sample-spring-microservices-new | Spring Cloud microservices with distributed configuration | Microservice library

 by   piomin Java Version: Current License: No License

kandi X-RAY | sample-spring-microservices-new Summary

kandi X-RAY | sample-spring-microservices-new Summary

sample-spring-microservices-new is a Java library typically used in Architecture, Microservice, Spring Boot applications. sample-spring-microservices-new has no bugs, it has no vulnerabilities, it has build file available and it has medium support. You can download it from GitHub.

Demo for Spring Boot 2 and Spring Cloud microservices with distributed configuration (Spring Cloud Config), service discovery (Eureka), API gateway (Spring Cloud Gateway, Zuul), Swagger2 API documentation, logs correlation using Spring Cloud Sleuth and many more

            kandi-support Support

              sample-spring-microservices-new has a medium active ecosystem.
              It has 921 star(s) with 653 fork(s). There are 67 watchers for this library.
              It had no major release in the last 6 months.
              There are 1 open issues and 18 have been closed. On average issues are closed in 135 days. There are no pull requests.
              It has a neutral sentiment in the developer community.
              The latest version of sample-spring-microservices-new is current.

            kandi-Quality Quality

              sample-spring-microservices-new has 0 bugs and 0 code smells.

            kandi-Security Security

              sample-spring-microservices-new has no vulnerabilities reported, and its dependent libraries have no vulnerabilities reported.
              sample-spring-microservices-new code analysis shows 0 unresolved vulnerabilities.
              There are 0 security hotspots that need review.

            kandi-License License

              sample-spring-microservices-new does not have a standard license declared.
              Check the repository for any license declaration and review the terms closely.
              Without a license, all rights are reserved, and you cannot use the library in your applications.

            kandi-Reuse Reuse

              sample-spring-microservices-new releases are not available. You will need to build from source code and install.
              Build file is available. You can build the component from source.
              Installation instructions are available. Examples and code snippets are not available.
              sample-spring-microservices-new saves you 603 person hours of effort in developing the same functionality from scratch.
              It has 1250 lines of code, 125 functions and 31 files.
              It has low code complexity. Code complexity directly impacts maintainability of the code.

            Top functions reviewed by kandi - BETA

            kandi has reviewed sample-spring-microservices-new and discovered the below as its top functions. This is intended to give you an instant insight into sample-spring-microservices-new implemented functionality, and help decide if they suit your requirements.
            • Find Employee
            • Gets the departmentId
            • Find employees by the given ID
            • Gets the organization with the given id
            • Set the list of department names
            • Find all Organization
            • Returns all organizations
            • Finds all department with the given organization
            • Set the list of employees
            • Create the DepartmentRepository
            • Add a department
            • Find by organization
            • Finds a Department by id
            • The database
            • Find all Department
            • Find all employees
            • Main entry point
            • The main entry point for the Department application
            • Add an Employee
            • Retrieves an Employee by its id
            • The list of api groups
            • Find all jobs for an organization
            • Add an organization
            • Returns the organization with the given id
            • Returns the organization with the given ID
            • Default organization
            Get all kandi verified functions for this library.

            sample-spring-microservices-new Key Features

            No Key Features are available at this moment for sample-spring-microservices-new.

            sample-spring-microservices-new Examples and Code Snippets

            No Code Snippets are available at this moment for sample-spring-microservices-new.

            Community Discussions


            Exclude Logs from Datadog Ingestion
            Asked 2022-Mar-19 at 22:38

            I have a kubernetes cluster that's running datadog and some microservices. Each microservice makes healthchecks every 5 seconds to make sure the service is up and running. I want to exclude these healthcheck logs from being ingested into Datadog.

            I think I need to use log_processing_rules and I've tried that but the healthcheck logs are still making it into the logs section of Datadog. My current Deployment looks like this:



            Answered 2022-Jan-12 at 20:28

            I think the problem is that you're defining multiple patterns; the docs state, If you want to match one or more patterns you must define them in a single expression.

            Try somtething like this and see what happens:



            Custom Serilog sink with injection?
            Asked 2022-Mar-08 at 10:41

            I have create a simple Serilog sink project that looks like this :



            Answered 2022-Feb-23 at 18:28

            If you refer to the Provided Sinks list and examine the source code for some of them, you'll notice that the pattern is usually:

            1. Construct the sink configuration (usually taking values from IConfiguration, inline or a combination of both)
            2. Pass the configuration to the sink registration.

            Then the sink implementation instantiates the required services to push logs to.

            An alternate approach I could suggest is registering Serilog without any arguments (UseSerilog()) and then configure the static Serilog.Log class using the built IServiceProvider:



            How to manage Google Cloud credentials for local development
            Asked 2022-Feb-14 at 23:35

            I searched a lot how to authenticate/authorize Google's client libraries and it seems no one agrees how to do it.

            Some people states that I should create a service account, create a key out from it and give that key to each developer that wants to act as this service account. I hate this solution because it leaks the identity of the service account to multiple person.

            Others mentioned that you simply log in with the Cloud SDK and ADC (Application Default Credentials) by doing:



            Answered 2021-Oct-02 at 14:00

            You can use a new gcloud feature and impersonate your local credential like that:



            using webclient to call the grapql mutation API in spring boot
            Asked 2022-Jan-24 at 12:18

            I am stuck while calling the graphQL mutation API in spring boot. Let me explain my scenario, I have two microservice one is the AuditConsumeService which consume the message from the activeMQ, and the other is GraphQL layer which simply takes the data from the consume service and put it inside the database. Everything well when i try to push data using graphql playground or postman. How do I push data from AuditConsumeService. In the AuditConsumeService I am trying to send mutation API as a string. the method which is responsible to send that to graphQL layer is



            Answered 2022-Jan-23 at 21:40

            You have to send the query and body as variables in post request like shown here



            Jdeps Module java.annotation not found
            Asked 2022-Jan-20 at 22:48

            I'm trying to create a minimal jre for Spring Boot microservices using jdeps and jlink, but I'm getting the following error when I get to the using jdeps part



            Answered 2021-Dec-28 at 14:39

            I have been struggling with a similar issue In my gradle spring boot project I am using the output of the following for adding modules in jlink in my dockerfile with (openjdk:17-alpine):



            How to make a Spring Boot application quit on tomcat failure
            Asked 2022-Jan-15 at 09:55

            We have a bunch of microservices based on Spring Boot 2.5.4 also including spring-kafka:2.7.6 and spring-boot-actuator:2.5.4. All the services use Tomcat as servlet container and graceful shutdown enabled. These microservices are containerized using docker.
            Due to a misconfiguration, yesterday we faced a problem on one of these containers because it took a port already bound from another one.
            Log states:



            Answered 2021-Dec-17 at 08:38

            Since you have everything containerized, it's way simpler.

            Just set up a small healthcheck endpoint with Spring Web which serves to see if the server is still running, something like:



            Deadlock on insert/select
            Asked 2021-Dec-26 at 12:54

            Ok, I'm totally lost on deadlock issue. I just don't know how to solve this.

            I have these three tables (I have removed not important columns):



            Answered 2021-Dec-26 at 12:54

            You are better off avoiding serializable isolation level. The way the serializable guarantee is provided is often deadlock prone.

            If you can't alter your stored procs to use more targeted locking hints that guarantee the results you require at a lesser isolation level then you can prevent this particular deadlock scenario shown by ensuring that all locks are taken out on ServiceChange first before any are taken out on ServiceChangeParameter.

            One way of doing this would be to introduce a table variable in spGetManageServicesRequest and materialize the results of



            Rewrite host and port for outgoing request of a pod in an Istio Mesh
            Asked 2021-Nov-17 at 09:30

            I have to get the existing microservices run. They are given as docker images. They talk to each other by configured hostnames and ports. I started to use Istio to view and configure the outgoing calls of each microservice. Now I am at the point that I need to rewrite / redirect the host and the port of a request that goes out of one container. How can I do that with Istio?

            I will try to give a minimum example. There are two services, service-a and service-b.



            Answered 2021-Nov-16 at 10:56

            There are two solutions which can be used depending on necessity of using istio features.

            If no istio features are planned to use, it can be solved using native kubernetes. In turn, if some istio feature are intended to use, it can be solved using istio virtual service. Below are two options:

            1. Native kubernetes

            Service-x should be pointed to the backend of service-b deployment. Below is selector which points to deployment: service-b:



            Checking list of conditions on API data
            Asked 2021-Aug-31 at 00:23

            I am using an API which is sending some data about products, every 1 second. on the other hand I have a list of user-created conditions. And I want to check if any data that comes, matches any of the conditions. and if so, I want to notify the user.

            for example , user condition maybe like this : price < 30000 and productName = 'chairNumber2'

            and the data would be something like this : {'data':[{'name':'chair1','price':'20000','color':blue},{'name':'chairNumber2','price':'45500','color':green},{'name':'chairNumber2','price':'27000','color':blue}]

            I am using microservice architecture, and on validating condition I am sending a message on RabbitMQ to my notification service

            I have tried the naïve solution (every 1 second, check every condition , and if any data meets the condition then pass on data my other service) but this takes so much RAM and time(time order is in n*m,n being the count of conditions, and m is the count of data), so I am looking for a better scenario



            Answered 2021-Aug-31 at 00:23

            It's an interesting problem. I have to confess I don't really know how I would do it - it depends a lot on exactly how fast the processing needs to occur, and a lot of other factors not mentioned - such as what constraints to do you have in terms of the technology stack you have, is it on-premise or in the cloud, must the solution be coded by you/your team or can you buy some $$ tool. For future reference, for architecture questions especially, any context you can provide is really helpful - e.g. constraints.

            I did think of Pub-Sub, which may offer patterns you can use, but you really just need a simple implementation that will work within your code base, AND very importantly you only have one consuming client, the RabbitMQ queue - it's not like you have X number of random clients wanting the data. So an off-the-shelf Pub-Sub solution might not be a good fit.

            Assuming you want a "home-grown" solution, this is what has come to mind so far:

            ("flow" connectors show data flow, which could be interpreted as a 'push'; where as the other lines are UML "dependency" lines; e.g. the match engine depends on data held in the batch, but it's agnostic as to how that happens).

            • The external data source is where the data is coming from. I had not made any assumptions about how that works or what control you have over it.
            • Interface, all this does is take the raw data and put it into batches that can be processed later by the Match Engine. How the interface works depends on how you want to balance (a) the data coming in, and (b) what you know the match engine expects.
            • Batches are thrown into a batch queue. It's job is to ensure that no data is lost before its processed, that processing can be managed (order of batch processing, resilience, etc).
            • Match engine, works fast on the assumption that the size of each batch is a manageable number of records/changes. It's job is to take changes and ask who's interested in them, and return the results to the RabbitMQ. So its inputs are just the batches and the user & user matching rules (more on that later). How this actually works I'm not sure, worst case it iterates through each rule seeing who has a match - what you're doing now, but...

            Key point: the queue would also allow you to scale-out the number of match engine instances - but, I don't know what affect that has downstream on the RabbitMQ and it's downstream consumers (the order in which the updates would arrive, etc).

            What's not shown: caching. The match engine needs to know what the matching rules are, and which users those rules relate to. The fastest way to do that look-up is probably in memory, not a database read (unless you can be smart about how that happens), which brings me to this addition:

            • Data Source is wherever the user data, and user matching rules, are kept. I have assumed they are external to "Your Solution" but it doesn't matter.
            • Cache is something that holds the user matches (rules) & user data. It's sole job is to hold these in a way that is optimized for the Match Engine to work fast. You could logically say it was part of the match engine, or separate. How you approach this might be determined by whether or not you intend to scale-out the match engine.
            • Data Provider is simply the component whose job it is to fetch user & rule data and make it available for caching.

            So, the Rule engine, cache and data provider could all be separate components, or logically parts of the one component / microservice.



            Traefik v2 reverse proxy without Docker
            Asked 2021-Jul-14 at 10:26

            I have a dead simple Golang microservice (no Docker, just simple binary file) which returns simple message on GET-request.



            Answered 2021-Jul-14 at 10:26

            I've managed to find the answer.

            1. I'm not that smart if I've decided that Traefik would take /proxy and simply redicrect all request to /api/*. The official docs ( says that (I'm quoting):

            Use Path if your service listens on the exact path only. For instance, Path: /products would match /products but not /products/shoes.

            Use a Prefix matcher if your service listens on a particular base path but also serves requests on sub-paths. For instance, PathPrefix: /products would match /products but also /products/shoes and /products/shirts. Since the path is forwarded as-is, your service is expected to listen on /products.

            1. I did not use any middleware for replacing substring of path

            Now answer as example.

            First at all: code for microservice in main.go file


            Community Discussions, Code Snippets contain sources that include Stack Exchange Network


            No vulnerabilities reported

            Install sample-spring-microservices-new

            Currently you may find here some examples of microservices implementation using different projects from Spring Cloud. All the examples are divided into the branches and described in a separated articles on my blog. Here's a full list of available examples:.
            Using Spring Cloud Netlix Eureka as a discovery server, Zuul as a gateway, OpenFeign for communication and Spring Cloud Config Server. The example is available in the branch master. A detailed guide may be find in the following article: Quick Guide to Microservices with Spring Boot 2.0, Eureka and Spring Cloud
            Using Spring Cloud Alibaba Nacos as a discovery and configuration server, Zuul and OpenFeign. The example is available in the branch alibaba. A detailed guide may be find in the following article: Microservices with Spring Cloud Alibaba
            Using Spring Cloud with Spring Boot support for GraphQL for building microservices, Apollo for inter-service communication and Eureka as a discovery server. The example is available in the branch graphql. A detailed guide may be find in the following article: GraphQL – The Future of Microservices?
            Using Spring Boot and partially Spring Cloud for building microservices deployed on OpenShift with Source-2-Image mechanism. The example is available in the branch openshift. A detailed guide may be find in the following article: Running Java Microservices on OpenShift using Source-2-Image
            Using Trampoline for managing group of Spring Boot microservices locally. The example is available in the branch trampoline. A detailed guide may be find in the following article: Managing Spring Boot apps locally with Trampoline


            For any new features, suggestions and bugs create an issue on GitHub. If you have any questions check and ask questions on community page Stack Overflow .
            Find more information at:

            Find, review, and download reusable Libraries, Code Snippets, Cloud APIs from over 650 million Knowledge Items

            Find more libraries
          • HTTPS


          • CLI

            gh repo clone piomin/sample-spring-microservices-new

          • sshUrl


          • Stay Updated

            Subscribe to our newsletter for trending solutions and developer bootcamps

            Agree to Sign up and Terms & Conditions

            Share this Page

            share link