okir | helper class that implements both an Espresso IdlingResource | Model View Controller library

by rafaeltoledo Java Version: Current License: Apache-2.0

X-Ray Key Features Code Snippets Community Discussions(2)Vulnerabilities Install Support

kandi X-RAY | okir Summary

okir is a Java library typically used in Architecture, Model View Controller applications. okir has no bugs, it has no vulnerabilities, it has build file available, it has a Permissive License and it has low support. You can download it from GitHub.

A helper class that implements both an Espresso IdlingResource and an OkHttp 2 and 3 `Interceptor`s.

Support

Quality

Security

License

Reuse

Support

okir has a low active ecosystem.

It has 28 star(s) with 2 fork(s). There are 4 watchers for this library.

It had no major release in the last 6 months.

There are 1 open issues and 0 have been closed. There are no pull requests.

It has a neutral sentiment in the developer community.

The latest version of okir is current.

Quality

okir has 0 bugs and 0 code smells.

Security

okir has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.

okir code analysis shows 0 unresolved vulnerabilities.

There are 0 security hotspots that need review.

License

okir is licensed under the Apache-2.0 License. This license is Permissive.

Permissive licenses have the least restrictions, and you can use them in most projects.

Reuse

okir releases are not available. You will need to build from source code and install.

Build file is available. You can build the component from source.

Installation instructions, examples and code snippets are available.

Top functions reviewed by kandi - BETA

kandi has reviewed okir and discovered the below as its top functions. This is intended to give you an instant insight into okir implemented functionality, and help decide if they suit your requirements.

Initializes the instance
Returns the OkHttpClient
Intercept a HTTP request chain
Process a request
Returns true if transition is currently idle
Get atomic counter
Create a clone of OkHttpClient
Wrap the OkHttp3 client
Intercept the request
Gets the name of the resource name
Gets the resource name

Get all kandi verified functions for this library.

okir Key Features

No Key Features are available at this moment for okir.

okir Examples and Code Snippets

No Code Snippets are available at this moment for okir.

Community Discussions

Trending Discussions on okir

Having trouble stopping U-Boot autoboot

USB: why USB devices the modules automatically loaded

QUESTION

Having trouble stopping U-Boot autoboot

Asked 2021-Apr-22 at 15:51

Background:

I have an old Seagate BlackArmor NAS 110 that I'm trying to install Debian on by following the instructions here: https://github.com/hn/seagate-blackarmor-nas.

I have a couple of USB to TTL serial adapters (one FTDI chipset and the other Prolific) that I've tried and have run into the same issue with both. I have made the connection to the serial port on the board of the NAS using a multimeter to make sure I've gotten the pinout correct.

Problem:

I'm not able to stop the autoboot process by pressing keys and any point during the boot process. The device also does not seem to respond to any keystrokes although they are echoed back.

What I've Tried So Far:

Using USB to TTL serial adapters with two different chipsets
Using the adapters on two different computers (MacBook Pro and a ThinkPad)
Using different operating systems (MacOS, Windows 10, Ubuntu 20.04)
Using different terminal programs (Screen, Minicom, Putty)
Turned off hardware and software flow control
Tested output of adapters by shorting RX and TX pins and seeing keystrokes echoed back
Commands seem to be sent to device as when I type I see my commands echoed back (not sure if this is supposed to happen)

I've been at this for a few days and can't figure it out. I've also recorded my screen while experiencing the issue: https://streamable.com/xl43br. Can anyone see where I'm going wrong?

Terminal output while experiencing the problem:

...

ANSWER

Answered 2021-Apr-22 at 15:51

So it turns out there is a short somewhere between the RX pin and the +3.3V pin which is not allowing me to send anything to the board. Thank you to those who have commented.

Source https://stackoverflow.com/questions/67169585

QUESTION

USB: why USB devices the modules automatically loaded

Asked 2020-Jul-11 at 14:41

I have am335x related customized board and kernel(4.4.16) source code I configure the FTDI module driver. so after kernel start successfully I attach ftdi converter to usb port and then type lsmod command to check module list

...

ANSWER

Answered 2020-Jul-11 at 14:41

As you can see in the dmesg output:

[ 5.379690] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60

Looking that up, e.g. here: https://www.google.com/search?q=usb%20vendor%20id%2010c4

Tells you that it's a "Silicon Labs" USB device, who also make the CP2102.

The log does not identify other devices (ignore the linux kernel root hub). So either you have also a CP2102 attached (and the FTDI is not properly connected) or the device you think is a FTDI based device, is not.

In addition you can identify currently enumerated devices using the lsusb command.

The automatic loading is usually done by udev or a similar user space daemon/mechanism. A decent explanation can be found e.g. here: https://lwn.net/Articles/740455/

Source https://stackoverflow.com/questions/62835556

Community Discussions, Code Snippets contain sources that include Stack Exchange Network

Vulnerabilities

No vulnerabilities reported

Install okir

The library is available on JCenter. Add the library as an Android Test dependency:.

Support

For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .

Find more information at: