares) => [...squares2]) kicks in from setTimeout making squares back to array making your square values visible again hence, the flash.

            1. computersTurnHandler might return undefined in some cases where none of the return statements trigger hence

            Uncaught TypeError: squares2 is undefined handleClick Board.js:34

            1. You need to prevent user from clicking until your setTimeout is complete else multiple rapid clicks by user will cause inconsistent behaviour.

            As for your query

            is it acceptable at all to use Promises in that case

            Usually situations like these can simply be solved by making use of temporary variable in most cases.

            Now the Solution with promise and fixed handleClick and computersTurnHandler is as follows

            Source https://stackoverflow.com/questions/66943500

            QUESTION

            Bootstrap select2 in livewire keeps disappearing when I submit the form
            Asked 2021-Jun-11 at 22:01

            I have a problem with my code the select2 is displaying only once when I refresh the page but it disappears when I submit the form or if there was a validation error it will disappear too. I tried wire:ignore The select2 doesn't disappear but it stops working properly and the form considered it like if it doesn't exist. I use laravel 8, livewire 2 and turbolinks. Any help would be appreciated I've been stuck for almost 2 weeks. Here is my code :

            Blade:

            ...

            ANSWER

            Answered 2021-Jun-11 at 13:15

            Normally for select2 in Livewire I use hydration for element's rerender.

            Source https://stackoverflow.com/questions/67936542

            QUESTION

            Upload in heroku fails
            Asked 2021-Jun-11 at 14:42

            i made this application and i wanted to host it. I choose heroku But got following error during the build

            Error: Cannot find module '/tmp/build_dcf81a5e/index.js'

            NOTE: i'm not using vue next react or any other kind of js i simply used Node js

            If anyone wants the whole log please view these pics
            [Log part 1(Builds) https://i.stack.imgur.com/xSKbt.png]

            [log part 2 (Error occurs) https://i.stack.imgur.com/tz8gL.png]

            If required use my git repo for src https://github.com/rohanCoderMan/AceBook Package.json as follows

            ...

            ANSWER

            Answered 2021-Jun-11 at 14:16

            First off, check the heroku docs to see the deployment cycle. Basically, the build script is ran after installing the packages (this is typically for bundling the frontend code but sometimes also for compiling the server code like if you've used TypeScript). Since you don't have any build being done, you should take out that line in your package.json file. (Esentially, what you'd done here was start your server twice)

            Also, Heroku has it's own process monitor so no need to use nodemon. Change the start script to node app.js. You could also add a dev script that uses nodemon for your local development, then you'd run it using npm run dev.

            So in summary, change the scripts config in your package.json file to below:

            Source https://stackoverflow.com/questions/67937784

            Community Discussions, Code Snippets contain sources that include Stack Exchange Network

            Vulnerabilities

            No vulnerabilities reported

            Install Flash

            If you're using vs-code for development, I've already included the launch.json scripts for running app and test server in debug mode.

            Support

            For contributing, please raise a pull request with your code and test. You can also contribute by reporting issues and adding feature requests.
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
            CLONE
          • HTTPS

            https://github.com/siwalikm/Flash.git

          • CLI

            gh repo clone siwalikm/Flash

          • sshUrl

            git@github.com:siwalikm/Flash.git

          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link